Manual

PROBLEM SOLUTION
No playback on DVD
recorder:
/There is no recording on the disc: Change disc.
_ou inserted the wrong disc type: Your Recorder can play the following disc types: DVD
Video, (Super)Video-CD, DVD+R(W), Audio-CD,, MP3-CDs
_ou inserted the disc the wrong way: Insert the disc with the label facing up.
/The disc is dirty. Clean the disc.
¢_!rong region code: The region code of the DVD and the DVD Recorder must match.
€The child lock is on. Read chapter 'Access Control (Child Lock)'
_ou have selected or set the wrong channel number on the TV for the DVD recorder: Select
the correct channel number on the TV (channel 3 or 4).
€The cable connecting the TV and the DVD Recorder may be loose. Check the cable.
Poor playback on DVD
Recorder (distorted
_our TV is not properly adjusted,
€The disc is dirty: Clean the disc.
Programmed recording
does not work:
recorder.
_ou have set the wrong time or date: Check time/date.
_ou have not set the TIMER properly: Check the programmed recordings (TIMER block).
_A locked disc was inserted:Remove disc lock.
CA finalized DVD+R has been inserted. Change disc.
There is picture or sound
interference with the TV
reception.
_Before recording, select the recording mode as described in chapter 'Manual Recording',
section 'Selecting the recording mode (quality)'
_Change the modulator channel. During standby hold on the remote the button 3 pressed to
switch to channel 3. With button 4 you switch to channel 4.
_Have your antenna or cable TV signal checked
102 Before you call technical support