Manual

ManualsBrandsMagnavox ManualsVideo EquipmentOfficial Magnavox dvd player

100

Connecting the DVD Recorder with a Cable Box

Power cord to the

DVD Recorder%

MAINS jack and

to a power outlet

Audio and Video cables to the

DVD Recorder's red/white

AUDIO OUT 2 and

yellow VIDEO (CVBS) OUT 2

acks and to the TV s

AUDIO and V DEO IN iacks

RF coaxiai cable to the

OUT jack of the Cable Box

and "cothe DVD Recorder s

ANTENNA iack

To front of Cable Box

(not used with Satellite

I Connect the Cable TV signal to the IN jack on your Cable Box. The IN jack may be labelled differently. Seethe' Cable Box owner's manual for details.

Connect an RF coaxial cable to the OUT jack of the Cable Box and to the ANTENNA jack on the rear

of the DVD Recorder. The OUT jack may be labelled RF OUT, TO TV, or ANTENNA OUT. See the Cable Box

owner's manual for details.

Connect the supplied video cable (with yellow markings) to the yellowVIDEO (CVBS) OUT 2 jack of

the DVD Recorder and to theVIDEO IN jack on your TV.

Connect the supplied audio cable(s) (with red/white markings) to the red/white, right/left AUDIO OUT

2 jacks on the Recorder and to the TV's right/left AUDIO IN jacks. Match the cable colors to the jack colors.

You will need the G-Link cable in order to use the GUIDE Plus+ _ System. Connect the supplied G-Link cable to

the G-LINK jack on the rear of the DVD Recorder. (Remove the Demo Pin first if it is still attached to the G-

LINK jack.) Place the sensor of the G-Link cable in front of the Cable Box so it faces the remote sensor of your Cable

Box. The G-Link cable's sensor should be within one inch of the front of your Cable Box.

Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the DVD Recorder.

Connect the power cords of the DVD Recorder, Cable Box, and TV to a power outlet.

The first time you connect the DVD Recorder's power cord, the features of the Recorder will scroll across the display

panel on the front of the Recorder.This will stop when you turn on the DVD Recorder's power.

' Press STANDBY 0 to turn on the DVD Recorder. Set the DVD Recorder to channel 3 or 4 (the output

channel of your Cable Box).Turn on the TV and set it to the correct Audio/Video In channel.

You should see the Initial Setup menu on theTV screen the first time you turn on the DVD Recorder.

Go to pages 4-5 of this Quick-Use Guide to set up the DVD Recorder for the first time.