Manual

There two analog audio output jacks OUT L AUDIO R (audio signal output left/right) and two
audio input jacks IN L AUDIO R (audio input left/right) on the back of the DVD Recorder
These can be used to connect the following devices:
•) A receiver with Dolby Surround Pro Logic
•) A receiver with two-channel analog stereo
The rear of the DVD Recorder features a digital DIGITAL AUDIO OUT out jack for a coaxial
cable.
It can be used to connect the following devices:
•) an Audio/Video receiver or an Audio/Video amplifier with a digital multi-channel
sound decoder
•) a receiver with two-channel digital stereo (PCM)
I Digital multi-channel sound
Digital multi-channel sound provides maximum sound quality. You will
need a multi-channel A/V receiver or amplifier that supports at least one
of the audio formats of the DVD Recorder (MPEG2 and Dolby Digital).
Consult the instruction manual of your receiver to find out which audioformats it supports.
I xA loud distorted sound is coming from my speakers
¢_ Tile receiver does not support tile digital audio format of the DVD
recorder. The audio format of the inserted DVD is displayed in the
display panel when another language is switched on. Playback using
6-channel digital surround sound is only possible when the receiver Problem
has a digital multi-channel sound decoder,
20 Connecting additional devices