Owner’s Manual MBP5120F/F7 Blu-ray Disc / DVD Player © 2010 Funai Electric Co., Ltd. E5S02_03UD_MBP5120F_F7_OM_EN.
INTRODUCTION Safety Instructions The model and serial numbers Model No.: of this unit may be found on the cabinet. Serial No.: You should record and retain those numbers for future reference. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Note about Recycling • This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. • Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
CONTENTS INTRODUCTION................................................................2 Safety Instructions ................................................................... 2 Supplied Accessories .............................................................. 4 Trademark Information .......................................................... 6 Front Panel ................................................................................. 7 Rear Panel ...........................................................
Trademark Information “BONUSVIEW” is trademark of Blu-ray Disc Association. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. "BD-Live" and "BD-Live" logo are trademarks of Blu-ray Disc Association. VUDUTM is a trademark of VUDU, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.
Front Panel 1 2* 3 OPEN/ CLOSE 4 5* 6 STOP 7 8 PLAY STANDBY/ON SD card 9 (*) The unit can also be turned on by pressing these buttons. 1. Disc tray 2. A OPEN/CLOSE button* 3. Infrared sensor window 4. C STOP button 5. B PLAY button* 6. PLAY indicator • This indicator lights up in green when discs or SD cards play back. 7. STANDBY/ON indicator • This indicator lights up in red when the power is in the standby mode. 8.
Remote Control STANDBY/ON 1 13* 2 3 14 4 15 5 16 6 7* 8 9 17 18 19 20 10 21 11 12 22 23 24 25 (*) The unit can also be turned on by pressing these buttons. 1. STANDBY/ON y button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) 2. RED / GREEN / BLUE / YELLOW button • Press to select items on some BD menus. • When file list / thumbnail list is shown, press to switch between pages. 3.
24. MODE button • During BD or DVD playback, press to display the setting for the rapid playback and the picture adjustment. • During BD, DVD and CD playback, press to display the setting for the virtual surround. • During BD playback, press to turn the picturein-picture feature on or off (only applicable to BD-video which supports the PIP function). • During the JPEG playback, press to display menus for changing the visual effect for switching the image or changing the size of the image.
CONNECTIONS Connection to the TV HDMI Video / Audio Connection (Supports up to 1080i / 1080p, 1080p24 resolution.) Your TV COAXIAL L LAN Wireless LAN HDMIOUT R AUDIO OUT VIDEO OUT HDMI IN HDMI cable(not supplied) HDMIOUT • No analog audio connection required. • Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. • High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for optimal compatibility. Picture is not displayed on the TV screen ...
Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
Connection to the Network By connecting this unit to the Internet, you can access VUDU services and applications, BD-Live features on a Blu-ray Disc and perform network update. - For more information about software update, refer to “Network Update” on page 41. - For more information about BD-Live, refer to “Enjoying BD-Live Discs with Internet” on page 22. - For more information about VUDU, refer to“VUDU Operations” on page 25. Note • Wired connection is recommended when using following features.
Wireless Connection Make the following connection if you are using a wireless router. Networking equipment (modem,etc.) COAXIAL L LAN Wireless LAN HDMIOUT R AUDIO OUT VIDEO OUT Internet LAN WAN Hub or wireless broadband router LAN cable(not supplied) Note • After you made the wireless connection, set up necessary network settings. (For network setting of wireless connection, refer to “Wireless” on page 38.) • For a wireless router, use a router which supports IEEE 802.11 b/g/n.
PLAYBACK Information on Playback Before you start playing back a disc, read the following information. Playable Discs and Files Playable discs Blu-ray Disc - BD-video (single / dual layer) - BD-RE ver. 2.1 (single / dual layer) (Recorded in BDMV format) - BD-R ver. 1.1 / 1.2 / 1.3 (single / dual layer) (Recorded in BDMV format) (Unclosed discs may not be played back.
Disc information Region Codes This unit has been designed to play back BD-video with region “A” and DVD-video with region “1” or “ALL”. You cannot play back BD-video or DVDvideo that are labeled for other regions. Look for the symbols on your BD-video or DVD-video. If these region symbols do not appear on your BDvideo or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world.
Reading the SD Memory Card You can play back the JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the following functions. - Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional contents, refer to the instruction book that came with the disc.) - BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more information about BD-Live, refer to page 22.
- [C (stop)] is pressed while in the Resume-OnStop mode. - the parental level is changed. - the disc tray is opened. • In the “SD Card” mode, the resume information will be cleared when; - [C (stop)] is pressed while in the Resume-OnStop mode. - the SD Memory Card is removed. - the unit is turned into the standby mode. Note may appear at the top-right on the TV screen • when the operation is prohibited by the disc or this unit. • During the playback of 2-layered disc, pictures may stop for a moment.
3. Press [C (stop)] to stop playback. It is recommended that files to be played back in this unit are recorded under the following specifications: • Upper limit : 2,560 x 1,900 dots (sub sampling is 4:4:4) 5,120 x 3,840 dots (sub sampling is up to 4:2:2) • Lower limit : 32 x 32 dots • File size of image maximum : 12 MB Note • Unrecognizable characters will be replaced with asterisks. • Some unplayable folders or files may be listed due to the recording status.
Fast Forward / Fast Reverse 1. During playback, press [D (forward)] repeatedly for fast forward. During playback, press [E (reverse)] repeatedly for fast reverse. Every time you press [D (forward)] or [E (reverse)], the playback speed will change. 2. Press [B (play)] to return to normal playback. Note • For BD and DVD, speed changes in 5 different levels. • For audio CD, speed changes in 3 different levels.
2 3 4 5 6 7 8 audio CD: JPEG: “CD-DA” will be displayed. Current Disc, SD Memory Card, or folder name will be displayed. Track / Track / Folder / File list in the Folder / File original order list: Programmed Track / File list in the list : programmed order Cumulative playback time of all tracks in the programmed list (audio CD only) Playback status Current page / Total page number Operation Press [RED] to go to the guide: previous page in the track / file list.
• To repeat the current track / file in the random selection, press [REPEAT] repeatedly until “ Track” appears during playback. To repeat the entire random selection press [REPEAT] repeatedly until “ All” appears during playback. • Playback from a desired track / file is not available during random playback. • In stop mode, press [RETURN] to switch to the program playback mode. Rapid Playback This function plays back approximately at 1.3 times the normal playback while keeping the sound output.
PIP (BONUSVIEW) Setting Some BD-videos have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video. primary video secondary video 1. During playback, press [MODE] repeatedly until the PIP function appears. 2. Use [K/L] to select the secondary video you want. • The secondary video will be displayed and the secondary audio will be output.
Search Using [H/G (skip)] 1. During playback, press [G (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [H (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEG files, press [H (skip)] to go back to the previous file. Note • For BD and DVD, if title contains no chapters, [H/G (skip)] changes the title. • For JPEG files, [s/B] is also available.
Note • Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu. • If 4-digit-language code appears in the subtitle menu, refer to “Language Code List” on page 45. • If the disc has no subtitle language or subtitle style, “Not Available” will be displayed on the TV screen.
3 Press [RETURN] to exit. • You can also set “BD Audio Mode” from the setup menu. Refer to page 28. Note • In “Mix Audio Output” mode, if there is no secondary and interactive audio, the audio will be output as “HD Audio Output” mode. NETWORK OPERATIONS VUDU Operations With this unit, you can enjoy VUDU HD ondemand movies / TV episodes and Internet applications. - For complete instructions on using VUDU service, please visit www.vudu.com/docs to view an updated in-depth online manual.
Renting or Purchasing VUDU Movies / TV Episodes After activating this unit, you are ready to purchase or rent movies / TV episodes and watch directly on your TV. 1. Press [RED] while opening screen is displayed. • For opening screen, refer to page 9. 2. Use [K/L/s/B] to select “VUDU movies”, then press [OK]. • VUDU movies home screen will appear. 3. Use [K/L/s/B] to select “Most Watched” , “New on Vudu” or “Explore Catalog”, then press [OK]. 4.
A) If “B” does not appear on the right side of the setting items when you select the items: Press [OK] repeatedly to change options. B) If “B” appears on the right side of the setting items when you select the items: 1) Press [OK]. 2) Use [K/L] to select options, then press [OK]. • Use [s] or [RETURN] to go back to the previous screen. 5. Press [SETUP] to exit. Custom “ Custom” menu contains all the setting items. 1. In stop mode, press [SETUP]. 2. Use [K/L] to select , then press [OK]. 3.
*1) An individual picture on the TV screen is called “Frame”, which consists of two separate images called “Field”. Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics. Note for “HDMI Video Resolution” • Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output.
HDMI Audio Out Setting When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 28. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited to your connected device.
Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack) This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the following table. How to navigate through “HDMI Multi(LPCM)”: 1) Use [K/L] to select your desired menu item then press [OK]. 2) Use [K/L] to select your setting items. • Press [RETURN] to go back to the previous screen.
Menu Setting items Channel Level Test Tone: Tests or sets the volume for each “Test Tone” is the test tone which speaker. can be output from the speakers so you can adjust the volume for each speaker. Front Lch Center Subwoofer Front Rch Surround Rch Surround Back Rch Surround Back Lch Surround Lch Default Delay Time Distance This is a parameter for optimizing the timing at which the sound outputs from the speakers according to the distance from Front the listening position.
Parental Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc. Parental BD Rating Level DVD Rating Level Password Change All All 1. Use [K/L] to select , then press [OK]. 2. Use [the Number buttons] to enter your 4-digit password.
Others Others Angle Icon fun-Link (HDMI CEC) Mode Select Network Connection Software Update On Off Disc • To select the setting items and options, refer to “ Custom” on page 27. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . • Settings with (*) are the default. Setting items Angle Icon fun-Link (HDMI CEC) Sets whether to utilize the funLink (HDMI CEC) function. Refer to page 35.
Setting items Network Connection • Refer to page 36 for more information.
Setting items Software Update Allows you to update this unit’s firmware. Refer to page 41. Options/Descriptions Current Version Indicates the current firmware version. Disc Update No* Allows you Yes to update this unit’s software using a disc. Network No* Update Yes You can update the software version by connecting this unit to the Internet. fun-Link (HDMI CEC) fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard.
Network Connection [SETUP]B B“Others“B“Network Connection” Set up network connection settings in order to use BD-Live, VUDU or network update function. Connection Test After you enable a network connection or change the network settings, always perform the connection test to check if the connection is correctly made. 1. In “Network Connection” menu, use [K/L] to select “Connection Test”, then press [OK].
1. Follow steps 1 to 2 in “Easy (Wired)” on page 36. 2.Use [K/L] to select “Custom”, then press [OK]. - Setting menu of “Custom”(wired) will be displayed. 3. Use [K/L] to highlight the item you want to set. • ”MAC Address” is for viewing only and cannot be selected. 4. Find the instruction for the item from the following, and set the item. IP Address Setting / DNS Setting 1. Press [OK] repeatedly to select the desired setting. “Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”.
a) Use [K/L] to select “Proxy Address”, then press [OK]. Proxy address setting screen will appear. Enter proxy address. • The keyboard screen will appear. Others Proxy Address _ 1 a k u 2 b l v Clear 3 c m w 4 d n x 5 e o y 6 f p z All Clear 7 g q . 8 h r - 9 i s _ a/A/@ 0 j t OK OK [K/L/s/B] : Move the highlight. [the Number buttons] : Enter number. [OK] : Enter the highlighted number/ word. [RED] : Clear the entered number or word. [GREEN] : Clear all the entered numbers or words.
In order to use a wireless network, you must set up the connection to the wireless router. Find wireless network Search for wireless networks automatically and select the wireless network name (SSID) from the list. 1. In “Network Connection” menu, use [K/L] to select “Network Selection”, then press [OK]. 2. Use [K/L] to select “Wireless”, then press [OK]. 3. Use [K/L] to select “Wireless Router”, then press [OK]. 4. Use [K/L] to select “Find wireless network”, then press [OK].
Manually enter your SSID Set up the connection to the wireless router manually by entering the wireless network name (SSID). 1. Follow steps 1 to 3 in “Find wireless network” on page 39. 2. Use [K/L] to select “Manually enter your SSID”, then press [OK]. • Wireless Router Name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor buttons, number buttons and color key, then press [YELLOW].
Software Update [SETUP]B The indicators show the progress status... (Success) PLAY indicator lights up. B“Other“B“Software Update” This unit lets you update the software yourself using a software update disc. To update the software, you must first download the latest version software to a disc, then execute “Software Update”. STOP PLAY STANDBY/ON (Error)* PLAY and STANDBY/ON indicators flash. STOP PLAY STANDBY/ON Current Version You can confirm the current software version. 1.
Initialize Menus to reset player settings, format SD card, clear erased BD-ROM data or network settings, and deactivate VUDU. 1. In stop mode, press [SETUP]. 2. Use [K/L] to select , then press [OK]. 3. Use [K/L] to select a desired option, then press [OK]. “Setup”: Resets the setup menu to the default. The setting for “Parental”, “Network Connection” and “Mode Select” will not be reset. “Format SD Card” (Available only when an SD Memory Card is inserted.): Initializes the SD Memory Card.
OTHERS Troubleshooting If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution No power. - Check if the AC cord is properly connected. - Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again. No sound or picture. - Check if the connected TV is turned on. - Check if the connections are made securely and correctly. - Check whether the connected TV or other device supports HDCP.
Problem The unit cannot read BD / DVD/ CD. Solution - Condensation? (Let sit 1 or 2 hours) - Check if the disc is compatible with this unit.(Refer to page 14 .) - Wipe the dirt off the disc or replace the disc. Angle does not switch. - The angle cannot be switched for BD / DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. Playback does not start when - Check the settings in “Parental” menu. the title is selected.
Language Code List Language Code A-B Language French [FRE] Code Language Code Language 5264 Macedonian 5957 Siswat Code 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak [SLO] 6557 Afar 4747 Galician 5358 Malay 5965 Slovenian 6558 Afrikaans 4752 Georgian 5747 Malayalam 5958 Somali 6561 Albanian 6563 German [GER] 5051 Maltese 5966 Spanish [SPA] 5165 Amharic 4759 Greek [GRE] 5158 Maori 5955 Sundanese 6567 Arabic 4764 Greenlandic 5758 Marathi 5964
Specifications General Signal system NTSC color Power requirements 120 V AC, 60 Hz Power consumption 16 W (standby: 0.5 W) Dimensions (width x height x depth) 14.2 x 2.0 x 8.5 inches (360 x 50 x 214.5mm) Weight 4.04 lbs. (1.
MEMO 47 E5S02_03UD_MBP5120F_F7_OM_EN.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.