Manual

Connections
Step S: Connecting FM/AM
antennas
Step 6: Connecting the power
cord
After everything is connected properly, plug in the
AC power cord to the power outlet.
Never make or change any connectiorm with the power
switched on,
/
.j Connect the supplied AM loop antenna to the AM jack
Placethe AM loop antennaon a shelfor attach it to a
stand or wall
_2",_Connect the supplied FM antenna to the FMjack Extend
the FM antenna and fix its ends to the wall,
Notes:
Adjust the position of the antennas for optimal reception.
Position the antennas as far as possible from your TV,VCR
or other radiation sources to prevent unwanted interference.
IMPORTANT!
The type plate is located at the bottom of the
system.
The apparatus shall not be expose to dripping or
splashing and that no objects filled with liquid such
as vase shall be placed on the apparatus.
To avoid overheating of the system, a safety circuit
has been built in. Therefore, your system may
switch to Standby mode automatically under
extreme conditions. If this happens, let the
system cool down before reusing it.
CONNECTIONS 11