Manual

O
CD
m
_:; == _; %:' ;; _ ,
Warnin_
I) This system is designed for conventional CDs. Do not useany accessories
such asdisc stabilizer rings or CD treatment sheets, etc., which may
damage the CD mechanism.
2) Do not load mare than one discinto each tray.
3) When the CD changer is loaded with CDs, do not turn over or shake the
system.This may jam the changer.
You may load three discs in the CD changer for continuous playback
without interruption.
Discs for playback
This system can play all digit_ audio CD,
finalized dig_l audio CD-Recordable
and finalized dig_l audio CD-
RewTitable format discs.
Loading the CD Changer
I Press CD to select CD mode
2 press OPEN'CLOSE
The CD carousel tray slides out_
3 Load a CD with the printed side up
in the right tray
You can load another disc in the left
tray
To load the third disc, press the
DISC CHANGE button.
The CD carousel tray will rotate
until the empty tray is ready for
loading.
4 Press OPEN,CLOSE to dose the
CD carousel tray
The total number of tracks and
the playing time of the selected
disc appear on the display
Note;
Toensuregoodsystemperformance,
wait unbl the CD changercomplete/),
readsthe disc(s)before proceeding.
CD Direct Play
You can play a CD directly by
pressing the DiSC 1, DISC 2 or
DISC 3 button The CD player will
stop at the end of playback of the
selected disc.
-- A ir_button indicates that a disc _s
loaded in the disc tray
-- A flashing button indicates that a
disc is playing
Playing a CD
| press to start playback
The disc tray track number and
elapsed playing time of the current
track appear on the display
To interrupt playback, press II
The playing time flashes.
To resume p{ayback, press again
2 To stop playback, press
NOt_
- All the available discs wfll pJoy once,
then stop.
Disc Change
You can change the outer two discs
while the third inner disc is stopped or
is playing
I press DISC CHANGE.
The CD carouse[ tray slides out
2 Replace the discs in _he left and right
disc trays.
3139 115 20211 (ENG)
!og01-28JC1 _lO/37-EnLC 14 _ 15/06/00, 02:16 PM