Manual

Setting the sound__Preparati°ns /
- TV System
Allows you to select the color system matching the
connected TV set
AUTO
If the connected TV is multi system, select this
mode The output format will be in accordance with the
NTSC
If the connectedTV isNTSC system,selectthis mode It
will changethe video signalof a PALdiscand output in
NTSC format
PAL
If the connectedTV is PALsystem,select this mode It
will changethe video signalof a NTSC discand output in
PALformat
- Video Out
Video out selection enables you to choose the type of
video output suitable for your DVD system
PR PBY / SCART(SCART only for Europe version)
SelectPR PBY/5CART if you haveconnected the
video output to yourTV usingPR PBY/SCARTjack
S-VIDEO
SelectS-VIDEO if you haveconnected the S VIDEO
output to yourTV usingS VIDEOjack
Note:
Youdo not need to adjust the video output setting if you
are usingVIDEOjack (yellow) to connect the DVD system to
your T_L
- Screen Saver
If set to ON, when you leave the system in stop or pause
mode for more than five minutes, the screen saver will be
activated The default setting is ON
- Digital Output
Digital output selection enables you to specify the type of
digital output suitable for your amplifier or receives
• Select ALL if you have connected the digital output
(COAXIAL or OPTICAL) to a multichannel decoder
receiver
• Select PCM 96K if the external components is capable of
processing digital signal input with sampling rates of 96 kHz
• Select PCM 48K if the external components is incapable
of processing 96 kHz digital signal input, then convert to
standard signal with sampling rates of 48 kHz
• Select OFF to deactivate the digital output (COAXIAL or
- Night mode
Set night mode to on to level out the volume For
example, the disc will play at the same sound level
throughout the movie The default setting is OFF
Night function can also be accessed via the
remote control.
OFF
Select this when you want to er_oy the surround sound
with its full dynamic range
On
Select this to level out the volume High volume outputs
will be softened and low volume outputs are brought
upward to audible level This feature is only available for
movies with Dolby Digital mode
- Center Delay
If the listening position is closer to the center speaker than
the front speakers, you can set the center delay time to
improve the surround sound effect
Options : 5ms, 3ms, 2ms, 1ms or OFF
- Rear Delay
If the listening position is closer to the rear surround
speakers than the front speakers, you can set the rear delay
time to improve the surround sound effect
Options : 15ms, 12ms, 9ms, 6ms, 3ms or OFF,
- TestTone (DISC mode only)
If set to ON, the system will test the speakersettings The
test signal is generated through the left, center, right, and
rear (surround) speakersThe default setting isOFF
PREPARATIONS 19