Instruction manual

For Customers Using an RIHD-compatibleTV,
Player, or Recorder
When the AV receiveris connected to an RIHD-compatible TV,
the following linked operations are possible:
• When the
TV is set to Standby, the AV receiver will also go
on Standby.
• Using the
TV's menus, you can select whether to use the
speakers connected to the
AV receiver or the TV's speakers.
• You can listen to
TV programs, or external sources con-
nected to the TV, through the speakers connected to the
AV
receiver. (An optical or other audio connection is required in
addition to an HDMI cable.)
• You can adjust the volumeand select input sources on the
AV
receiver with the TV's remote controller.
• You can adjust the volume and change channels on the
TV
with the AV receiver's remote controller.
When the
AV receiver is connected to an RIHD-compatible
player
or recorder, the following linked operations are possible:
Depends on a component, not all functions may work.
• When playback is started on the player
or recorder, the AV
receiver automatically selects the HDMI input to which the
player
or recorder is connected.
•
You can operate the player or recorder with the AV receiver's
remote controller.
• AV Receiver Setup
1. Connect the AV receiver to the TV, as explained in "Con-
necting a
TV or Projector" in the Instruction Manual, and
use audio connection
Ii (DIGITAL OPTICAL IN 1).
2. Assign the HDMI IN to which the
AV component is con-
nected to an input selector, as explained in
"HDMI Input
Setup" in the Instruction Manual.
3. Set the following settings to Enable, as explained in "Hard-
ware Setup," "HDMI" in the Instruction Manual.
• Control:
Enable
• Power Control: Enable
• TV Control: Enable
• TV, DVD Player, etc. Setup
The TV and DVD player must also be configured for linked
operation. Refer to the Instruction Manual for each component
and configure it accordingly.
• After Configuring Each Component
If you're using for the very first time, have changed the settings
of a component, have turned off a component, have unplugged
a component's power cord from the wall outlet,
or experienced
a power outage, linked operation may temporarily fail to work.
In this case, perform the following procedure:
1. Make sure each component is connected with an HDMI
cable.
2. Turn on all
of the components.
3. On the TV, select the AV input to which the AV receiver is
connected.
4. Turn off the TV, and then turn it back
on again.
5. Turn
off the AV receiver, and then turn it back on again.
6. On the AV receiver, press each input selector button in turn
and confirm that the picture from each
of the source com-
ponents connected to the
AV receiver appears on the TV.
SN 29355696
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
Notes
• Audio from DVD-Audio and SACD sources will not be out-
put through the
TV's speakers. If you set the DVD player's
audio output to 2-channel PCM, sound will be output by the
TV's speakers.
• When listening through only the
TV's speakers, if you oper-
ate the
AV receiver's volume control, or select another input
source, sound will beoutput by the speakers connected to the
AV receiver. To listen through only the TV's speakers again,
you'll need to perform the setup again on the
TV.
• If you connect an R I capable component, do not connect it
with an
R I cable.
•
When you use the AV receiver's TAPE, TUNER, or CD
input, sound can only be output by the speakers connected to
the
AV receiver.
• On the TV, when a input other than the HDMI input
that's
connected to the AV receiver is selected, the AV receiver will
switch to the
GAMErrV input.
• About RIHD-compatible Components
The TVs listed below are compatible with RIHD.
For model specifics and the latest information, see the
Onkyo/lntegra Web site.
• Panasonic
TVs that support VIERA LINK
• Sharp TVs (see the Onkyo/lntegra Web site for supporting
models)
• Toshiba
TVs that support CE-LINK
The players and recorders listed below are compatible with
RIHD.
• Onkyo and Integra players that support RIHD
• Panasonic players and recorders that support VIERA LINK
(only when used with a Panasonic
TV that supports VIERA
LINK)
• Sharp players and recorders (only when used with a Sharp
TV)
• Toshiba players and recorders that support
CE-LINK (only
when used with a Toshiba
TV that supports CE-LINK)
Components other than those listed here may also provide
linked operation
if they support the CEC part of the HDMI
standard, however, operation cannot be guaranteed.
10803-1
11111111111111111111111111111111111111111111111111
* 2 9 3 5 5 6 9 6 *