Computer Hardware User Manual

ManualsBrandsMagnavox ManualsComputer HardwareG43TWINS-FULLHD

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page 41.

2. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 36 for details.

3. This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 19 for proper installation.

4. Please check the table below for the CPU FSB frequency and its

corresponding memory support frequency.

CPU FSB Frequency Memory Support Frequency

1333 DDR2 667, DDR2 800, DDR2 1066,

DDR3 800, DDR3 1066

1066 DDR2 667, DDR2 800, DDR2 1066,

DDR3 800, DDR3 1066

800 DDR2 667, DDR2 800,

DDR3 800

* DDR2 1066 memory modules will operate in overclocking mode.

* If you adopt a DDR2 1066 memory module on this motherboard,

you need to adjust the jumpers. Please refer to page 24 for proper

jumper settings.

5. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

and Windows

Vista

. For Windows

XP 64-bit and Windows

Vista

64-bit with 64-bit CPU, there is no such limitation.

6. The maximum shared memory size is defined by the chipset vendor and

is subject to change. Please check Intel

website for the latest information.

7. This motherboard supports three VGA output options: D-Sub, DVI-D and

DisplayPort. D-Sub port is on the I/O panel. DVI-D and DisplayPort are

supported when you install the bundled ASRock DVI_DisplayPort Card on

PCIE2 (green) slot.

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

Windows

2000 / XP / XP 64-bit / Vista

Vista

64-bit compliant (see CAUTION 16)

Certifications - FCC, CE, WHQL

* For detailed product information, please visit our website: http://www.asrock.com