Manual

Setting Up the DVD Recorder
Initial Setup
Before you can use your new DVD Recorder, you must
complete the Initial Setup.
Press STANDBY O to turn on the Recorder. When you
turn on the Recorder for the first time, the first Initial Setup
menu (for Menu Language) will appear on the TV screen. "IS
TV ON? C03" will appear on the Recorder's display panel.
This reminds you to turn on theTV and set it to theVideo In
channel (Video In,Auxiliary, etc., depending on your hookup).
Menub=_Q_lag_
_r_ssDK _ocontJ_L_
Use the ACH+, VCH-, and OK buttons on the remote
to select items during Initial Setup. Follow the on-
screen instructions.
You will choose languages for different features, choose a TV
Shape, and set up TV channels. This will take a couple of min-
utes, but you must do it before you can use the Recorder.
You cannot turn off the Recorder or use any of the buttons
on the Recorder until you finish the Initial Setup.The only
way to quit is to disconnect the power cord.The Initial Setup
will appear again the next time you turn on the Recorder.The
menus will not go away until you finish the Initial Setup.
Press SYSTEM MENU to clear the screen when chan-
nels are set (when "Auto ch. search complete" appears).
In sta_latJ0n
Auto C_ Pro_rarqrq[n9
A_0_ _earchc0r_plete
024Channels o_nd
TO_xll _ress
sYsrEr_t_E_L_
O OOM°mT°_ Dir_ nE_tJn_ 6
0®0®
G_IDE V
(D (!) (!)
0 (i)
©®@
Setting Up the GUIDE Plus÷ ® System
When you finish the Initial Setup, GUIDE Plus+_ System
information will appear on the TV. Press OK to continue.
When "ldentifyingYour Location" appears, press
ACE+ or VCH- to highlight your country in yellow,
then press OK.
Next, press the Number buttons on the remote to
enter your postal zip code, then press OK.
The next message will ask whether you have Cable
TV service. Press ACE+ or VCH- to chooseYes or
No, then press OK. Choose Yes if you have a Cable TV
subscription. Choose No if you have only a regular antenna
connected to the DVD Recorder.
If you chose No, go to step |4.
If you choseYes, go to step 8.
The next message will ask if you connected a Cable
Box to the DVD Recorder. Press ACH+ or VCH- to
chooseYes or No, then press OK.
If you chose No, go to step 14.
If you choseYes, go to step 9.