Read your User Manual first for quick tips that make using your Magnavox product more enjoyable. If you have read your instructions and still need assistance you may access our online help at www.magnavox.com or call 1-800-705-2000 while with your product.
Once your MAGNAVOX pumhase is registered, you're eligible to receive all the privileges of owning a MAGNAVOX product. So corrlplete and return the WarranL7 Registration Card enclosed with your pur: chase at once.And take advantage of these important benefits. Congratulations on your purchase, and welcome to the "family!" Dear MAGNAVOX product owner: Thank you for your confidence in MAGNAVOX.You've selected one of the bestbuilt, best-backed products available today.
IMPORTANT SAFETY Read before INSTRUCTIONS operating Readtheseinstructions. 17. Keep theseinstructions. 3. 4. Heodallwarnings. Follow allinstructions. 5. Donotusethisapparatus nearwater. 6. 7. Clean onlywitha dry cloth. DonotblockanyofthevendlaUon openings. Installinaccordance withthe manufacturers instructions. Donotinstall nearanyheatsources suchas radiators, heatregisters, 18. stove,orotherapparatus (including amplifiers) thatproduce heat.
Panel Sequence COVER and Panel Side Index MODEL SAFETY REGISTRATION INFORHATION INFO _ PANEL PANEL Jm _ I PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL 11 12 13 14 9 10 PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL PANEL 27 28 29 30 31 32 Side 2 I Subject Alternate Antenna Panel Channel .................. Basic Connection No. 26 Subject Picture Menu Controls Panel ......
combination antenna receives normal broadcast channels (VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75() (ohm) antenna plug on the back of your TV and that's where the antenna goes. If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. Go to step 2. If your antenna has fiat twinlead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter TV).
f you cable signal uses a cable box or decoder, follow the easy steps below to complete the connection. Cable Signal IN from the Cable Company Cable Box (w/RF In/Outputs): This connection will be mono, Connect the Cable Company supplied cable to the signal IN(put) plug on the back of the Cable Box. cable, Using aconnect separateone round endcoaxial to the OUT(put) (TO TV) plug on the back of the Cable Box. round cable end to the Connectcoaxial the other of 75_ the input on the back of the television.
udio and Video Front Inputs are available for a quick connection of'a VCR, Mono Devices iii ? ? ziii?iiiilziiiiiii ¸¸¸¸o¸ ' i i i iiiii i + _!il to playback video from a camera, or attach a gaming device. Use the AV button on the remote control to tune these iil i ill i i__ +! i inputs. Connect the video (yellow) cable from the Video output on the Camera (or accessory device) to the Video (yellow) Input located on the FRONT of the TV.
Press POWER TV. to turn on the the Press sound VOLUME level. Press + toVOLUME increase - to lower the sound level. Press both buttons at the same time to display the TV's on-screen menu. Once in the menu, use these buttons to make menu adjustments Non-Stereo or selections. models AUDIO Press TV select CHANNEL channels. • or • (white Connect an acces- IN jack) Remote Sensors sory device to the AUDIO/VIDEO IN to (point remote jad
NUHBER Buttons Press the Number buttons to select TV channels or to enter values in the menu. For single-digit channels, press the Number button for the channel you want. TheTV will pause briefly before going to the chosen channel. A/CH Button (Alternate Channel) Press to switch between the last channel and the present channel. Details are on panel 26. 1 2 3 POWER 4 5 6 CH+ 7 8 9 A/CH 0 CC ,©©©© 000 VOL+ STATUS STATUS/EXIT Button Press to see the current channel number.
POWER button Press to turn the TV on or off. CH(annel) +/- Buttons Press to scan memorized channels. 7 (DO O0 A/CH STATUS 8 9 VOL(ume) +/- Buttons Press to increase or decrease the 0 CC VOL+ sound. MENU Button Press to see the menu. Press repeatedly to return to previous menus or remove the menus. _1 I_ • • Buttons Press to select or adjust the menu. items in MUTE Button Press to eliminate sound. when MUTE the SMART or restore will appear sound the TV on theTV is muted.
or our Spanish speaking TV owners n on-screen LANGUAGE option is present. With the LANGUAGE control you can set the TV's on-screen menu to be shown in either English or Spanish. Press the MENU button on the remote to show the on- ......... % :iiiii,!i i o Sound Tuner ¢ Fea_Jre® Mode Auto pr¢,gr_ Cha_ nel Edit screen menu. I - I Press or DOWN the CURSOR • buttons UPto • 2 scroll through the on-screen menu until the word INSTALL is highlighted.
heTUNER MODE control allows you o change the TV's signal input to either ANTENNA, CABLE,or AUTO mode. It's important for the TV to know what type of signal that is connected. (From a Cable TV signal or a normal Antenna signal.) In the AUTO mode, when the AUTO PROGRAM feature is activated, the TV will automatically choose the correct mode.
Ur TV can automatically set itself r local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+) or (-) buttons are pressed, Note: Make sure the antenna or cable signal connection has been completed before AUTO PROGRAM is activated. Press the MENU button on the remote to show the on-screen menu. [ Features P_ure Fnstai_ Sharpness ;- u.....
annel Edit makes it easy for you to ADD r DELETE channels from the list of channels stared in the TV's memory, Press the MENU button on the remote to show the on-screenmenu. DOWN buttons toUPscroll Press the • CURSOR • or through the on-screen menu until the wordlNSTALL is highlighted. button the Press to display CURSOR the INSTALL RIGHT I_ menu features. DOWN buttons toUPscroll the Press the • CURSOR • or Install features until the words CHANNEL EDIT are highlighted.
I_ _i II: [o_'A'll l[oX|J_1 roll | -"I_I _4[q isJ tl mlr+.._)] ts J_l | +I_ +i iL_o] o adjust your TV picture controls, select a hannel and use the Picture Menu Controls listed below: Picture v" Briqhtness o Color Brightness: Press the CURSOR RIGHT I_ or LEFT 4 buttons until the darkest parts of the picture are as bright as you prefer. • .( +i i t{o] I_I _ 50 ). 1 o Picture o Sharpness o Tint RIGHT Press Color: I_ orthe LEFT CURSOR _1 buttons to add or eliminate color. <>Color Temp.
ogadjust your TV sound, select and use the ound Menu Controls listed below. Treble Boost: Press the • or • buttons to turn the control On or Off, When On, the control will enhance the high frequency Sound Treb e Boost <>Bass Boost sounds, On e Balance o AVL buttons Bass Boost: to turn Press the control the • On or or • Sound Off. When On, the control will enhance the low frequency A sounds. Balance: Press the • or • buttons to adjust the [eve[ of sound coming from the left and right speakers.
any times while watching movies from a DVD player the image is shown in "letter box" format. This is the format that is shown in movie theaters, When shown on a TV screen, the image will have areas of black on top and bottom of the screen, Press the MENU button on the remote menu. to display the on-screen Press the button until CURSOR the word DOWN FEATURES I • ] [ F÷atu[÷8 o Sh&lrtL_k is highlighted.
_ _ _ i_eJ _i i] _ _&_l_±I _i i] 1_[_111 =1=11__ f±1_ti _eI_ he SmartLock TM feature is an integrated ciruit that receives and processes data sent by broadcasters, or other program providers, that contain program content advisories. When programmed by the viewer, a TV with SmartLock TM can respond to the content advisories and block program content that may be found objectionable (such as offensive language, violence, sexual situations, etc.).
ver the next few panels you'll learn how to block channels and get a better understanding of the rating terms for certain programming. IMa_n I o piclure IFoo_ SmauLock Ill • I _ o lasSA_ First, let's start by learning how to set a personal access code: [ Sound Fomlat ]l_c_ i_ Fomlat I Press the MENU button on the remote to show the on-screen menu. i?g2_°;°°_!l ......
fter your personal access code has been set (see previous page), you are now ready to select the channels or the A/V Inputs you want to block out or censor. Once you've entered your access code and the SmartLock TM features are displayed on the screen: Press the CURSOR UP Aor DOWN • buttons until the words BLOCK CHANNELS are I I SmartLock v BlockChannel Off Code e ClearAll o BlockAll e Setup e MovieRating o TV Rating [ highlighted.
fter blocking specific channels there may come a time when you want to block or clear all the channels at the same time. ISmartLock o Setup Once you've entered your access code and the SmartLock TM features are displayed on the screen: I • _,Block Channel Code [ v Clear A[[ o Block All o Movie o TV Clear ? Rating Rating [ Press the CURSOR DOWN • buttons either UP Aor to select CLEAR ALL or BLOCK ALL. If CLEAR ALL is selected, press the CURSOR RIGHT I_ button to clear all blocked channels.
J_l BE ;_ [eIa_ [41_ [cl _ _[eI_ __'_ _ _1 :y_,_-_ :_,xo__n _ [e_'A he SmartLock TM feature can block proramming based on the Movie Industry ratings, Once you've entered your access code and the SmartLock TM features are displayed on the [ SmartLock • o BlockChannel G o Setup Code PG ClearAll PG-13 o BlockAll R screen_ Press the CURSOR UP • or DOWN • buttons to highlight the words MOVIE RATING. Press the CURSORthe MOVIE RIGHT RATI_ button to display ING options (G, PG, PG-13, R, NCI 7, or X).
he SmartLock TM feature can block proramming based on the TV Industry ratings, Once you've entered your access code and the SmartLock TM features are displayed on the screen: Press the CURSOR UP • DOWN • buttons words TV RATING. to highlightthe or TV Rating ,zTV-Y o TV-Y7 o TV-G o TV-PG <>TV-14 o TV-MA I " Off¸¸¸ t ........
martLock TM offers the viewer other blocking features as well. With these Blocking Options, the censoring can be turned ON or OFF. I SmartLock o Setup Code <>Clear All Once you've entered your access code and the SmartLock TM features are displayed on the screen: * I o BlockAII <>Movie Rating Press the CURSOR DOWN • buttons words BLOCKING UP • or until the OPTIONS o TV Rating ,_Block Options • are highlighted.
lrOSedCaptioning (Co allows you to ead the voice content of television programs on the TV screen. Designed to help the hearing impaired, this feature uses onscreen "text boxes" to show dialogue and conversations while the TV program is in progress. Press the CC button on the remote to display the current Caption setting. Closed Press to choose the from CC button the four repeatedly Closed Caption options (CC Off, CCI, CC2, or CC Mute).
our TV can be set to automatically turn tself off at a given amount of time. Press the SLEEP remote timer button on the control and the SLEEP display will appear on the screen. Press button repeatedly to the pick SLEEP the amount of time (15, 30, 45, 60, 90, 120, 180, or 240 minutes) before the TV will turn itself off. NOTE: appear An on-screen during TV shuts count the last minute itself off.
ether you're watching a movie or a orting event, your TV has automatic video control settings matched for your current program source or content. Press the SMART PICTURE button on the remote control The current Smart Picture setting will be displayed on the screen, Press SMART PICTURE button therepeatedly to select either PERSONAL, MOVIES, SPORTS, WEAK SIGNAL, or MULTIMEDIA picture NOTE: Picture C) C)O settings. The way you choose Menu Controls PERSONAL setting. I Movies ] I...................
he Smart Sound feature allows the lisener to select between four different factory set sound options. Press the SMART SOUND but- ton on the remote control. The current Smart Sound setting will appear in the middle of the screen. iii!i!i!i!i!i!i_ ..... _'_!iiiiiiiiiii!!ii!ii!ii!ii!ii!ii!ii!ii!ii!il Press the SMARTto toggle SOUNDbetween button repeatedly the four" settings.
martSurf lets you set up to eight chan- can use the SURF button on the remote control to switch between different TV programs that currently interest you. Press CH +/- or the Number tobUtt°nSthe SURFt° se,ect acbanne,,,st ............ toadd .... number appears. Press SURF while the channel _ Press 41 to list add or thedelete channel to I_ theor SURF o ,or ou i........ are adding or deleting the channel. Repeat steps 1 through 3 to add additional channels (up to eight) to the SURFthelist.list.
ocurremote control has an Alternate hannel button that allows you to toggle between the current and previous channel. For instance, if you are watching two games on TV, you can enter the channel numbers once and flip between the two channels with the touch of only one button. After entering the two channels numbers, so that one is the last viewed channel and the other is the current channel, follow the step below.
No Power Remote • Check the TV power cord Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. • Check that the outlet is not on a wall switch. • Be sure the fuse is not blown on the AC • Check the batteries. If necessary, replace them with 2 AA Heavy Duty (Zinc Chloride) or Alkaline batteries. • Clean the remote control and the remote control sensor window on the TV. power strip, if one is being used No Picture • Check antenna connections.
WARNING Concerning Stationary Images on the TV Screen: PLACEMENT OF THE TV • Do not leave stationary or letterbox images on screen for extended periods of time. This can cause uneven picture-tube Normal aging. use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen.
AutoProgramming • The procedure of adding or deleting channel numbers into the Television's memory circuits. In this format the Television "remembers" only the locally available or desired channel numbers and skips over any unwanted channel numbers. Coaxial Cable • A single solid antenna wire normally matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input found on the Television or VCR.
Ninety (90) Days Labor & One (I) MAGNAVOX warrants this product against defect in material or workmanship, subiect to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive warranted repair on the product A sales receipt or other document showing the product and the date that you purchased the product as well as the authorized retailer included, is considered such proof COVERAGE: llf thisproduct is determined to be defective) LABOR: For a period of n
