Installation Instructions

19
TROUBLESHOOTING:
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power
AC/DC Adaptor had not
connected
Connected the AC/DC
Adaptor to the unit and
AC power as page 8
No sound or sound weak
Volume of the unit was set to
minimum position
Increase the volume level
by turning the VOLUME
Control Knob on the unit
clockwise and press the
VOL + Button on the
Remote Control.
Volume level of
paired/connected device is in
low level
Rise the volume level of
the paired/connected
device
Sound distortion
Volume level too high
Reduce the volume level
by turning the VOLUME
Control Knob on the unit
counterclockwise and
press the VOL – Button on
the Remote Control
Volume level of the
connected/paired device too
high
Reduce the volume level
of the connected/paired
device
BT not functioning
Unit not in BT mode
Press the MODE Button on
the Unit or Remote
Control repeatedly until
indicator “bt” appear on
the display and blink to
enter to BT playback
mode
The external BT Device had
NOT paired to the unit
Pair the external BT
Device to the unit as page
12-13
The external BT device too far
from the unit
Place the external BT
device close to the unit