Introduction Owner's Manual Playback INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Recording NEED HELP FAST? READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE. IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE, YOU MAY ACCESS OUR ONLINE HELP AT WWW.MAGNAVOX.COM/SUPPORT OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT. Basic Setup THANK YOU FOR CHOOSING MAGNAVOX.
SAFETY INFORMATION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. Model No.: Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
SAFETY INFORMATION Introduction Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. Connections LASER SAFETY This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.
SAFETY INFORMATION Supplied Accessories Remote Control (NC003UD) with AA (1.5 V) battery x2 Cleaning g the cabinet • Wipe the front panel and other exterior surfaces of the unit with a soft cloth. • Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. Cleaning g discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out.
SAFETY INFORMATION Introduction Trademark Information Kodak and KODAK Picture CD Compatible are trademarks of Kodak used under license. Connections HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
CONTENTS Introduction Recording SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 FEATURES . . . . . . . . . . . . . . . . . . . . . .
CONTENTS Editing 66 68 68 69 Basic Setup Recording Function Setup LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES Features This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on HDD or DVD and edit them after that. The following features are offered with this unit. Recording This unit allows you to record on the HDD, a DVD+RW/RW (rewritable) and a DVD+R/-R (one-time write). You can choose any one for your convenience. Even if you choose DVD-RW/-R, these discs will automatically be recorded in the DVD+VR mode.
FEATURES Symbols Used in this Owner’s Manual HDD To specify for which media type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible recording format are not playable. * DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 98). * DVD-R recorded in the mode other than +VR is not recordable on this unit.
FUNCTIONAL OVERVIEW Front Panel 1 2 3* 4 5 15 6 7 8* 9 10 14 13 12 11 (*) The unit can also be turned on by pressing these buttons. 1. y STANDBY/ON button Press to turn on the unit, or to turn the unit to the standby mode. (To completely shut down the unit, you must unplug the AC power cord) 2. Disc tray Place a disc when opening the disc tray. 3. AOPEN/CLOSE button* Press to open or close the disc tray. 4. Display Refer to “Front Panel Display” on page 14. 5.
FUNCTIONAL OVERVIEW Introduction Rear Panel 1 2 4 3 VIDEO VIDEO IN OUT IN L 5 Y L Connections OUT R ANTENNA 12 AUDIO IN (L1) IN R S-VIDEO AUDIO OUT 11 10 9 OUT COAXIAL S-VIDEO 8 7 6 Recording 8. COMPONENT VIDEO OUTPUT jacks Use to connect a TV monitor with component video inputs with a component video cable. 9. AUDIO OUT jacks Use to connect a TV monitor, AV receiver or other device with an RCA audio cable. 10.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 1 2 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW Recording Playback Editing Function Setup Others Español EN E2S02UD_MDR515H_F7_EN_v2.indd 13 Basic Setup 19. OPEN/CLOSE A button* • Press to open or close the disc tray. 20. REPEAT button • Press to display the repeat menu. 21. HDMI button • Press to set the HDMI connector’s video signal output mode. 22. CLEAR button • Press to clear the information once entered, to clear the marker settings, or to cancel the programming for CD, etc. 23. TIMER PROG.
FUNCTIONAL OVERVIEW Front Panel Display 2 1 PM 3 DTV BS CS DR CD VCR DB HDD DVD 4 5 1. PM 4. Current status of the unit : Appears in the afternoon with the clock display. : Appears when playback is paused. 2. DTV : Appears when playing back an HDD or disc. : Appears when the channel is in DTV mode. : Appears when the timer programming or OTR has been set and is proceeding. 3. Title /track /file and chapter mark : Appears when indicating a title / track / file number.
CONNECTION Introduction Read this first: 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) After making all the connections, connect the AC power cords of the devices. Antenna Connection (Required) IN VIDEO VIDEO IN OUT L Basic Setup rear of this unit RF coaxial cable Y L OUT R ANTENNA AUDIO IN (L1) IN R S-VIDEO AUDIO OUT OUT COAXIAL S-VIDEO ANT.
CONNECTION Connecting to a TV Using Audio / Video jacks VIDEO IN RCA video cable VIDEO OUT AUDIO IN L L RCA audio cable R R AUDIO OUT rear of this unit VIDEO VIDEO IN OUT IN Y L L OUT R AUDIO IN (L1) ANTENNA R IN S-VIDEO AUDIO OUT OUT COAXIAL ANT.
CONNECTION Introduction Connecting to a TV Using Component Video Out jacks AUDIO IN L RCA audio cable R Connections COMPONENT VIDEO IN Y VIDEO OUT (Green) (Green) Y L (Blue) RCA component video cable (Red) (Blue) PB /CB (Red) PR /CR Basic Setup R COMPONENT VIDEO OUTPUT AUDIO OUT rear of this unit VIDEO VIDEO IN OUT IN L ANT.
CONNECTION HDMI Mode and Actual Output Signals Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.
CONNECTION Introduction Connecting to a Cable / Satellite Box RCA video cable RCA audio cable VIDEO IN R RCA audio cable cable/satellite box R IN S-VIDEO AUDIO OUT rear of this unit ANT.OUT ANT. IN ANT.
CONNECTION Connecting to a TV without Audio / Video jacks VHF / UHF antenna rear of this unit VIDEO VIDEO IN OUT IN L Y L OUT R ANTENNA RF coaxial cable AUDIO IN (L1) IN R OUT S-VIDEO AUDIO OUT COAXIAL S-VIDEO IN VIDEO OUT or RCA video cable L cable TV company OUT R ANTENNA AUDIO OUT RCA audio cable ANT. IN rear of your RF modulator (not supplied) RF coaxial cable RF coaxial cable Set channel 3 or 4 ANT.
CONNECTION Introduction Digital Audio Connection Dolby Digital decoder rear of this unit COAXIAL digital audio coaxial cable VIDEO VIDEO IN OUT IN L Y L OUT R IN OUT S-VIDEO AUDIO OUT Connections R AUDIO IN (L1) ANTENNA COAXIAL S-VIDEO COAXIAL digital audio coaxial input jack HDMI Audio Connection rear of this unit VIDEO VIDEO IN OUT IN Y L HDMI IN L OUT HDMI cable R ANTENNA AUDIO IN (L1) R IN S-VIDEO AUDIO OUT OUT COAXIAL S-VIDEO Basic Setup AV receiver / amplifier wi
BEFORE YOU START Finding the Viewing Channel on your TV After you have completed all the connections, you must find the viewing channel (external input channel) on your TV. 1 2 3 After you have made all the necessary connections, press [STANDBY/ON y] to turn on the unit. Turn on your TV. • If connected to your VCR make sure it is switched off or in standby mode before proceeding. Press “2” on the TV’s remote control, then press channel down button repeatedly until you see “Initial Setup” menu.
BEFORE YOU START This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc or the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
BEFORE YOU START HDD / DVD Information / Menu Title / File Name Information 6 1/ 5 7 1/ 5 0:01:00 / 1:23:45 DVD Video Title Name My Title CH 10 5 1 2 File Name DVD SP(2Hr) 4 1h53m My File 3 * This is an example screen only for explanation. Displayed items may vary depending on the disc you insert. 1. Indicates the file type or a disc type and format mode. (DVD mode only) 2. Indicates a channel number or selected external input channel. 3.
BEFORE YOU START Press [MENU] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. General Setting Timer Programming Title List Disc Edit HDD Menu Dubbing DISC Playback Mode General Setting Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Variable Skip / Replay Playback Playback Display Video Recording Clock Channel HDMI Editing 1.
BEFORE YOU START Disc Edit / HDD Menu / Dubbing / DISC Playback Mode Disc Edit 1 2 3 4 Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Disc Edit 1 2 3 4 Edit Disc Name Erase Disc Finalize Disc Protect OFF ON Disc Edit 1 3 2 4 3 Edit Disc Name Finalize Disc Protect OFF ON DISC Playback Mode 5 1 6 2 7 3 4 Random Play Program Play PBC (Video CD only) DISC
BEFORE YOU START Introduction Switching HDD / DVD Mode Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode) you wish to operate. HDD mode DVD mode Press [HDD] to activate the HDD component. Press [DVD] to activate the DVD component. Connections Basic Setup HDD button DVD button DVD button HDD button Recording Playback How to Insert a Disc A] to open the disc tray. Editing 2) Place the disc on the disc tray with its label side facing up.
INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. 1 2 Follow the procedure in “Finding the Viewing Channel on Your TV” on page 22 to display “Initial Setup” menu. Use [K / L] to select your desired language, then press [OK]. Initial Setup Language English Français Español 3 Use [K / L] to select the type of broadcasting signal, then press [OK]. Initial Setup Channel Preset Make sure the antenna is connected to “ANTENNA IN” jack.
CHANNEL SETTING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. “General Setting” menu will appear. Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. Use [K / L] to select the type of broadcasting signal, then press [OK]. Auto Channel Preset Editing When scanning is over, press [MENU] to exit. Playback The unit will start getting channels available in your area.
CHANNEL SETTING Adding / Deleting Channels You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding a channel is only available for the analog TV channels. Make sure: • You perform the “Auto Channel Scan” before adding or deleting the channels. 1 2 3 4 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels. Press [MENU] and use [K / L] to select “General Setting”, then press [OK].
CHANNEL SETTING DIGITAL Manual Channel Preset 2 Add Delete 6 Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete. Recording CH 5 • Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number) • Use [CHANNEL / ] to cycle through only the memorized channels. • You cannot use [{ { / B] for the digital TV channel selection. • Use [the Number buttons] to select a channel directly.
SETTING THE CLOCK Auto Clock Setting This unit can set the time and date automatically by referring to a channel that carries a clock information. If a PBS (public broadcasting station) is available on Cable in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 34. Make sure • The cable TV connections are correct. • Channels are set. (Refer to page 29.
SETTING THE CLOCK 7 Use [K / L] to select the desired time zone, then press [OK]. 1 2 8 Press [MENU] to exit and turn the unit to the standby mode. Manual Auto Clock Setting Use [the Number buttons] or [K / L] to enter your Cable TV Analog PBS channel number, then press [OK]. 1 Press [MENU] to exit and turn the unit to the standby mode. Digital Auto Clock Setting Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
SETTING THE CLOCK Manual Clock Setting Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. 1 2 3 4 “General Setting” menu will appear. Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Clock Setting”, then press [OK]. Use [K / L] to select calendar or time, then press [OK].
TUNER SETTINGS You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Press [DTV/TV] on the remote control. • The analog mode and digital mode switch alternately. Select channels by using [CHANNEL / ] or [the Number buttons] found on remote control.
TUNER SETTINGS Selecting TV Audio This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded. Digital TV 1 Press [AUDIO] to cycle through available audio languages. English 1/2 • When you press [AUDIO], selected language will be displayed on the TV screen. • Every time you press [AUDIO], the language will be switched. e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3 • Available languages differ depending on the broadcast.
TUNER SETTINGS “General Setting” menu will appear. Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. Basic Setup Use [K / L] to select “TV Audio Select”, then press [OK]. Use [K / L] to select “Stereo” or “SAP”, then press [OK]. TV Audio Select Recording Stereo SAP Stereo: Outputs main-audio. SAP (secondary audio program): Outputs sub-audio. Playback 5 Connections 1 2 3 4 Press [MENU] and use [K / L] to select “General Setting”, then press [OK].
TUNER SETTINGS DTV Closed Caption Digital TV Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. 1 2 3 Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. 4 Use [K / L] to select “Caption Service”, then press [OK]. 5 Use [K / L] to the desired DTV closed caption, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select “DTV CC”, then press [OK].
TUNER SETTINGS Introduction Closed Caption Style Digital TV Digital TV can also change the style of its closed caption such as font, color or size, etc. 5 Use [K / L] to select “ON”, then press [OK]. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select “CC Style”, then press [OK]. Recording Language Screen Saver FL Dimmer DTV CC CC Style V-Chip Basic Setup 4 Use [K / L] to select “User Setting”, then press [OK]. “General Setting” menu will appear.
TUNER SETTINGS 6 Use [K / L] to select the item and switch the setting for each item you want to set, then press [OK]. Edge type of the displayed caption can be switched as below. Edge Type • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed. • The setting description for each item is shown below. None Raised Depressed Uniform L.Shadow R.Shadow Font size of the displayed caption can be switched as below.
INFORMATION ON RECORDING Recordable Discs Unrecordable Discs Logos Attributes • DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 98). • DVD-R recorded in the mode other than +VR is not recordable on this unit. Maximum recordable numbers of title / chapters HDD : DVD+R DVD-RW DVD-R DVD : Basic Setup DVD+RW 8cm/12cm, single-sided, single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.
INFORMATION ON RECORDING Recording Mode About HDD You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.
BEFORE RECORDING 1) Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. 2) Use [K / L] to select “Display”, then press [OK]. 3) Use [K / L] to select “DTV CC”, then press [OK]. 4) Use [K / L] to select “Recording”, then press [OK]. • If “Caption Service” is set to “OFF”, you cannot select “Recording”. 5) Use [K / L] to select “ON”, then press [OK].
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first. 1 Insert a recordable disc (refer to page 27 on how to insert a disc). Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 41 for the list of compatible discs.) It may take a while to load the disc data after the disc tray closes.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING “I HDD” or “I DVD” will be displayed for 4 seconds. e.g.) DVD SP(2Hr) As for DVD recording, the title list will appear automatically after writing to a disc complete. (Refer to “Guide to a Title List” on page 82.) e.g.) DVD+R 2h00m Connections I DVD 5 Press [STOP C] to stop recording. Introduction 4 Press [REC] to start recording. Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC] again to restart recording.
AUTOSTART RECORDING Every time you turn on this unit, this unit automatically records the channel currently viewed and temporarily stores the recorded content to the HDD (Autostart recording). By using this function, you can pause or go back the TV program you are currently watching, and you can also start recording the whole TV program even at the middle of the TV program. The temporary recording can be made up to 6 hours of time range.
TIMER RECORDING Use [K / L] to select “New Program”, then press [OK]. Basic Setup Timer Programming THU FEB/04 11:30AM Skip Date Start End New Program Connections 1 2 Press [TIMER PROG.]. Introduction You can program the unit to record up to 36 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Set the clock before setting a timer programming.
TIMER RECORDING 5 Use [K / L / s / B] to select analog (“- - -”) / digital (“DTV”) mode or external input (L1 / L2), then press [B]. e.g.) external input mode Skip OFF CH L1 Date FEB/05 REC To HDD Start 10 : 30AM Mode SP SP Date FEB/05 REC To HDD Start 10 : 30AM Mode SP SP 6 Date FEB/05 REC To HDD Start 10 : 30AM Mode SP SP Skip OFF CH DTV 69.1 1h00m End 11 : 30AM 1h00m e.g.) digital mode Skip OFF CH DTV 69.
TIMER RECORDING Introduction How to select a channel number for the timer recording For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number. Analog Cable TV For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13125), the channel will be decided as soon as you enter the channel number.
TIMER RECORDING If the timer program did not complete correctly, the error number appears in the timer programming list. Timer Programming THU FEB/04 11:30AM Skip p Date E41 FEB/05 Start End 10:30AM 11:30AM New Program CH DTV69. 1 Each error number means: E1-22 Recording error other E44 E37-39 than below Already 254 chapters recorded E24 E45 Copy prohibited program E46 It is impossible to record additionally on a disc recorded by other units when setting “Make Recording Compatible” to “OFF”.
TIMER RECORDING Connections Basic Setup Recording • If there is a power failure or this unit has been unplugged for more than 1 hour, the clock setting and all timer programming will be lost. • When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to page 48).
SPECIAL RECORDING Overwriting from the Beginning of the Title You can overwrite the existing title from the beginning. 1) Press [STANDBY/ON y]. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten. It takes a while to display the title list. Title list will appear. If the title list does not appear, press [TITLE]. 3) Press [REC MODE] repeatedly to select a recording mode. Refer to “Recording Mode” on page 42.
SPECIAL RECORDING When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.
DUBBING Information on Dubbing You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to pages 41-43 to see the recording compatibility. Guide to Dubbing Menu Display 1 2 3 HDD Recording Mode for Dubbing DVD ABCDE HQ (1Hr) (0:30:00) JAN/ 4/2010 Add Delete All Dubbing Start 3000 MB Dubbing List 1.ABCDE 2.JAN/ 4/10 1:00AM CH22 3.
DUBBING Introduction Setting for an External Device Connect the external device properly to the unit by using either L2 and L3 (Front) or L1 (Rear) input jacks. When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear). Use S-video or the RCA audio/video cables for this connection. When connecting a DVC (digital video camcorder), use DV-IN jack of L3 (Front).
DUBBING Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 55. If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first. 1 1 6 56 1 2 Insert a recordable disc (refer to page 27 on how to insert a disc). 3 4 5 6 Press [REC MODE] repeatedly to select a recording mode. It may take a while to load the disc data after the disc tray closes.
DUBBING Guide to DV and On-Screen Display When the DVC is in video mode... 1 1/ 1 When the DVC is not in camera mode... 1/ 1 1/ 1 1/ 1 +RW Control DV Audio Start Rec DVD Stereo1 DVD SP(2Hr) DVD SP(2Hr) 1h00m 4 5 L3 (DV-IN) AB-1234 0:12:34 what mode of DVC. Switch the mode on the DVC to playback mode for the dubbing information.
DUBBING DVC to HDD / DVD Dubbing Before recording from DVC, see page 55 for connection instructions. Preparing for DV dubbing (DVC to HDD): • Make sure your DVC is in video mode. Preparing for DV dubbing (DVC to DVD): • Insert a recordable DVD. • Make sure your DVC is in video mode. If you are recording to the HDD, press [HDD] first. If you are recording to a disc, press [DVD] first. 1 Use [SOURCE] or [CHANNEL select “L3(DV-IN)”.
DUBBING Introduction The dubbing will start. To stop dubbing; A) Press [C STOP] on the unit. or B) Use [K / L] to select “Control”, then press [OK]. Use [K / L] to select “HDD” / “DVD”, then press [OK]. Then press [STOP C]. Connections 6 7 Use [K / L] to select “Start Rec”, then press [OK]. Recording Playback • If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.
DUBBING Selected Title Dubbing Preparing for dubbing (HDD to DVD): • Insert a recordable DVD. Preparing for dubbing (DVD to HDD): • Insert a disc to be dubbed. 1 2 Press [MENU] in stop mode. Use [K / L] to select “Dubbing”, then press [OK]. Menu General Setting Timer Programming Title List Disc Edit HDD Menu Dubbing 3 HDD to DVD Use [K / L] to select “HDD then press [OK]. DVD”, DVD to HDD Use [K / L] to select “DVD then press [OK]. HDD”, e.g.
DUBBING e.g.) HDD 8 Introduction 6 Repeat step 5 until you register all the titles to be dubbed, then press [DUBBING]. Use [s / B] to select a desired recording mode, then press [OK]. e.g.) HDD ➡ DVD HDD DVD Title List ABCDE 12:00AM (10:00:00) FRI JAN/ 1/10 CH10 SP 1 2 3 3 4 5 5 4 6 High HQ SP SPP LP EP Dubbing Titles 2 Press ‘DUBBING’ to confirm. 1/6 9 Use [K / L] to select “Yes”, then press [OK]. Start Dubbing? Yes No Editing One-touch Dubbing...
DUBBING One Title Dubbing (HDD to DVD only) This function lets you select one specific title from the title list for dubbing. Preparing for dubbing: • Insert a recordable DVD. 1 2 3 4 Press [HDD] first. Press [TITLE]. Use [K / L / s / B] to select a desired title to dub, then press [OK]. Use [K / L] to select “Dubbing”, then press [OK]. Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing Use [K / L] to select “Yes”, then press [OK].
PROTECTING A DISC Introduction To prevent accidental recording, editing or erasing of the titles, you can protect them from the “Disc Edit” menu. Use [K / L] to select “Disc Edit”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Basic Setup Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. Connections 1 2 3 Press [MENU]. Recording Playback 4 Use [K / L] to select “Yes”, then press [OK].
PLAYING THE DISCS ON OTHER DVD PLAYERS Finalizing a Disc You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. 1 2 3 4 Press [MENU]. Use [K / L] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. Use [K / L] to select “Finalize”, then press [OK].
PLAYING THE DISCS ON OTHER DVD PLAYERS You can finalize discs automatically using this function. You can use this function to finalize discs after finishing timer recordings and at the end of the disc space. 5 Use [K / L] to select “ON”, then press [OK]. “General Setting” menu will appear. Connections 1 2 3 4 Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. Introduction Auto Finalizing Use [K / L] to select “Recording”, then press [OK].
INFORMATION ON PLAYBACK Before you play back a DVD, read the following information. Playable Discs and Files Unplayable Discs This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back. Playable discs Logos DVD-video DVD+RW The following discs will not play back on this unit.
INFORMATION ON PLAYBACK HDD / DVD titl 1 title chapter 1 chapter 2 track 1 chapter 1 titl 2 title chapter 2 audio CD, video CD track 2 track 3 track 4 chapter 3 track 5 Basic Setup • PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically. • Some operations cannot be performed while PBC function is on.
BASIC PLAYBACK Direct Playback If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. 1 Insert a disc (refer to page 27 on how to insert a disc). Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 66 for the list of compatible discs.) It may take a while to load the disc data after the disc tray closes. 2 3 Press [PLAY B] to start playback.
BASIC PLAYBACK If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. * Make sure the disc is compatible with this unit. (Refer to page 66 for the list of compatible discs.) It may take a while to load the disc data after the disc tray closes. 3 Use [K / L// s / B] to select a desired title, then press [OK]. Recording • To exit the title list, press [STOP C]. • To resume the title list, press [TITLE].
BASIC PLAYBACK Note for DVD title list If you want to see disc information, press [{ { ] when the first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite” is highlighted. e.g.) DVD+RW 4 Use [K / L] to select “Play” (for DVD), or select “Resume Playback” or “Play from Start” (for HDD), then press [OK]. e.g.
BASIC PLAYBACK * Make sure the disc is compatible with this unit. (Refer to page 66 for the list of compatible discs.) e.g.) File list File List Recording 2 Use [K / L] to select a desired folder or track/file, then press [OK]. Basic Setup It may take a while to load the disc data after the disc tray closes. When an audio CD is inserted, the track list will appear. When a CD-RW/-R with MP3/JPEG files is inserted, the file list will appear.
BASIC PLAYBACK KODAK Picture CD Using the Title / Disc Menu The Picture CD is a service to convert photographs taken by a conventional film camera into digital data and write the data on a CD. You can enjoy picture images on the TV set by playing back the Picture CDs. For details of KODAK Picture CD, contact a shop that provides developing service of Kodak Inc. 1) Press [TITLE]. Picture CD Image 1 1 2 3 4 5 6 1/2 • To exit the Picture CD thumbnail List, press [RETURN] or [STOP C].
SPECIAL PLAYBACK Introduction Resume Playback Note You can play back from where you last stopped the disc. 1) During playback, press [STOP C]. The resume message will appear. Note Fast Forward / Fast Reverse Playback During playback, press [SKIP ] if you want to skip forward. Press [REPLAY ] if you want to skip backward. Rapid Playback Playback • For MP3/JPEG files, playback will resume from the beginning of the file at which playback was stopped.
SPECIAL PLAYBACK Step by Step Playback Chasing Playback during Recording F]. Playback will be paused and sound will be muted. 2) Press [G] repeatedly. Playback will advance one frame (or step) at a time when you press [G] with the sound muted. To play back step by step backward: Press [H] repeatedly. Every time you press the button, the playback will go backward by one frame. • Press and hold [H] / [G] to reverse / advance continuously. 3) Press [PLAY B] to return to the normal playback.
SPECIAL PLAYBACK Introduction Zoom Marker Setting 1) During playback, press [DISPLAY]. 1/ 5 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 1/ 5 0:01:00 / 1:23:45 DVD Video 2) Use [{ { / B] to select e.g.) DVD-video to display the marker list. 1/ 5 Basic Setup 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired zoom factor to zoom, then press [OK]. 1/ 5 Connections 2) Use [{ { / B] to select menu. e.g.
SPECIAL PLAYBACK Repeat Playback Note Available repeat function may vary depending the discs. 1) During playback press [DISPLAY], then proceed to step 2), or press [REPEAT] then proceed to step 3). • If the display menu is already shown, skip to step 2. 2) Use [{ { / B] to select menu. 1/ 5 to display the selection 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired repeat type, then press [OK]. e.g.
SPECIAL PLAYBACK Introduction Program Playback Playing Back the Autostart Recording You can program the disc to play back in your desired order. 2) Use [K / L] to select “DISC Playback Mode”, then press [OK]. “DISC Playback Mode” menu will appear. 4) Use [K / L] to select a desired track, then press [OK] or [B].
SEARCH Title / Chapter Search Track Search Using [H] / [G] Using [H] / [G] 1) During playback, press [G] to skip the current title or chapter and move to the next. The title or chapter will move forward one at a time. • If there is no chapter in one title, the current title will be skipped. To go back to the beginning of the current title or chapter, press [H]. Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one at a time.
SEARCH Introduction Time Search Connections 1)During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 2) Use [{ { / B] to select e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video Basic Setup e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 CD Recording will be highlighted. To move to the number next to , press [B]. When time search is not available, counter are not displayed.
SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback.
SELECTING THE FORMAT OF AUDIO AND VIDEO 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 2) Use [{ { / B] to select menu. e.g.) DVD-video Some DVD-videos have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. 1) During playback, press [DISPLAY]. 2) Use [{ { / B] to select e.g.) DVD-video to display the selection 1/ 5 , then press [OK].
INFORMATION ON EDITING Guide to a Title List Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [HDD], then press [TITLE]. Press [DVD], then press [TITLE].
INFORMATION ON EDITING Introduction Edit Menu Media Available Features Putting names on titles HDD DVD ✔ ✔ ✔ Deleting selected titles ✔ Deleting a scene of a title ✔ Adding / deleting chapter marks ✔ Connections ✔ Deleting a title ✔ ✔ Hiding chapters ✔ Dividing a title ✔ ✔ *1 Setting an index picture ✔ Finalizing a disc ✔ Making edits compatible ✔* Putting name on disc ✔ Setting or Releasing disc protect ✔ Note 2 : Not available • Once you have finalized a DVD+R/ DVD-R, you c
EDITING Deleting a Title You can delete a title which you do not need anymore. Please be advised that the title once deleted cannot be brought back. If you are editing the titles on HDD, press [HDD] first. If you are editing the titles on DVD, press [DVD] first. 1 2 Press [TITLE]. Use [K / L / { / B] to select a desired title to delete, then press [OK]. If you are editing the titles on HDD, proceed to step 4. If you are editing the titles on DVD, proceed to step 3.
EDITING HDD mode Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing 5 Use [K / L] to select “Yes”, then press [OK]. The title is now deleted. Connections Title List Title 2 12:00AM (1:00:00) MON JAN/ 4/10 CH10 SP DVD mode Introduction 4 Use [K / L] to select “Title Delete”, then press [OK].
EDITING Deleting Selected Titles You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back. 4 Use [K / L / { / B] to select the title you want to delete, then press [OK]. Title List Title 1 12:00AM (1:00:00) MON JAN/ 4/10 CH10 SP 1 2 3 4 5 6 Press ‘CLEAR’ to confirm. 1/1 Trash mark will appear indicating the title is marked for deletion. 5 Repeat step 4 until you select all the titles you want to delete.
EDITING You can put title names on the titles and change the names from this menu. Edit - Edit Title Name 1 Connections 4 Use [K / L] to select “Yes”, then press [OK]. Introduction Putting Names on Titles Yes No MY FAVORITE 1 : 05 : 00 5 Press [RETURN] once or repeatedly to go back to the title list. For DVD, the data will be written onto the disc momentarily. Recording This operation may take a while to be completed.
EDITING Chapter Marks (Add) You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. To add a chapter mark: 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 83 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Play back the title up to the point where you want to set a new chapter mark. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Add”, then press [OK].
EDITING Introduction Chapter Marks (Delete) To delete a chapter mark: Use [K / L] to select “Chapter Mark”, then press [OK]. Connections Submenu will appear. Use [H] / [G] to go to the chapter with the chapter mark number you want to delete, then press [PAUSE F]. Chapter mark number is displayed on the preview screen. e.g.) DVD 1 Recording Edit - Chapter Mark Add Delete Delete All Chapter Basic Setup 1 2 3 Follow steps in “How to Access the Edit Menu” on page 83 to display “Edit” menu.
EDITING Chapter Marks (Delete All) To delete all chapter marks: 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 83 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [K / L] to select “Delete All”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Delete All 1 Yes No Chapter 2/ 3 F NOV/21/10 11:00AM CH12 SP 1 : 05 : 00 All chapter marks are now deleted.
EDITING Introduction Dividing a Title You can divide one title into 2 new titles. Connections Play back the title up to the point where you want to divide the title. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Title Dividing”, then press [OK]. The title is now divided into 2 new titles, and it will go back to the title list automatically. Title name’s of the divided titles are identical, and index pictures are reset to the first scene at this point.
EDITING Deleting a Scene of a Title You can delete a specific part of a title. 1 2 Follow steps in “How to Access the Edit Menu” on page 83 to display “Edit” menu. Use [K / L] to select “Scene Delete”, then press [OK]. Edit 1 Scene Delete Edit Title Name Chapter Mark Title Dividing Protect JAN/ 4/10 12:00AM CH10 LP 1 : 05 : 00 3 Play back the title up to the point where you want to set a start point for the scene to be deleted, then press [OK].
EDITING 7 Edit - Scene Delete 1 Connections Every time [OK] is pressed, the deleted scene will be shown including scene material 5 seconds before and after the deleted scene. • If you are not satisfied with the result, use [K / L] to go back to “Start” or “End”, and try setting them again. • If you are satisfied with the result, proceed to step 6. Use [K / L] to select “Yes” then press [OK]. Introduction 5 With “Preview” highlighted, press [OK] to preview the result.
EDITING Protecting a Title To prevent the accidental editing, or erasing of the titles, you can protect them using the “Edit” menu. 1 2 Follow steps in “How to Access the Edit Menu” on page 83 to display “Edit” menu. Use [K / L] to select “Protect”, then press [OK]. Edit 1 Scene Delete Edit Title Name Chapter Mark Title Dividing Protect JAN/ 1/10 12:00AM CH10 LP 1 : 30 : 00 3 With “OFF [OK].
EDITING Introduction Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. Use [K / L] to select “Hide Chapter”, then press [OK]. Submenu will appear. Recording Use [K / L] to select “Hidden”, then press [OK]. Edit - Hide Chapter Visible Hidden Chapter 2/ 3 Visible Playback NOV/21/10 11:00AM CH12 SP 1 : 05 : 00 The chapter is now hidden. Press [RETURN] once or repeatedly to go back to the title list.
EDITING Setting an Index Picture You can set your desired scene as an index picture for each title. 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 83 to display “Edit” menu. Play back the title to find the scene you want to use as an index picture. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Index Picture”, then press [OK]. Use [K / L] to select “Yes”, then press [OK].
EDITING Introduction Putting Name on Disc You can put a name on the disc and change it from this menu. Press [MENU]. Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Edit Disc Name”, then press [OK]. Basic Setup e.g.) DVD+RW Recording 1 2 3 Connections Press [STOP C] if you are playing back a disc. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON A window for entering a title name will appear.
EDITING Erasing Disc You can erase all titles on a disc. Press [STOP C] if you are playing back a disc. 1 2 3 Press [MENU]. Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Erase Disc”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 4 Use [K / L] to select “Yes”, then press [OK]. When you press “Yes”, all the contents in the disc will be erased. Are you sure to erase the disc? Yes No momentarily.
EDITING Introduction Making Edits Compatible If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on another unit. Connections Press [STOP C] if you are playing back a disc. 4 Use [K / L] to select “Yes”, then press [OK]. Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Make Edits Compatible”, then press [OK]. Basic Setup 1 2 3 Press [MENU].
EDITING Deleting All Titles in HDD Press [STOP C] if you are playing back a disc. 1 2 3 Press [MENU]. Use [K / L] to select “HDD Menu”, then press [OK]. Use [K / L] to select the desired type of deletion, then press [OK]. Select “Delete All Unprotected Titles” to delete only unprotected titles. Select “Delete All Titles” to delete all titles including protected titles. HDD Menu Delete All Unprotected Titles Delete All Titles 4 Use [K / L] to select “Yes”, then press [OK].
LIST OF SETTINGS Menu Playback pages 104-107 Items (highlight is the default) Parental Lock Disc Audio ON OFF Compressing the range of sound volume. PCM 48kHz 96kHz PCM Stream Set whether the sound recorded in 96kHz will be down sampled in 48kHz. Set the type of sound signal which outputs from the digital audio output jack. Set the language for disc menu language. English French Spanish Other Audio Language Original English French Spanish Other Set the language for audio.
LIST OF SETTINGS Menu Display pages 108-110 Items (highlight is the default) CC Style Font Style pages 39-40 General Setting Contents Set font style of the displayed caption. Font Opacity Solid Transparent Translucent Flash Set the font opacity of the displayed caption. Font Color White Black Red Green Blue Yellow Magenta Cyan Set the font color of the displayed caption. Edge Type None Raised Depressed Uniform L.Shadow R.
LIST OF SETTINGS Items (highlight is the default) V-Chip Downloadable Rating Block Setting Clear the downloadable rating information and its setting. Change the password. Progressive Scan ON OFF TV Aspect 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide Video In S-Video In Video In S-Video In OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes ON OFF To set the progressive scan mode (set to "ON") or the interlace scan mode(set to "OFF"). Set a picture size according to aspect ratio of your TV.
SETUPS Playback Press [STOP C] if you are playing back a disc. 1 2 Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. 3 Use [K / L] to select a desired item, then press [OK]. 4 5 Refer to 1 to 8 on pages 105-107 and set the selected item. “General Setting” menu will appear. Use [K / L] to select “Playback”, then press [OK].
SETUPS Parental Lock (Default: OFF) (DVD only) Parental Lock If a password has not been set yet, proceed to A . If a password has been set already, proceed to B . Note Change Password? Yes No Password Input Yes Your setting will be activated. B A password has been set already. • Use [the Number buttons] to enter the current password. Password Input Your setting will be activated. • If you want to change password, use [K / L] to select “Yes”.
SETUPS 2 C Disc Audio Choose the appropriate audio setting for your external device. It will only affect disc playback. Use [K / L] to select a setting, then press [OK]. Dolby Digital PCM Stream Use [K / L] to select desired item, then press [OK]. Disc Audio A B C A Dynamic Range Control PCM Dolby Digital Dynamic Range Control (Default : ON) (DVD only) Set to “ON” to compress the range between soft and loud sounds. Use [K / L] to select a setting, then press [OK].
SETUPS Subtitle Language (Default : OFF) (DVD only) Set the subtitle language. Use [K / L] to select a setting, then press [OK]. 7 Still Mode (Default : Auto) Select “Auto” usually. Use [K / L] to select a setting, then press [OK]. Still Mode Subtitle Language Your setting will be activated. If “Other” is selected for 3 to using g [the Number buttons]. 5 , press 4-digit code - • Frame is 1 completed video image made up of 2 fields (There are 30 frames per second of NTSC video).
SETUPS Display Press [STOP C] if you are playing back a disc. 1 2 3 Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. 1 2 3 4 5 6 Language Screen Saver FL Dimmer DTV CC CC Style V-Chip Selection menu will appear. 4 5 1 Refer to 1 to 6 on pages 108-110 and set the selected item. • For 4 and 5 refer to pages 38-40. When you finish with the setting, press [MENU] to exit.
SETUPS FL Dimmer (Default: Bright) Set the front panel display brightness. Use [K / L] to select a setting, then press [OK]. FL Dimmer If “Auto” is selected, the display gets dark when the power is in the standby mode.
SETUPS [Canadian French Rating] Rating E Category 18ans+ Adult audience only higher 16ans+ Unsuitable for ages under 16 13ans+ Unsuitable for ages under 13 8ans+ Unsuitable for ages under 8 G General audience E Exempt program Downloadable Rating Set the rating system via digital broadcasting, or clear the downloaded ratings. If the broadcasting signal does not have the downloadable rating information, the message below will appear. lower Downloadable Rating is currently not available.
SETUPS Press [STOP C] if you are playing back a disc. Use [K / L] to select “Video”, then press [OK]. 1 Progressive Scan 2 TV Aspect 3 Video Input Basic Setup Use [K / L] to select a desired item, then press [OK]. Connections 1 2 3 Press [MENU] and use [K / L] to select “General Setting”, then press [OK]. Introduction Video Submenu will appear. Recording When you finish with setting, press [MENU] to exit. Playback 4 5 Refer to 1 to 2 on page 112 and set the selected item.
SETUPS 1 Progressive Scan (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 1) Use [K / L] to select “ON“, then press [OK]. Progressive Scan { / B] to select “Yes“, then press [OK]. Activating progressive scan: Check your TV has progressive scan and connect with component video cable.
SETUPS Format HDMI Audio RGB Range fun-Link (HDMI CEC) Format (Default : RGB) You can select the color space for HDMI output. Set the appropriate color space for your display device. Use [K / L] to select a setting, then press [OK]. • When the connected device is not compatible with the Y/ Cb/Cr, HDMI signal is output as RGB regardless of the setting. Playback 1 1 2 3 4 Recording 4 When you finish with the setting, press [MENU] to exit.
SETUPS 3 RGB Range (Default : Normal) You can adjust the RGB range to make the dark areas of the HDMI images brighter. Use [K / L] to select a setting, then press [OK]. • Select “Enhanced“ if the black-white contrast is not clear. • This setting is effective only for HDMI RGB output. RGB Range Normal Enhanced Your setting will be activated. 4 fun-Link (HDMI CEC) (Default : OFF) fun-Link (HDMI CEC) ON OFF over HDMI and is part of the HDMI standard.
TROUBLESHOOTING The unit turns on automatically without any operation. ”Language” menu appears every time the power turns on. Remedy • Check that the AC power cord is connected securely. • Batteries of the remote control are weak. • The unit turns on automatically 2 seconds before the timer recording. • The unit may not have been turned off correctly. Finish up the language setting procedure by selecting a language in ”Language” menu.
TROUBLESHOOTING Symptom Certain functions of the DVC cannot operate. GENERAL DV audio signal cannot be switched. No image from HDMI connection. Setup menu cannot be called up. Only specific channels do not appear. The external input channels (such as L1, L2 or L3) cannot be skipped. GENERAL CHANNEL TV channels cannot be changed. • Check if the connections are made securely and correctly. • Check if the cables are damaged. • Try channel setting by following the steps on pages 29-31.
TROUBLESHOOTING PLAYBACK HDD HDD/DVD HDD playback suddenly stops. Playback Editing Function Setup Others • When DVD recording finishes during HDD playback, the unit will stop the HDD playback, and start writing data to the DVD. This is not a malfunction. Playback cannot be performed. • Check if the playable disc is inserted. • Check if the disc is loaded correctly with the labeled side facing up.
TROUBLESHOOTING EDITING HDD / DVD Symptom Titles cannot be edited or deleted. Titles cannot be edited or deleted. DVD REMOTE CONTROL Dubbing cannot be executed. The capacity of the disc doesn’t increase even if the recorded program is deleted. Dubbing cannot be executed. Remedy • The titles or the disc itself may be protected. Cancel the protection by following the steps on page 94 for title protection and page 63 for disc protection.
TROUBLESHOOTING Error message Cause Solution • Insert the DVD-video with region codes 1 or ALL. Parental Lock On The current selected parental level prohibits playback. • The current selected parental level prohibits playback. • Check “Parental Lock” setting in “Playback” menu (page 105). Recording Error This program is not allowed to be recorded. • The recording function encountered the copy prohibited program. • You cannot record copy prohibited programs.
LANGUAGE CODE Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5
GLOSSARY PBC (playback p y control) (video CD only y) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. This function enables you to play back interactive software using a menu screen. See also “Video CD”. Aspect p Ratio Chapter p (HDD/DVD) Just as a book is split up into several chapters, a title on HDD/DVD is usually divided into chapters. See also “Title”.
SPECIFICATIONS General HDD Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity TV system Recording Recording format Recording discs Internal 3.5 inch HDD 500 GB 120V AC +/- 10%, 60Hz +/- 5% 33W (standby: 5.7W) 16.6 x 2.4 x 11.5 inches (420 x 59 x 290mm) 7.50 lbs. ( 3.
ESPAÑOL Disco Grabable Este aparato es compatible con la reproducción de los siguientes discos y archivos.
ESPAÑOL Conexión Básica cable RCA de vídeo VIDEO OUT VIDEO IN L AUDIO IN L cable RCA de audio R R AUDIO OUT parte trasera de la unidad VIDEO VIDEO IN OUT IN L Y L OUT R ANTENNA AUDIO IN (L1) IN R S-VIDEO AUDIO OUT OUT COAXIAL ANT.
ESPAÑOL Pantalla del panel frontal Señal de salida de video Connections Progresivo de 480 Introduction Modo HDMI y señales efectivas de salida Presione [HDMI] para seleccionar el modo de salida HDMI. Cada vez que se presiona [HDMI] el modo de salida varía como sigue. Presione [HDMI] Progresivo de 720 Presione [HDMI] 1080 entrelazado Presione [HDMI] Basic Setup Progresivo de 1080 Presione [HDMI] • El modo HDMI que no esté admitido por el dispositivo de exhibición será pasado por alto.
ESPAÑOL Reproducción Directa Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2. Si usted está reproduciendo los títulos de un DVD, presione primero [DVD]. 1 Presione [OPEN/CLOSE A] para abrir la bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba. Presione de nuevo [OPEN/CLOSE A] para cerrar la bandeja de discos. * Asegúrese de que el disco sea compatible con este aparato.
ESPAÑOL Preparación para el copiado (unidad de disco rígido a DVD): • Inserte un DVD grabable. Preparación para el copiado (DVD a unidad de disco rígido): • Inserte un disco a ser copiado. Utilice [K / L] para seleccionar “Doblaje”, y luego presione [OK]. Utilice [K / L] para seleccionar “HDD DVD”, y luego presione [OK]. DVD a Unidad de disco rígido 4 Utilice [K / L] para seleccionar “Añadir”, y luego presione [OK].
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
