Installation Instructions

18
USB:
To play the music in external USB Device:
1. In standby mode, insert the USB Device into the USB Port on the front of unit as
illustrated below:
2. Power on the unit as previously instructed.
3. Press the Mode Button on the Unit or Remote Control repeatedly until “USb”
appear on the display to enter to USB playback mode.
4. Wait a few seconds, the unit will automatically play the first track on the USB
Device.
Note: If no USB Device was inserted into the USB Port. A few seconds later, the
unit will turn to CD playback mode automatically.
5. During playback:
 Press the ►II/PP Button on the unit or Remote Control to pause, press again
to resume normal playback.
 Press the I◄◄ or ►►I buttons repeatedly to skip tracks.
 Press the ◄◄ or ►► buttons on the Remote Control to search the
specific section then press the ►II/PP Button to resume normal playback.