Manual

Quick install guide
Connecting your DVD Recorder to the
TV/Initial installation
Warning ! Until the initial installation has been completed, the buttons on the front
will not function.
1
Remove the antenna cable jack from your TV. Insert it into the
ANTENNA IN jack at the back of the DVD recorder.
2
Insert one end of the supplied antenna cable into the TV
OUT jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV
ANTENNA
3
4
5
6
7
Connect the S-VIDEO OUT/AUDIO L/R OUTjacks or
VIDEO (CVBS) OUT / AUDIO L/R OUT with the
corresponding input jacksof the TV.
Switch on the TV
Connect the mains jack _MAINSat the back of the DVD
Recorder with the power supply using the supplied power cable.
The most important features of the DVD Recorder will appear
on the display. After the initial installation is completed, this
function will be switched off.
Press STANDBY-ON O on the recorder.
i C Tll r3_y31 ,
* :_ , _ L,_r wll appear on the display.
t _ Tit £3_L-3
i _{ J _ Ltt',l_
8
If necessary, select the channel number of the input jack at the
TV
The initial installation menu appears on the screen.
Select your preferred setting using • or • .
Confirm with OK.
The initial installation is carried out automatically Please wait until the procedure is completed.
Menu Langua£e
l English
Espafiol
Fran§ais
Press OKto continue
initialSetup