Instruction manual

_. ..
o --_.- -.---_--....(0 000
ENTER
SETUP
Positioning the SiriusConnect Home
Antenna
You can check the strength of the SIRIUS Satellite Radio
signal and adjust the position
of the SiriusConnect Home
antenna accordingly.
Use the Up and Down [.]/[T]
buttons to select "Antenna Aim-
ing," and then press [ENTER].
The Antenna Aiming screen appears.
Position the SiriusConnect
Home
antenna so that as many bars as
possible (up to 3) appear on
the
SIRIUS Satellite signal strength
meter.
Antenna Aiming
SIRIUS
Til Till
Satellite Terrestrial
SIRIUS 10 OOOOOOOOOOOO
Press the [RECEIVER] REMOTE
MODE button, followed by the
[TUNER] button, and [SETUP]
button.
The main menu appears onscreen.
Use the Up and Down
[A]/[T]
buttons to select "7. Hardware
Setup," and then press [ENTER].
The Hardware Setup menu appears.
7. Hardware Setup
j.R~Clln1rDI
2. Zone2
3. Tuner
4. Analog Multlch
5. HOMI
Use the Up and Down [.]/[T]
buttons to select "3. Tuner," and
then press [ENTER].
The Tuner screen appears.
... S1R1US~
->
->
Note:
If the SAT RadioMode is set to None
(see page 2), the "AntennaAiming" and
"SIRIUS Parental Lock" items are not
available.
If you cannot receive a satellite signal,
position the SiriusConnect Home
antenna so that
as many bars as possible
(up to 3) appear on the SIRIUS Terres-
trial signal strength meter.
Notes:
• So long as the signal strength
is good, you can enjoy
SIRIUS Satellite Radio by using either satellite or ter-
restrial reception.
• Terrestrial signals are only available in certain areas.
9