Manual

Z.he picture for the PIP window
an come through either the
ANT(enna) A / B Inputs or the AUX
1/2/3 Inputs (on the front and rear
of the TV). PIP Picture Source
simply tells the TV which one of
these sources it is to short, in the
PIP window.
Select PIP SOURCE control.
With FEATURES MENU (4 of 5)
on screen, move the RED highlight
with the MENU (M)4-1, buttons.
Then press the MENU button.
<_ Press the MENU .Y and
MENU (M) buttons to highlight
and select the desired (v') PIP
Picture Source.
ANT A or B- for a picture signal
coming from either the ANT(enna)
A or B Input plu_ on the TV.
Note: The remote control's [_
button can also be used to quickly
swap between the p_cture sources
for the TV's Main screen and the
iPIP window.
AUX 1- for a picture signal
coming from the AUX IN 1 Video
Input jack on the rear of the TV.
AUX 2- for a picture signal
coming from the AUX IN 2 Video
Input jack on the rear of the TV.
AUX 3- for a picture signal coming
from the Video Input jack on the
front of the TV.
<_ Press the STATUS button to
I clear the screen e
Remember, the PIP
window will be blank unless
a signal is connected to the
selected PIP Picture Source (ANT
B, AUX I/2/3, etc.) on the rear of
the set.
If you see the same picture on the
main screen and in the PIP
window, you may have the Main
Screen and PIP window set to the
same video input source.
_-- MAIN MENLJ • _ ......
45
• =- FEATURE MENU ......
1'@: 5_',
f
_-- , FEATURE MENU
€
--= FEATUR E MENU ----
_ 40F5--
_-- pip SOURCE _&._
ANT A
AUX1
AUX2
AUX3