User guide

17
English
8240 009 34241
Tape Operation / Recording
Tape playback
1 Select TAPE source.
➜ The display shows “TAPE” throughout tape
operation.
2 Press 70 to open the tape door.
3 Insert a recorded tape and close the tape door.
● Load the tape with the open side downward and
the full spool to the left.
4 Press É to start playback.
5 To interrupt playback, press Å. To resume
playback, press this key again.
6 By pressing à or á on the system, fast winding
of tape is possible in both directions.
7 To stop the tape, press 70.
● The keys are automatically released at the end of
the tape, except if Å has been activated.
General information on
recording
● For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suited for recording on
METAL (IEC IV) type tapes.
● The best recording level is set automatically.
Altering the VOLUME, DSC or DBB will not
affect the recording in progress.
● At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
● To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for recording
1 Select TAPE source.
2 Load a recordable tape into tape deck with full
spool to the left.
3 Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
● It is not possible to listen to another source.
● It is not possible to activate the timer function.
To stop recording
● Press 70.
To interrupt recording
● Press Å.
● To resume recording, press Å again.
MME-110 MICRO HIFI STEREO SYSTEM
FULL AUTO STOP
pg 001-024/MME110/37-Eng 6/3/02, 12:50 PM17