Owner`s manual

i::i C,_"ii"li','i ,::7 T "::__:::'
_ii_iii_ iiii_i_i_'_i i_i _iii_ T "_ i_7
[ Ti.jg' Hi:::":::;'::_
'::_..i Ti.ji:::'i...[V'::_':::;
Room size. Presence. surround, and surround back room size. A@lsts the apparent size of the
surround sound field. The larger the value, the larger the surround sound field becomes. As the
sound is repeatedly reflected around a room. the larger the hall is. the longer the time between
the original reflected sound and the subsequent reflections. By controlling the time between the
reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter
from one to two doubles the apparent length of the room.
-"4;'-
When you atliust the room size parameters, we also recommend that you adjust the
corresponding initial delay parameters likewise. This a@lstment is especkllly effective lot the
CINEMA DSP programs.
Control range: 0.1 to 2.0
Source SOLIIId
I i....................Early i l
Trine Time Tilne
Sound source
Small value =/).l Large value = 2.0
Livmmss. Surround and surround back sound field liveness. Attjusts the reflectivity of the virtual
walls in the hall by changing the rate at which the early reflections decay. The early reflections of
a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one
which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to
as "dead". while a room with highly reflective surlaces is referred to as "live". This parameter
lets you a({iust the early rcflectiun decay rate and thus the "liveness" of the room.
Contrul range: 0 to 10
_ ead
Time
[ Small reflected
I SOLII/d
Small value = 0
Source sound
Time Time
[ Large refll:ctcd [
[ ou, d [
Large value = lfl
64 En