Owner`s manual

Use this lbature to activate the desired decoder manually when
this unit caunot detect the signal flag encoded to the input sources
correctly.
• The available decoders wtry depending on the setting of the
speakers and the input sources.
• 6.117. l-channel playback is not possible in the following cases:
when "SUR. L/R SP" (see page 73) or "SUR.B L/R SP" (see
page 73) is set to "NONE".
when the component connected to the MULTI CH INPUT
jacks is being played.
when the source being played does ]lot contain surround left
and right channel signals.
when a Dolby Digital KARAOKE source is being played.
when this unit is in the stereo playback, Compressed Music
Enhancer (see page 46) or Pure Direct (see page 48) mode.
whet] "BI-AMP" is set to "ON" (see page 96).
• When this unit is turned off. this setting will be reset to
"AUTO".
Use this menu to reassign the input/output jacks, select the
input mode or rename the input source.
HgHl_lgL_ 5ETUI_
2 iHPUT HEHU
÷ IZl)i Cl @._qSIGJ]HEJ/T
E IHF'.T F:EHgHE
C, U]L _['IE TR I H
D :,DECO[:,EIR HC,E:,E
-n, T SETL ,l_l ,I CH
[ &] ['_'] _Ul= '[)C,I,II-I
[ EI'4TE F:] _End: e_....
• Input/output assignment
l::i)i ..'0 ASSi GNHEN7
Use this feature to assign the il:lput/output .jacks according
to the component to be used if the initial settings of this
unit do not correspond to your needs. Change the
following parameters to reassign the respective jacks and
effectively connect more components.
Once the input/output jacks are reassigned, you can select
the corresponding component by using the INPUT
selector on the front panel (or the input selector buttons on
the remote control).
_%,._
The input source name in parentheses indicates the default
assigned input source.
For COMPONENT VIDEO jacks A, B and C
CHF'N"Fi...i i i"4i:::'UT
Choices: IAI DVD,DTV/CBL, V-AUX, DVR, VCR
[B] DVD, DTWCBL V-AUX, DVR, VCR
[C] DVD, DTV/CBL, V-AUX, DVR, VCR
I H:'tlT MENU
CMP[IT'-U IHPUT
+ Dq] ..... Dub
( ,bud )
[ E:] ..... DTU 'CBL
([,TUiC:BL)
[C] ..... DUIR
( [>UR )
78 En