Owner`s manual

@ Multi-information display
Shows the name of the current sound field program and
other information when adjusting or changing settings.
@ SLEEP indicator
Lights up while the sleep timer is on (see page 41).
@ 96124 indicator
Lights up when a DTS 9(,/24 signal is input to this unit.
@ Input channel and speaker indicators
LFE indicator
,_,a_,_w,2Z,= Presence speaker indicators
['-L] [C---_[Nllnput ch mnel indic tlors
_ _= Stur( und back st eaker indical( rs
LFE indicator
Lights up when the input signal contains the LFE
signal.
Input channel indicators
Indicate tile channel componeuts of tile current digital
input signal.
Presence and surround back speaker
indicators
Light up according to the number of presence and
surround back speakers set for "EXTRA SP ASSIGN"
(see page 72) and "SUR.B L/R SP" (see page 73) in
"SOUND MENU" when this unit is in the auto setup
(see page 28) or the speaker level setting in "SOUND
MENU" (see page 74) procedure.
_%,._
• You can make settings for surround back speakers autonlatically
by running "AUTO SETUP" (see page 28) or manually by
at{jnsting settings for "SUR.B L/R SP" (see page 73) in
"SOUND MENU".
• To use the presence speakers, set "EXTRA SP ASSIGN" to
"PRESENCE" (see pages 29 or 72).
.qftf[ff1¢|'tf_-
The remote control transmits a directional infrared ray.
Be sure to ailn the remote control directly at the remote
control sensor on this unit during operation.
Remote control sensor
I
0000
/
Approximately 6 m (20 ft)
€
Infrared window (@)
Outputs infrared control signals. Aim this window at tile
component you want to operate.
@TRANSMIT indicator
Flashes "a.llile tile remote control is sending infrared
signals.
Operation mode selector (@)
The fuuction of some buttons depends on tile operation
mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates tile component selected with an input
selector button (see page 87).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 86).
• Do not spill water or other liquids on the remote control
• Do not drop the remote controh
• Do not leave or store the remote control in the lbllowing types
of conditions:
places of high humidity, such as near a bath
places of high temperatures, such as near a heater or stove
places of extremely low temperatures
dusty places
• To set the remote control codes for other components, see
page 88.
I
27 En