Installation Instructions

11
OPERATION:
GENERAL OPERATION:
1. Connect the unit to AC power as previously instructed.
2. Press the POWER Switch to ON position to power on the unit, "bt" will appear on
the display.
3. Press the MODE Button on the unit or Remote Control repeatedly to switch to
desired playback mode. The correspondent indicator will appear (or illuminate)
on the display with your selection (see list below):
Playback Mode:
Indicators:
USB
“USb” will appear on the display
(The USB device inserted into the USB PORT)
SD Card
“CARD” will appear on the display
(The SD Card device inserted into the SD slot)
AUX (Aux/Line in)
“AUH” will appear on the display & the
indicator “AUH”will illuminate
BT (Bluetooth)
“bt” will appear on the display & the
indicator“bt”will illuminate
Radio FM Band
Radio frequency “XX.X” or “XXX.X” will appear
on the display
4. During playback:
 Turn the VOLUME Control Knob on the unit or press the VOL (Volume) +/-
buttons on the Remote Control to adjust volume level as desired.
 Turn the BASS and TREBLE Control Knob on the unit to adjust bass and
treble level as desired.
 Press the Mute Button on the Remote Control to mute the sound, press
again to turn the sound back on.
 Press the EQ (Equalizer) Button on the unit or Remote Control to activate
and set the equalizer effect as desired (see list below):
Showing on display:
Equalizer effects:
FLAT
FLAT (Turn off the equalizer effect)
ROC
Rock
JA22
Jazz
POP
Pop
CLASS
Classic