Manual

PROBLEM SOLUTION
No playback on DVD
recorder:
•_There is no recording on the disc: Change disc.
_ou inserted the wrong disc type: Your Recorder can play the following disc types: DVD
Video, (Super)Video-CD, DVD+R(W), Audio-CD,, MP3-CDs
•/You inserted the disc the wrong way: Insert the disc with the label facing up.
/The disc is dirty. Clean the disc.
¢_!rong region code: The region code of the DVD and the DVD Recorder must match.
€The child lock is on. Read chapter 'Access Control (Child Lock)'
_ou have selected or set the wrong channel number on the TV for the DVD recorder: Select
the correct channel number on the TV (channel 3 or 4).
¢The cable connecting the TV and the DVD Recorder may be loose. Check the cable.
Poor playback on DVD
Recorder (distorted
_our TV is not properly adjusted,
€The disc is dirty: Clean the disc.
Programmed recording
does not work:
recorder.
_ou have set the wrong time or date: Check timeldate.
•/You have not set the TIMER properly: Check the programmed recordings (TIMER block).
•_A locked disc was inserted:Remove disc lock.
CA finalized DVD+R has been inserted. Change disc.
There is picture or sound
interference with the TV
reception.
•_During playback via the internal TV tuner (MONITOR button), switch to recording mod_
'M1' by pressing REC MODE. This will give you the best possible picture quality.
Before making the recording, select the recording mode as described in chapter 'Manual
recording', section 'Selectingthe recording mode (quality)'.
•_Change the modulator channel. During standby hold on the remote the button 3 pressed to
switch to channel 3. With button 4 you switch to channel 4.
€Have your antenna or cable TV signal checked
Before you call technical support 77