Manual

Confirm with OK.

xThe following message appears on the screen: 'Please enter

channel numbed

¢_ The channel number of the TV channel has not yet been assigned to

the PlusCode number. Ushlg • , _ or the number buttons 0..g on

the remote control, select the corresponding channel number (name)

of the TV channel and confirm with OK,

xThe following message appears on the screen: 'PlusCode

number wrong'

¢_ The entered PlusCode number is incorrect. Repeat your entry or

cancel using the SYSTEM-MENU button,

¢_ Check the time/date (see 'Setting the time & date' in 'lnstalIing your

DVD recorder').

x The following message appears on the screen: 'Date does not

match Mon-Fr_

¢_ A daily recording was entered for the wrong day, Daily programming

can only be used for recordings to be made from Monday to Friday,

Problem

The decoded data appears _fter confirmation. You can go back

and change the data Select the appropriate input field with • or

4 . Change the information with <I , • or the number buttons

0..9,

Change 'AM/PM'

Use the SELECT button to select 'AM or 'P/t_ in the input fields

'Star_ and 'End.

Changing the recording mode

Select 'RecMode' using • .

Using CH-V , select the recording mode 'M1, M2, M2x, M3, M4, M_.

If all information is correct, press the OK button The

information is stored in a TIMER block.

To end, press TIMER.

Insert a recordable disc in the Recorder.

The disc is checked.

Switch the Recorder off with STANDBY (_,

The programmed recording will only function properly when the

DVD Recorder has been switched off using the

Tip

Tfmer

VCR Plus+ system

Rec

Date Ch. Start End Mode

01/22 001 08:3rAM 10:00PM M1

To store

Press OK

If any of the TIMER blocks are in use, 'TIMER' will light up on the display

Programming a recording (TIMER) 61