Manual

By adding optional external
speakers to the TV s sound sys-
tem, you can create the feeling of
reflected sound that surrounds you
at a movie theater or concert hall.
<_ Connect external speak-
both
ers to the speaker wire terminals
on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(efl)
speaker terminals on the 'IV.
<_ Place the speakers so the view-
ing area is between the TV and the
rear surround speakers. (See over-
head view drawing.)
<_ Turn "IV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (u") position.
After setup whenever a stereo sig-
nal is received the audio will be
heard in Surround Sound.
O
REAR SURROUND SOUND
SPEAKER TERMINALS
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front "IV
speakers. It is intended for the rear speakers to give
a background noise effect which requires a lower
volume level than the TV's front _peakers,
BACK OF TV
Remember, !
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
_ Variable Audio
[ Surround control is
turned ON - see sec-
tion below).
"IV
REAR SPEAKER
_ PRIMARY VIEWING AREA
Tjhe TV's Variable Audio Output
acks can also be used for
Surround Sound. Once they are
connected an external hi-fi system
its speakers can be used for the
playback of Surround Sound.
Connect the R(ight) and L(eft)
ARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
_Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(u,") position. (Select the Main Menu
Sound option, screen 3 of 3).
O
BACK OF TV
AUDIO
INPUT JACKS
AUDIO SYSTEM SPEAKERS USED AS REAR
SURROUND SOUND SPEAKERS
27