Manual

Tjhe TV's Audio/Video Input
acks are for direct picture and
sound connections between the 73/
and a VCR (or Video Disc Player,
etc.) that has Audio/Video Output
jacks.
To view the playback of a VCR
tape by using the Audio/Video
Input jacks on the TV:
_ Connect the VIDEO OUT jack
from the VCR to the AUX 1
VIDEO IN jack on the TV.
_ Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
VCR to the AUX 1 AUDIO IN
jacks on the TV.
_ Select the "AUX 1 VIDEO"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) (,'l'buttons.
Then press the MENU button.
<_ Press the MENU AY and
I ENU (M) buttons to highlight
and select (t,,") the AUX 1 VIDEO
mode.
_Turn the VCR ON and press
I PLAY to view the tape on the TV.0
NOTE: Connections and use of the
TV's rear AUX 2 VIDEO Input jacks
are the same as for the AUX ]jacks
(except "AUX 2" is selected as the
PICTURE AND SOUND FROM Picture Source in step 3).
PLAYBACK OF VCR TAPE
_BACK OF "IV
m F_TU_ MENU m
• ' I ' _ ' ANT A
Al>qT8 (_
I II ' /' I I
+- ++(YELLOW) (RED/WHITE)
AUDIO/VIDEO
OUTPUT JACKS ,,_._
ON VCR O
VCR
1f you have a single (monaural) I
Audio Oulput VCR. "Y" connectors
are available to complete your
connection. Contact your dealer, or
our Pa_s lnfocraation Cent_ ( 1-800-
851-8885) to order any optional
accessories.
Remember, after it is
connected an easy way to
select the AUX 1 VIDEO mode is
to press the TV/VCR button on
the remote. AUX 2 VIDEO; SIDE
VIDEO; AUX 1 Y PB PR; ANT
A/B, and the last channel viewed
can also be selected in this way.
Also, if you have added AUX l
VIDEO to the TV's channel
memory (see page 14), you can
just press the CHANNEL AY
buttons to select the AUX 1 mode.
33