User guide

12
English
8240 009 34241
Controls (illustrations on page 3)
Controls on the system and
remote control
1 STANDBY ON y
– to switch the system on or to standby mode.
2 SOURCE
– to select the respective sound source : CD,
TUNER, TAPE or AUX.
3 PROGRAM / 9
for CD ................. press to stop playback or to
clear a program.
for CD/Tuner ... to enter programming mode.
4 PLAY•PAUSEÉÅ
for CD ................. to start or interrupt playback.
5 S T
for CD ................. press to select a desired track.
................................. press and hold to fast reverse/
forward the disc.
for Tuner ............. press to tune to a lower or
higher radio frequency.
6 REPEAT / SLEEP
for CD ................. to repeat a track/ entire CD.
for Timer ............. to activate/deactivate or set the
sleep timer.
7 Tape deck
8 Tape Deck Operation
â .......................... to start recording.
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback/recording or to
open the tape door.
Å .......................... to interrupt playback or
recording.
9 DSC (DIGITAL SOUND CONTROL)
– to select the desired sound effect : OF (flat),
RO (rock), PO (pop) or JA (jazz).
0 DBB (DYNAMIC BASS BOOST)
– to enhance the bass
! VOLUME (VOL +/-)
– to increase or decrease the volume.
@ Display screen
– to view the current status of the system.
# n
– connect headphones.
$ Disc tray
% OPEN/CLOSE ç
– to open or close the disc tray.
^ BAND
for Tuner ............. to select waveband : FM or AM.
& REPEAT
– to repeat a track / entire disc.
* SHUFFLE
– to play CD tracks in random order.
( ¡ / ™
for CD ................. to select a desired track.
for Tuner ............. to select a preset radio station.
) MUTE
– interrupts and resumes sound reproduction.
¡ à / á
for CD ................. press and hold to fast reverse/
forward the disc.
for Tuner ............. press to tune to a lower or
higher radio frequency.
for Clock ............ to set the hours and minutes.
™ TIMER
– to activate the timer/clock function.
£ SLEEP
– press and hold to set sleeping time.
≤ B
– to switch the system on or to standby mode.
Notes for remote control:
– While the system is in active mode,
select the source you wish to control by
pressing SOURCE key on the remote
control.
– Then select the desired function (for
example É , í , ë ).
pg 001-024/MME110/37-Eng 6/3/02, 12:49 PM12