Manual

I
Using your DVD-Recorder remote control I
with your TV set
I
With the enclosed multicode remote control you can control the main functions of your TV set.
To do this, you must first enter a code number that corresponds to the make of your TV set.
You will find a summary of all available remote control codes on the last page of this manual
Hold down the STANDBY O button.
Using the number buttons 0..9, enter the code number that
corresponds to the make (manufacturer) of your TV set.
When you have entered the code number check that, the TV set
will responds to the TV VOLUME-- or TV
VOLUME + buttons.
3
XMy TV set will not react
¢_ Also try to enter the other code numbers or that of other
manufacturers.
¢ In some cases, it is possible that your TV set will not react to the
selected code numbers. If this is the case, you unfortunately cannot
use this function.
x How can | reset the remote code?
¢_ Enter the code number 000
By using the TV buttons on the panel in the middle of the
control, you can:
TV VOLUME + increasethe TV volume
TV VOLUME -- decrease the TV volume
MUTE _ switch off sound
Hold down the button ,TV (left side of the remote) and select
the corresponding function using the following buttons
STANDBY
CHANNEL+
CHANNEL-
0..9
switch off the TV set
next channel number
previous channel number
Number buttons 9.0
Problem
User preferences 95