User Manual SMART. VERY SMART.
English México Es necesario que lea cuidadosamente su instructivo de manejo. Descriptión: Modelo: Alimentacón: Consumo: Importador: Domicilio: Localidad y Tel.: Exportador: País de Origen: Reproductor de Disco de Video Digital MRD100 110~127V/220~240V; 50~60Hz 35W Philips Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando, La Herradura Huixquilucan, Edo de Mexico C.P. 52784, Mexico Tel. 52 69 90 00 Philips Electronics HK, Ltd.
Type Wave length Output Power Beam divergence Semiconductor laser GaAIAs 650 - 660 nm (DVD) 784 - 796 nm (CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degrees English LASER Manufactured under license from Dolby Laboratories, “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. CAUTION ‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
Language Code English 4
Español ---------------------------------- 44 Español B. Português ---------------------------- 82 B.
Table of contents English General General Information ........................................................................................................ 8 Setup precautions.................................................................................................................................................8 Accessories supplied ...........................................................................................................................................8 Cleaning discs .........
Other playback features ..................................................................................................................................27 Using the Disc Menu ..................................................................................................................................27 Using the Title Menu ................................................................................................................................. 28 Viewing playback information ...................
General Information English CAUTION! The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Setup precautions Finding a suitable location – Place the set on a flat, hard and stable surface. Do not place the set on a carpet. – Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier). – Do not put anything under the set (e.g., CDs, magazines).
English Main Unit 1 2 3 4 5 6 7 8 a STANDBY ON 2 g Ç (STOP) – Turns on the system or turns off to standby mode. – Exits an operation. – DISC: stops playback or clears programed track. – TUNER: erase the current preset radio station. b Disc tray c OPEN/CLOSE ç – Opens/ closes the disc tray. h VOL – Adjusts the volume level. d System display panel e u (PLAY/PAUSE) – DISC: starts/pauses playback. – TUNER: starts auto tuner installation for first time setup.
Remote Control English c PLAY/PAUSE u 1 2 3 4 5 6 7 8 – DISC: starts/pause playback. d STOP Ç – Exits an operation. – DISC: stops playback or clears programed track. – TUNER: erase the current preset radio station. e DISC MENU – For DVD, enter or exit disc contents menu. – For VCD(2.0), enter digest menu. f TITLE – Access the title menu (if there is one). g VOLUME +– Adjusts the volume level. h MUTE – Mutes or restores the volume.
Remote Control (continued) English n OPEN/CLOSE ç – Open or close the disc tray. 14 o REW m / FFWD M – DISC: fast backward and forward search. – TUNER: tune the radio frequency down/ up. 15 16 p PREV í / NEXT ë – DISC: direct access the previous/next chapter or track. – TUNER: select a preset radio station. 17 18 19 q SETUP 20 – Enters or exits the system setup menu. r – DISC: selects movement direction in the menu. – TUNER: press left or right to select a preset radio station.
Remote Control (continued) English Using the remote control A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+-) inside the compartment. C Close the cover. D Point the remote control directly at the remote sensor (iR) on the front panel. E Select the source you wish to control by pressing the DISC, TUNER button on the remote control. F Then select the desired function (for example m, M).
English Basic Connections 2 1 1 3 4 Step 1: Placing the speakers This Home Theater System is simple to install. However, proper system placement is critical to ensure an optimum sound experience. A Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position. B Place the center speaker above the TV or 3 Helpful Hints: – The placement diagram shown here is only a guideline that will provide great system performance.
Basic Connections (continued) English FRONT RIGHT FRONT LEFT CENTER SUBWOOFER REAR RIGHT REAR LEFT Step 2: Connecting the speakers and subwoofer Connect all the speakers and subwoofer to the speaker jacks at the rear of the DVD system. Make sure that the colors of the plugs and jacks are matched. Helpful Hint: – To prevent unwanted noise, do not place the rear speakers too close to the DVD system, AC power adapter, TV or any other radiation sources.
English Basic Connections (continued) Option 1 Step 3: Connecting to TV This connection enables you to view the playback from this DVD system. You only need to choose one of the options below to make your video connection. – For a standard TV, follow option 1. – For a progressive scan TV, follow option 2.
Basic Connections (continued) English fix the claw into the slot AM loop antenna Option 2 FM wire antenna Option 2: Connecting to a Progressive Scan TV or component video input The progressive scan video quality is only available when using Y Pb Pr connection and a progressive scan TV is required. It provides superior picture quality when watching DVD movies. A Follow option 1 to make the basic video connection.
English Basic Connections (continued) ~ AC MAINS Step 5: Connecting the power cord After everything is connected properly, plug the AC power cord into the power outlet. The LED on the DVD system will light up. Never make or change any connections with the power turned on. Helpful Hint: – Refer to the type plate at the rear or bottom of the product for identification and supply ratings. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
Optional Connections English DIGITAL OUT AUDIO OUT S-VIDEO IN SCART IN VIDEO IN 1 ~ AC MAINS VCR or Cable/ Satellite Box Connecting audio from an analog audio/video device You can connect the audio output from an analog audio/video device (e.g. VCR, Cable/Satellite Box) to this Home Theater Audio System in order to enjoy the multi-channel surround sound capabilities Use an audio cable (red/white) to connect the AUX IN jacks on this DVD system to the AUDIO OUT jacks on an analog audio/video device.
Step 1: Turning on the DVD system A Press STANDBY ON (2). B Press the SOURCE button on the front panel repeatedly to select : DISC ¤ FM ¤ AM .... English Getting Started Step 2: Finding the correct viewing channel Before you start ... Make sure you have completed all the necessary connections before proceeding. A Press SOURCE button until “DISC” appears on the display panel. B Turn on the TV and set it to the correct Or Press DISC, TUNER on the remote control. video-in channel.
Getting Started (continued) English Step 3: Setting language preferences The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual. On-screen display (OSD) language The OSD (On-Screen Display) language for this DVD system will remain as you have set it, regardless of the changes made to the DVD disc language. A In ‘DISC’ mode, press SETUP on the remote control. Î Use keys on the remote control to navigate in the menu.
Helpful Hints: – During DVD playback, you can switch the audio and subtitle languages by pressing the AUDIO and SUBTITLE buttons on the remote control. However, this does not change the default settings you have made here. – For some DVDs, the subtitle/audio/menu language can only be changed via the DVD disc menu. English Getting Started (continued) Step 4: Setting the TV Selecting the matching color system The color system of the DVD system, DVD and TV should match.
Getting Started (continued) English { PAL } Select this if the connected TV has the PAL color system. It will change the video signal of an NTSC disc and output it to PAL format. D Select one of the options and press OK to confirm. Follow the instructions shown on the TV to confirm the selection (if any). If a blank/distorted TV screen appears, wait for 15 seconds for the auto recovery. Setting the TV Display Set the aspect ratio of the DVD system according to the TV type you have connected.
English Getting Started (continued) Step 5: Setting up Progressive Scan feature (for Progressive Scan TV only) The progressive scan displays twice the number of frames per second than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. Before you start...
Getting Started (continued) English Step 6: Setting the speakers’ channels You can adjust the delay times (center and rear only) and volume level (center, rear and subwoofer) for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. Speakers delay time A In ‘DISC’ mode, press SETUP on the remote control. Î Use keys on the remote control to navigate in the menu. B Highlight Move to icon and press and press . .
Playable discs IMPORTANT! – If the inhibit icon ( ) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – Do not put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.
Disc Operations (continued) English Basic playback controls Pausing playback During playback, press u. To resume playback, press u again. Selecting another track/chapter Press í / ë or use the numeric keypad (0-9) to key in a track/chapter number. If the repeat track/chapter mode is active, press í will replay the same track/ chapter. Searching backward/forward Press m / M. While searching, press m / M repeatedly to increase the search speed. To resume normal playback, press u.
Programming disc tracks English Disc Operations (continued) Other playback features (for audio CDs and VCDs) You can play the contents of the disc in the order you want by programming the playing order of the tracks. Up to 99 tracks can be stored. A Stop playback, press PROGRAM on the remote control. “PROGRAM P00:00” will appear on the display panel. B Use the numeric keypad (0-9) to enter a valid track/chapter number. C Press OK to store the track. “FULL” will appear if you have programmed 99 tracks.
Disc Operations (continued) English Using the Title Menu Resuming playback from the last stopped point A While playing a DVD disc, press TITLE to display the title menu. B Use keys or numeric keypad (0-9) on the remote control to make your selection, then press OK to start playback. Helpful Hint: – Depending on the DVD disc, you may not be able to select the title menu. When play is stopped and the disc has not been ejected, Press u to resume playback from the last stopped point.
Changing sound track language This operation works only on DVDs with multiple soundtrack languages, you can change the language you want while playing a DVD. Press AUDIO repeatedly to select the available audio languages.
Disc Operations (continued) English During playback, you can; Press í / ë to playback previous/next track/file in the current folder. Press m / M to fast reverse/forward search for a music track. Press REPEAT repeatedly to access various play modes. D To stop playback, press STOP Ç. Playing MP3 music and JPEG pictures simultaneously You can create a musical slide show if the disc contains both the MP3 music and JPEG picture files. A Insert an MP3 disc that contains music and pictures.
DVD Setup Menu Options You can continue a number of operations directly via the multiple menu bars on the TV screen without interrupting the disc playback. The exception is when you enter (SETUP MENU), after which the playback will pause. IMPORTANT! – Some operations may be different or restricted, depending on the disc format. Refer to the jacket or case of the disc you are playing.
DVD Setup Menu Options (continued) English Accessing the DVD setup menu This DVD system setup is carried out via the TV, enabling you to customize the DVD system to suit your particular requirements. Picture Setup see page 33 GO TO PICTURE SETUP PAGE Sound Setup see page 34 SETUP OK GO TO SOUND SETUP PAGE A In ‘DISC’ mode, press SETUP on the remote control. The setup menu appears. B Highlight icon and press the setup menu. Playback will pause.
English DVD Setup Menu Options (continued) Picture Setup page (underlined options are the factory default settings) TV SHAPE The picture shape can be adjusted to fit your TV. { 4:3 PS } { 4:3 LB } { 16:9 } TV SYSTEM Selects the color system that matches the connected TV. It will enable playback of a different type of disc (PAL or NTSC disc) on this DVD system. { AUTO } { NTSC } { PAL } PROGRESSIVE – For a full-height picture with the sides trimmed.
DVD Setup Menu Options (continued) English Sound Setup Page (underlined options are the factory default settings) NIGHT MODE This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs will be enhanced to an audible level. This feature is only applicable for DVD video discs with Dolby Digital mode. { OFF } { ON } – Turns off night mode feature. Selects this to enjoy the surround sound with its full dynamic range. – Turns on night mode.
English DVD Setup Menu Options (continued) Feature Setup Page (underlined options are the factory default settings) PARENTAL PARENTAL PASSWORD _ _ _ _ Enter code MENU LANG DEFAULTS PLEASE ENTER PASSWORD This is to prohibit viewing of discs that had exceeded the limits you set. It works only on the DVDs with parental level assigned to the complete disc or to certain scenes on the disc. 1) Highlight { PARENTAL } and press .
Tuner Operations English IMPORTANT! Make sure the FM and AM antennas are connected. Tuning to radio stations A Press SOURCE repeatedly until “FM” Using auto install This feature is only applicable for first time radio station programming. You will be prompted to install the radio stations when you access the tuner mode. With one touch of button, all the available radio stations will be stored automatically. appears on the display panel (or press TUNER on the remote control).
Using automatic preset Use automatic presetting to store or reinstall all the preset radio stations. English Tuner Operations (continued) Selecting a preset radio station A Press TUNER to select “FM” or “AM” band. or í / ë keys to select a preset radio stations. The preset number followed by waveband and radio frequency will appear on the display panel. B Use Deleting a preset radio station A Press TUNER to select “FM” or “AM” band. B Press and hold PROGRAM until “AUTO” appears on the display panel.
Sound and Volume Controls English Selecting digital sound effects VOLUME Select a preset digital sound effect that matches your disc’s content or that optimizes the sound of the musical style you are playing. MUTE Press SOUND to select the available sound effect. SURROUND SOUND When playing movie discs or in TV mode, you can select: CONCERT, DRAMA, ACTION or SCI-FI. When playing music discs or while in TUNER or AUX/DI mode, you can select: CLASSIC, JAZZ, ROCK or DIGITAL.
Controlling ‘PHILIPS’ TV with the remote control This DVD system’s remote control enables you to control the basic functions of your ‘PHILIPS’ brand TV. English Other Features Dimming system’s display screen In any active mode, press DIM on the remote control to select desired brightness: HIGH, MID or LOW. HIGH is default setting. Setting the sleep timer The sleep timer enables the system to switch to standby mode automatically at a preset time.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these instructions, consult your dealer for help. Problem (General) Solution No power. – Check if the AC power cord is properly connected.
Problem (Playback) Solution The remote control does not function properly. – Select the source you want to play (for example, DISC or TUNER) before pressing the function button ( , m / M). – Reduce the distance between the remote control and the system. – Replace the batteries with new ones. – Point the remote control directly toward the IR sensor. – Check that the batteries are loaded correctly. The DVD system does not start playback. – Insert a readable disc with the playback side facing down.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. Bit Rate: The amount of data used to hold a given length of music; measured in kilobits per second, or kbps.
AMPLIFIER MAIN UNIT Output power: 100 W - Front : 15 W / channel - Rear: 15 W / channel - Center : 15 W RMS - Subwoofer: 25 W RMS Frequency Response: 20 Hz – 20 kHz / –3 dB Signal-to-Noise Ratio: > 60 dB (CCIR) Input Sensitivity - AUX In : 500 mV Power Supply Rating: 110–127 V / 220–240 V; 50-60 Hz Power Consumption: 35 W Dimensions: 360 x 48 x 339 (mm) (w x h x d) Weight: 2.18 kg TUNER Tuning Range: FM 87.
