Manual

1
2
3
4
Tuning to radio stations
Press STANDBY ON to switch on the last selected
source
Other Functions
Press SOURCE (or press TUNER) to select TUNER
mode
PressTUNER again to select the desired band : FM or
AM
Press and hold 1_141 or I_1_1 until the frequency indication
starts to change, then release
-_ The system automatically tunes to the next strong radio
station
,'--I'I ,r,-, rr,
_UZZI .ZZtU
• To tune to a weak station, press I_1<1 or I_1_1 briefly and
repeatedly until an optimal reception found
5 Repeat step 4 if necessary until you find the desired radio
station
1
2
Presetting radio stations
You can preset up to 40 stations regardless of the
Tune to your desired radio station (refer to "Tuning to radio
PressPROGRAM
-I. "PROGRAM" appears
nnn in_ rn _1
FUU _UZ3,ZZtU
PROGRAM
3 Use the numeric keypad (0-9) to select the desired
rlrl i irl-i rrl _u_ _:_
i--u _ _u zzI. zziu
PROGRAM
4
Note:
- If "PROGRAM"icon goes off before you select the desired
preset number, press PROGRAM again.
Press PROGRAM again to store the radio station
4 "PROGRAM" icon stops flashing
Repeat steps 1-4 to store other radio stations
Noteai:
- The old stored content in the selected address will be
covered when you operates the unit as above.
- During programming, if no key is pressed within five
seconds, the system will exit the program mode automatically.
Listening to preset radio
stations
In tuner mode, press • or • or use the numeric keypad
(0-9) to select the desired preset numben
4 The preset number, radio frequency and waveband are
displayed
Sleep timer setting
The sleep 8mer enables the system to switdl to standby
1
Press SLEEP repeatedly to select a preset time
4 The selections are as follows (time in minutes):
2
When you reach the desired length of time, stop pressing
the SLEEP button
4 "SLEEP" icon appears
To check the remaining length of time after sleep
timer is activated
Press SLEEP once
To change the preset sleep timer
Press SLEEP again while the remaining sleep dmer is
shown
4 The display will show the next sleep dmer options
To deactivate the sleep timer
Press SLEEP repeatedly until "1},{F" is displayed, or press
the STANDBY ON button
/
OTHER FUNCTIONS 27