Manual

]_or more convenient Direct
I * r
1 _ playback connecttons the TV s
Front Audio/Video lnput panel can
be used. Located next to the TV's
front control panel (under a small
cover door) these Input jacks allow
for quick and easy connections,
particularly for the playback of
Camcorder tape recordings.
To view the playback of a
Camcorder recording using the
Audio/Video Input jacks on the
from of the "IV:
Connect the VIDEO OUT jack
from the Camcorder to the Front
VIDEO IN jack on the TV.
"M > Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
Camcorder to the Front AUDIO IN
jacks on the "IV.
Select the "AUX 3"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the RED..highlight
with the MENU (M) _ buttons.
Then press the MENU button.
_ Press the MENU AY and
MENU (M) buttons to highlight
and select (v,w)the AUX 3 mode.
_Turn the Camcorder ON and
press PLAY to view the tape on
the "IV.
Remember, after it is
liconnected an easy way to
select the AUX 3 mode is to press
the VCR button on the front of the
TV (or the TV/VCR button on the
remote). Channels 3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected in this
way.
If you have added AUX 3 to the
TV's channel memory (see page
14), just press the CHANNEL
AT buttons to select the
VCR/AUX mode.
29
PICTURE AND SOUND FROM PLAYBACK
FRONT AUDIO/VIDEO JACKS
O O (_ LiftUponJackpanelCoverPInte
to expose Input Jacks.
AUDIO/VIDEO
OUTPUT JACKS
ON CAMCORDER
CAMCORDER
If you have a single (monaural)
Audio Output C&mcorder, ,nd,,
connectors are available to complete
your cormection. Contact your
any optional accessories.
dealer, or our P_ffts Information
Center (1-800-292-6066) to order