User guide

Troubleshooting 38
The configuration file is corrupted
· When this very unlikely event occurs, you have to revert to the original
configuration. All your customized commands devices and macros will be
lost and you will have to reprogram your Remote Control.
Remote Control error messages
· If one of the following error messages occurs, please contact your dealer or
the Philips customer service:
· CanÕt open configuration file
· Configuration file error
· No configuration file found
· Invalid configuration file version
Recharging Problems
The batteries wonÕt recharge
· Make sure you are using the rechargeable battery pack included with your
recharging dock and not the AA batteries.
The indicator light flashes
· Check if the contacts on the recharging dock are clean and free of
obstructions.
· Make sure the Remote Control lies properly on the dock.
· Make sure the battery pack is installed properly in your Remote Control (see
p. 4)