Instruction manual

Notes:
• While a channel
is locked, it cannot be selected for
listening.
• To unlock a channel, you must enter the correct PIN
number and change it to Unlocked in step
6.
... SIRIUS ~
->
->
SAT RadloUode
Antenna Aiming
SIRIUS Parental Lock
7-3.Tuner
Use the Up and Down [.]/[T]
buttons to select "3. Tuner," and
then press [ENTER].
Note:The Tuner screen appears.
Enter Code
SIRIUS Parental Lock
Use the Up and Down [.]/[T]
buttons to select "SIRIUS Paren-
tal Lock," and then press
[ENTER].
The SIRIUS Parental Lock screen
appears.
Note:
If the SAT RadioMode is set to None
(see page 2), the "AntennaAiming" and
"SIRIUS Parental Lock" items are not
available.
3
®
t
$
4
®
t
••••. ~
Use the Up and Down [.]/[T]
buttons to select a channel, and
use the Left and Right
[~]/[~]
buttons to select Locked or
Unlocked.
The number, name, and status of the
currently selected channel
is displayed.
When you've finished, press
[ENTER] to save your changes,
or press [RETURN] to return to
the previous screen without sav-
ing.
When [ENTER] is pressed, the confir-
mation message "Locked" or
"Unlocked" appears.
Press the [SETUP] button.
Setup closes.
6
8
~
Or
Use the number buttons to enter
the old 4-digit PIN number.
->
->
EdltCode
Parental Lock
SIRIUS Parental Lock
Use the Left and Right [~]/[~]
buttons to select a numberon the
screen, and then press [ENTER].
Repeat this for each of the four
digits in the old PIN number.
If you enter the correctPIN number, the
following screen appears.
If you enter the wrong PIN number, the
message "Wrong
Code'" appears and
you'll have to enter the PIN again.
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Muillch
5.HDMI
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
, Use the Up and Down [.]/[T]
buttons to select "7. Hardware
Setup," and then press [ENTER].
The Hardware Setup menu appears.
Changing the PIN Number
--------------_._----
7