Digital Video Discs Recorder Owner's Manual MDV630R, MDV650R

27
CConnecting additional devices
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the
IN S-VIDEO (Y/C) , IN VIDEO (CVBS) , IN COMPONENT VIDEO jacks on the recorder.
You will also use the AUDIO IN jacks of the Recorder for connecting to other devices.
Can I also connect devices with 'Progressive scan'?
The IN COMPONENT VIDEO jacks are only used for 'interlaced'
signals. Signals using progressive scan cannot be processed by the DVD
recorder.
?
Connecting an additional video recorder
You can also connect a video recorder to the input jack. Please use the IN S-VIDEO (Y/C) jack
and the IN L AUDIO R jacks for SVHS video recorders.
Please be aware
Most pre-recorded video cassettes and DVDs are copy protected. When you attempt to copy
them, the 'COPY PROT' message will appear in the DVD recorder display.
a When copying video cassettes 'NO SIGNAL' appears in the
DVD recorder display
b Check to make sure that the scart cable is inserted properly.
b If the recording is made from a video recorder, adjust the "tracking"
on the video recorder.
b The DVD recorder may sometimes not recognize video input signals
that are poor or non-standard.
a When copying from DVDs or precopied video cassettes, the
picture is grainy and the brightness fluctuates.
b This occurs when you attempt to copy copy-protected DVDs or
video cassettes. Although the picture on the TV is OK, the recording
is distorted on a DVD+R(W). Copy-protected DVDs and video
cassettes cannot be copied without these disruptions.
Problem
ENGLISH
Connecting additional devices