Owner's Manual

LOCATION OF CONTROLS (HEADPHONE)
LOCATION OF CONTROLS (EARPHONE)
1. Button
2. Button
3. Button
4. Microphone
5. Indicators
6. AUX IN Jack
7. Micro USB Port (For Charging only)
1
1 4 2 4 3
5
6
2
3
4
5
6
7
POWER SOURCE OPERATION (HEADPHONE)
AUX IN:
The unit has a built-in Li-ion rechargeable battery, charge it before first
time use or when it is drained as follows:
1. Connect the small plug from the supplied USB Connection Cable to
the Micro USB Port on the unit.
2. Connect the full size USB Plug from the supplied USB Connection
Cable to the USB Port on the Personal Computer or USB Charger
(Computer and USB Charger not included).
3. When charging, the Red Charging Indicator on the unit will
illuminate. When charging is complete, it will turn off.
NOTES:
Your battery will last longer if you following these simple guidelines for
caring and storing.
A. Before first time use, recharge the unit approximately 4 hours until the
unit is fully charged.
B. Charge and store the unit within the temperature range of 5°C - 35°C
(40°F - 95°F).
C. Do not overcharge (longer than 24 hours). Excessive charging or
running the unit completely flat will damage battery. Battery
life will be extended if you keep the battery fully charged.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user
replaceable.
The unit has a built-in Li-ion rechargeable battery, charge it before first
time use or when it is drained as follows:
1. Connect the small plug from the supplied USB Connection Cable to
the Micro USB Port on the unit.
2. Connect the full size USB Plug from the supplied USB Connection
Cable to the USB Port on the Personal Computer or USB Charger
(Computer and USB Charger not included).
3. When charging, the Red Charging Indicator on the unit will
illuminate. When charging is complete, it will turn off.
NOTES:
Your battery will last longer if you following these simple guidelines for
caring and storing.
A. Before first time use, recharge the unit approximately 4 hours until the
unit is fully charged.
B. Charge and store the unit within the temperature range of 5°C - 35°C
(40°F - 95°F).
C. Do not overcharge (longer than 24 hours). Excessive charging or
running the unit completely flat will damage battery. Battery
life will be extended if you keep the battery fully charged.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user
replaceable.
POWER SOURCE (EARPHONE)
BT (BLUETOOTH) PAIRING:
For frist time use or re-pairing the unit to a new BT Device, pair as
follows:
1. Press and hold the Button on the unit approximately 2 seconds to
power on the unit. The Red & Blue indicators will illuminate and blink.
2. Power on the external BT Device and enter to BT searching mode.
Start pairing following the on screen instructions from the external BT
Device. When paired, the Blue lndicator will stop blinking and Red
lndicator will turn off.
3. If pairing is complete you may now play music or answer the phone
with your external BT Device.
4. During playback:
5. If the unit is paired to a Cell Phone:
• When a call is incoming during an active music session:
Press the Button then speak to the Microphone to answer the
call. When your call is complete, press the Button to
disconnect or end the phone call and resume to music playback.
Or, press and hold the Button approximately 1 second to
decline the incoming phone call then resume to music playback.
• Quick press the Button twice to redial the last telephone
number your cell phone called.
• Press the Button to pause; press again to resume normal
playback.
• Press and release the or buttons to adjust volume level as
desired.
• Press and hold the or buttons repeatedly to skip tracks.
Notes:
• When the external BT Device searches for the unit, our model number
“MBH571H” will appear on the display of external BT Device.
• If while pairing you are asked for a code please try “0000” or “1234”.
Normal operation after paired:
1. Power on the external BT Device and enter to BT playback mode.
2. Press and hold the Button on the unit to power on the unit. The
Red & Blue lndicators will illuminate and blink.
3. Wait a few seconds until the unit automatically pairs to the external BT
Device. (The Blue lndicator will stop blinking and Red lndicator will turn
off).
4. If pairing is complete you may mow play music or answer the phone
with your external BT Device.
SPECIFICATIONS (HEADPHONE):
PACKAGE INCLUDES:
1 x Owner’s Manual
1 x USB Connection Cable (For Charging Only)
1 x Audio connection Cable with 3.5mm Stereo Plugs
SPECIFICATIONS AND ACCESSORIES ARE SUBECT TO
CHANGE WITHOUT NOTICE
SPECIFICATIONS (EARPHONE): TROUBLESHOOTING
Check the following before requesting service:
PACKAGE INCLUDES:
1 x Owner’s Manual
1 x USB Connection Cable (For Charging Only)
SPECIFICATIONS AND ACCESSORIES ARE SUBECT TO
CHANGE WITHOUT NOTICE
Power Source: ....Built-in DC 3.7V; 55mAH (0.2035WH) rechargeable
Impedance of the Earbuds: ............................32 ohm, 5 mW per Channel
Audio power: .........................................5 mW per Channel (Total 10mW)
BT Version: .........................................................................................4.2
BT Operation Distance: ...................................Up to 32 Feet in open area
Power Source: ....Built-in DC 3.7V; 200mAH (0.74WH) rechargeable
Impedance of the Earbuds: ..........................32 ohm, 15 mW per Channel
Audio power: .........................................15mW per Channel (Total 30mW)
BT Version: .........................................................................................4.2
BT Operation Distance: ...................................Up to 32 Feet in open area
1. Button
2. Button
3. Button
4. Indictors
5. Micro USB Port (For Charging only)
6. Microphone
Can’t power
on
No sound
or sound
weak
Sound
distortion
BT not
Functioning
Built-in battery
drained
Volume of the unit was
set to minimum position
Volume level of paired
BT device is in low level
Volume level too high
Volume level of the paired
BT device too high
The external BT device
had NOT paired to the
unit
The external BT device
too far from the unit
Recharge the battery
Increase the volume level of
the unit
Rise the volume level of the
paired BT device
Reduce the volume level of
the unit
Reduce the volume level of
the paired BT device
Pair the external BT device
Place the external BT device
close to the unit
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
2 3 4 5
76
8 9 10 12 13
IM Size 67 x 96mm, Open size: 402 x 192mm
OPERATION (EARPHONE)
BT (BLUETOOTH) PAIRING:
For frist time use or re-pairing the unit to a new BT Device, pair as
follows:
1. Press and hold the Button on the unit approximately 2 seconds to
power on the unit. The Red & Blue indicators will illuminate and blink.
2. Power on the external BT Device and enter to BT searching mode.
Start pairing following the on screen instructions from the external BT
Device. When paired, the Blue lndicator will stop blinking and Red
lndicator will turn off.
3. If pairing is complete you may now play music or answer the phone
with your external BT Device.
4. During playback:
• Press the Button to pause; press again to resume normal
playback.
• Press and release the or buttons to adjust volume level as
desired.
• Press and hold the or buttons repeatedly to skip tracks.
6. To shut off the unit, press and hold the Button on the unit until
Notes:
• When the external BT Device searches for the unit, our model number
“MBH571E” will appear on the display of external BT Device.
• If while pairing you are asked for a code please try “0000” or “1234”.
Normal operation after paired:
1. Power on the external BT Device and enter to BT playback mode.
2. Press and hold the Button on the unit to power on the unit. The
Red & Blue lndicators will illuminate and blink.
3. Wait a few seconds until the unit automatically pairs to the external BT
Device. (The Blue lndicator will stop blinking and Red lndicator will turn
off).
4. If pairing is complete you may mow play music or answer the phone
with your external BT Device.
11
Listen from an external Audio Player such as MP3 Player,
Discman…etc. as a traditions headphone:
1. In power off mode,
connect one end of
the supplied Audio
Connection Cable to
the AUX Out/Line
Out/Phone Jack on
the external Audio
Player.
2. Connect the other
end to the AUX IN
Jack on the unit as
illustrated on right.
3. Play the music on the
connected Player as
usual. (Make sure the
volume level of the
connected Audio
Player is turned to high level.)
4. Using the controls on the connected external Audio Player to adjust
volume; skip tracks …. Etc.
NOTE: When the Audio Connection Cable inserted into the AUX IN
Jack, the unit will automatically shut off. Unplug the cable from the
unit before use BT (Bluetooth).
To the AUX Out /
Line OUT / Phone
Jack on the
external
Audio Player
To AUX IN Jack
on the unit
6. To shut off the unit, press and hold the Button on the unit until
5. If the unit is paired to a Cell Phone:
• When a call is incoming during an active music session:
Press the Button then speak to the Microphone to answer the
call. When your call is complete, press the Button to
disconnect or end the phone call and resume to music playback.
Or, press and hold the Button approximately 1 second to
decline the incoming phone call then resume to music playback.
• Quick press the Button twice to redial the last telephone number
your cell phone called.