Installation Instructions

12
•Indicate “bt” will appear on the LCD Display and blink.
3. Wait a few seconds until the unit is automatically paired to the external BT Device. The indicate “bt”
on the LCD Display and Indicator on the front of unit will stop blinking.
4. After pairing is complete you may now play music with your external BT Device.
AUX (in):
1. Insert one end of the Audio Connect Cable (not included) to the AUX Out; Line Out or Phones
Jack on the external Audio Player.
2. Insert the other end to the AUX (in) Jack on the left of unit.
3. Slide the Function Selector to BT/CD/AUX position to turn on the unit. The unit will
automatically switch to AUX (In) mode. The LCD Display will illuminate and indicator “AUX” will
appear.
4. Play the music on the connected external Audio Player as usual.
5. Turn the VOLUME Knob to adjust volume level as desired.
6. When finished listening, slide the Function Selector to OFF position to power off the unit.
NOTES:
Make sure the sound output level of the connected external Audio Device is on high level.
Otherwise, sound will weak.
If sound is distorting, reduce the volume of the connected external Audio Player or set the EQ
mode of it to normal.
DECORATIVE LED LIGHTS:
Press the Button on the top of unit repeatedly to set the blinking modes or turn it off as desired.
HEADPHONE JACK:
For private listening, connect the 3.5mm plug from the Earphone/Headphone (not included) into the
HEADPHONE Jack on the left of unit. Sound from speakers will be auto cut.