Manual

_ DIP hookup with Cable
1Converter Box and VCR.
_ _ First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE lN on the Cable Converter
and the ANTENNA plug on the
rear of the TV.
,_ Connect the CABLE OUT
on
the Converter to the ANT. IN on
the VCR.
_ _ Connect the VIDEO OUT
jack on the VCR to the VIDEO
IN jack on the TV.
Also connect the AUDIO OUT (R
and L) jacks from the VCR to the
AUDIO IN jacks on the TV.
O
REAR OF TV
Remember
to use the Cable TV
Converter Box to
I select channels for
PIP, the VCR most
I be set to the same
channel as the
channel selection
switch on the rear of
the Cable Converter
(either channel 3 or
4).
SIGNAL
SPLrVI'ER
Contact the Parts
In fomlatJon Cenler
I 800 292-6066
to order any optional
®
AUDIO VIDEO
CABLES SUPPLIED
CABLE TV CONVERTER
47