Instruction manual

- - - ~-- ~NTER
~INGMODE
MEMORY
Press [ENTER] repeatedly to
select a category.
Use the TUNING Up and Down
[£.]/[T] buttons to select a chan-
nel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
Press the [TUNING MODE] button
repeatedly to select Channel
Search mode or Category Search
mode.
~TUNING"',
.... PRESET~
~ ._u.:7-
0
~~~~.~~~~.~? ~o o~olF1] ~:N
Selecting Channels on the AV receiver:
.;; .... : ;";
.....
Press the [RECEIVER] REMOTE
MODE button, and then press the
[ENTER] button repeatedly to
select Category Search mode.
Use the Left and Right [
..... ]/[~]
buttons to select a category, and
use the Up and Down
L.,]/[T]
buttons to select a channel in
that category.
Press the [RECEIVER] REMOTE
MODE button, followed by the
[D.TUN] button.
The [RECEIVER] button flashes.
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
For example, to select channel #20,
press
0,2,0, or 2,0, [ENTER].
Note:
While the [RECEIVER] button is flash-
ing, you cannot select another input
source with the remote controller.
1
~
... ~
2
• Category Search Mode
• Direct Tuning
You can select a SIRIUS Satellite Radio channel directly
by entering its number.
Notes:
• If you select an unavailable channel, "INVALID
CHANNEL" appears on the display.
•
If you select a channel that you are not subscribed to,
"CALL SIRIUS" appears on the display.
• Channels that are locked must be unlocked before you
can listen to them. See "Parental Lock" on page 6 for
more information.
4