Instruction manual

13
Getting to Know the AV Receiver—Continued
For detailed information, see the pages in parentheses.
I MASTER VOLUME control (47)
Sets the volume of the AV receiver to Min, 1
through 79, or Max.
J PHONES jack (49)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
K SPEAKER A B buttons
Turn speaker set A and B on or off.
L TONE, –, and + buttons (75)
Used to adjust the tone (bass and treble).
M MOVIE/TV button (67)
Selects the listening modes intended for use with
movies and TV.
N MUSIC button (67)
Selects the listening modes intended for use with
music.
O GAME button (67)
Selects the listening modes intended for use with
video games.
P DISPLAY button (49)
Displays various information about the currently
selected input source.
Q DIGITAL INPUT button (46)
Used to assign digital inputs to input selectors.
R DIMMER (RT/PTY/TP) button (64, 48)
Adjusts the display brightness.
On the European modes, this is the RT/PTY/TP but-
ton, and it’s used with RDS (Radio Data System).
See “Using RDS (European models only)” on
page 63.
S MEMORY button (54)
Used when storing or deleting radio presets.
T TUNING MODE button (52)
Selects the Auto or Manual tuning mode for AM
and FM radio.
U SETUP MIC (42)
The automatic speaker setup microphone connects
here.
V AUX INPUT (37, 73)
Used to connect a camcorder, game console, and so
on. There are input jacks for composite video and
analog audio.
For detailed information, see the pages in parentheses.
1 SLEEP indicator (48)
Lights up when the Sleep function has been set.
2 MUTING indicator (48)
Flashes while the AV receiver is muted.
3 Listening mode and format indicators (67)
Show the selected listening mode and audio input
signal format.
4 Tuning indicators (52)
FM STEREO (52): Lights up when tuned to a ste-
reo FM station.
RDS (63): Lights up when tuned to a radio station
that supports RDS (Radio Data System).
AUTO (52): Lights up when Auto Tuning mode is
selected for AM or FM radio. Goes off when Man-
ual Tuning mode is selected.
TUNED (52): Lights up when tuned to a radio sta-
tion.
5 Message area
Displays various information.
6 Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: PCM, MULTI CH, or HDMI.
7 Audyssey indicator (43)
Lights up during automatic speaker setup.
Display
1 23 4
57
6