Manual

Connecting the DVD Recorder
(No Cable Box)
Power cord to the H
DVD Recorder's
MAINS jack and
to a power outlet
!1
MAINS
Antenna or CaNe TV signal
to the DVD Recorder s
ANTENNA jack
Audio and Video cables to the
DVD Recorder's red/white
AUDIO OUT 2 and
_)el!ow VIDEO (CVBS) ,
UT 2 acks and to the TV s
AUDQ NandVDEO Njac<s
,_ Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
Connect the supplied video cable (which has yellow markings) to the yellowVIDEO (CVBS) OUT 2 jack
of the DVD Recorder and to theVIDEO IN jack on your TV.
Connect the supplied audio cable(s) (redlwhite markings) to the red/white, right/left AUDIO OUT 2
jacks on the Recorder and to the TV's right/left AUDIO IN jacks. Match the cable colors to the jack colors.
Because you are not using a Cable Box, you should remove the Demo Pin from the G-LINK jack on the rear of
the DVD Recorder. Details are on page 7 of this Quick-Use Guide.
Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the DVD Recorder.
Connect the power cords of the Recorder and theTV to a power outlet.
The first time you connect the Recorder's power cord, available features will scroll across the display panel on the
front of the Recorder.This will stop when you turn on the Recorder's power.
Press STANDBY O to turn on the DVD Recorder. Turn on theTV and set it to the correct Audio/Video
In channel.
You should see the DVD Recorder's initial Setup menu on theTV the first time you turn on the
Recorder. Go to pages 4-5 of this Quick-Use Guide to set up the Recorder for the first time.