Manual

)y adding optional external
speakers to the TV's sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hcIll.
<_ Connect botla external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(i!ght) and L(eft)
speaker terminals on the TV.
<_ Place the speakers so the
viewing area is, between the TV
and the rear surround speakers.
(See overhead view drawing.)
<_ Turn TV ON and place
the
STEREO control to the "STEREO
IF AVAILABLE" (u,") position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
REAR SURROUND SOUND
SPEAKER TER MINALS
I
BACK OF 'IW
Remember,
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Stereo Surround
control is turned
ON - see page 22).
tZ'fie TV's Vc_riable Audio Output
J. jacks can also be used for
Surround Souad. Once they are
connected to on external hi-fi
system its speakers can be used for
the playback of Surround Sound.
_,_, Connect the and L(eft)
R(ight)
"VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
@> Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
._,creen control to the SURROUND
(_') position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
BACK OF TV
VARIABLE AUDIO
OUTPUT JACKS
AUDIO
INPUT lACKS
AUDIO SYSTEM SPEAKIZ_RS USED AS REAR
SURROUND SOUND SPEAKERS
24