Owner’s Manual Guide D’utilisation Manual del Usuario EN MRD410B/F7 Home Theater System FR ES INTRODUCTION CONNECTIONS PLAYBACK Read your Owner’s Manual first for quick tips that make using your Magnavox product more enjoyable. If you have read assistance, you may access our online help at http://www.funai-corp.com or call 1-800-605-8610 while with your product (and Model / Serial number) FUNCTION SETUP OTHERS © 2010 Funai Electric Co., Ltd.
INTRODUCTION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. Model No.: Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
INTRODUCTION CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. LASER SAFETY This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.
INTRODUCTION Contents INTRODUCTION Safety Instructions ........................................................................2 Supplied Accessories ...................................................................5 Trademark Information ...............................................................5 Features ............................................................................................6 Symbols Used in this Manual ....................................................6 Front Panel..........
INTRODUCTION Supplied Accessories Owner’s Manual Quick Sta rt Guide EN Remote Control × 1 Video cable FM wire 1 center, 2 front, (WPZ1520TM002/ antenna 2 rear speakers and (NC000UD) Batteries (AA, 1.5V x 2) WPZ152SCP003) (WX1E9000-081) 1 subwoofer Owner’s Manual (1VMN29273) Quick Start Guide (1VMN29274) Trademark Information HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
INTRODUCTION Features Blu-ray Disc You can enjoy Blu-ray Disc which is capable of storing five times more data than a conventional DVD. BD-Java With some BDs which support Java applications, you can enjoy the interactive functions such as games or interactive menus. Full high-definition video playback Watch movies in the highest picture quality available for your HDTV.
INTRODUCTION Front Panel 1 2 3 4* 5 6 7 8 9* 10 EN STANDBY/ON VOLUME OPEN/CLOSE PLAY STOP SD CARD SOURCE MP3 LINE-IN 12 11 (*) The unit can also be turned on by pressing these buttons. 1. 4. 5. 6. VOLUME K / L button • Press to adjust the volume. 8. STOP C button • Press to stop playback. 9. PLAY B button* • Press to start or resume playback. 10. SOURCE button • Press to switch the active source mode. 11. MP3 LINE-IN jack • Use to connect your portable audio player with 3.
INTRODUCTION Remote Control 9. 31 1 2 3 30* 29 28 10. 11. 12. 13. 4 5 6 27 7 26 8 25 9 24 10 23 11 12* 13 14 15 16 17 22 14. 15. 16. 21 20 19 18 17. 18. 19. (*) The unit can also be turned on by pressing these buttons. 1. STANDBY/ON Q button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) 2. DISPLAY button • Press to display the on-screen display menu. 3.
INTRODUCTION 2 Note Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. • Do not mix new and old batteries together. • Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages. • Make sure that the + and - ends of each battery match the indications in the battery compartment.
INTRODUCTION Front Panel Display 1 2 3 4 * Brightness of the display can be adjusted. Refer to “Panel Display” in “List of Setup Menus” on page 40. 1. 2. 3. 4. Displays repeat icon. (Appears during repeat playback.) Displays media mode icon (disc mode or SD card mode). Displays playback status icon. Refer to table A below. Displays source mode status (refer to table B below) or information such as title number, elapsed playing time, repeat type, menu type, etc.
CONNECTIONS Placing the Speakers Make the following connection to ensure an optimum sound experience. EN REAR LEFT FRON T LEFT CENT ER FRON T RIGHT INTRODUCTION SUB REAR RIGHT WOO FER 1 Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 CONNECTIONS degrees from the listening position. 2 Place the center speaker above the TV or the main unit so that the center channel’s sound is localized.
CONNECTIONS Better (Supports up to 1080i resolution.) COMPONENT VIDEO IN Y Your TV Video Go To PB/CB Component video cable PR/CR B No supplied cables are used in this connection: Please purchase the necessary cables at your local store. Basic (Supports only 480i resolution.) Your TV VIDEO IN Video Go To Video cable C • Connect this unit directly to the TV. If the video cables are connected to a VCR, pictures may be distorted due to the copy right protection system.
CONNECTIONS Component Video Connection B Your TV HDMI OUT AUDIO IN AUX DIGITAL COMPONENT VIDEO OUT AUDIO IN FM ANT 75Ω SPEAKERS(4Ω) Pr EN Y Pb SUBFRONT WOOFER CENTER REAR VIDEO OUT FRONT COMPONENT VIDEO IN Y PB/CB PR/CR Component video cable C Your TV HDMI OUT SPEAKERS(4Ω) AUDIO IN AUX FM ANT 75Ω INTRODUCTION Standard Video Connection DIGITAL COMPONENT VIDEO OUT AUDIO IN Pr Y Pb REAR FRONT VIDEO OUT Video cable CONNECTIONS SUBFRONT WOOFER CENTER VIDEO IN HDMI Mode and Act
CONNECTIONS Connecting Speakers and Subwoofer HDMI OUT SPEAKERS(4Ω) AUDIO IN AUX FM ANT 75Ω DIGITAL COMPONENT VIDEO OUT AUDIO IN Pr Y Pb SUBFRONT WOOFER CENTER REAR VIDEO OUT FRONT SPEAKERS(4Ω) SUBFRONT WOOFER CENTER SUBWOOFER FRONT CENTER REAR REAR RIGHT FRONT REAR LEFT FRONT RIGHT FRONT LEFT 1 Connect the speaker cables to the matching color sockets on the speakers. 2 Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit.
CONNECTIONS Connecting Audio from Cable Box/Recorder/Game Console or TV • This unit provides analog and digital audio connection. You can connect the audio output from an audio / video device (e.g. DVD Recorder, VCR, Cable / Satellite Box, game console or TV) to this Blu-ray Disc Home Theater in order to enjoy the multi-channel surround sound capabilities.
CONNECTIONS Connecting Portable Media Player STANDBY/ON VOLUME OPEN/CLOSE PLAY STOP SD CARD SOURCE MP3 LINE-IN MP3 LINE-IN MP3 Connect a 3.5mm stereo audio cable(not supplied) to the MP3 LINE-IN jack on this unit and the headphone jack on your portable media player. No supplied cables are used in this connection: Please purchase the necessary cables at your local store. Note • To playback the audio from your portable media player, refer to “Play from Portable Media Player” on page 34.
CONNECTIONS After you have completed all the connections, you must find the correct video channel (external input channel) on your TV. Finding the Video Channel on Your TV 1 2 3 After you have made all the necessary connections, press [STANDBY/ON Q] to turn on the unit. EN Turn on your TV. Press the button on the TV’s remote control that accesses the external input channel. It may be labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user manual).
PLAYBACK Information on Playback Before you start playing back a disc, read the following information. Playable Discs and Files Note for SD Memory Cards This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back.
PLAYBACK Color Systems On-Screen Display BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system. You cannot play back the disc recorded in other color systems. You can check information about the current disc by pressing [DISPLAY].
PLAYBACK Chapter information Disc information
1 2 1 1/10 3 4 2 1 2 3 4 5 6 6 3/5 0 : 01 : 02 3/5 0 : 01 : 02 0 : 00: 51 T Current track number / Total number of tracks Elapsed time (or remaining time) of the current disc 1 File_name_001 1 Media icon and file name : MP3 files : WMA files : JPEG file Tag information Title information 2 1 / 14 File name information Current title number Current chapter number / Total nPLAYBACK 2 How to Insert a Disc 1 2 Press [OPEN/CLOSE A] to open the disc tray. Media Select • Media filter screen will appear. • When the SD Memory Card contains only one type of file, skip to step 4. 3 Picture Use [K / L] to select a desired track, folder or file, then press [OK]. Use [s / B] to go back and forward between the hierarchies. • If you press [OK] on the desired file, playback will start. If no disc is in operation, “Media Select” screen will appear on the TV screen.
PLAYBACK Selecting the Media Mode For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted and this unit is in Disc / SD card mode. 1 2 In stop mode, press [SETUP]. Use [K / L] to select [OK] .
PLAYBACK Playing Back a BD or a DVD efore ou egin Press [STANDBY/ON Q]. EN Turn on the TV and select the appropriate input on the TV to which the unit is connected. Insert a disc (refer to “How to Insert a Disc” on page 21 ). Playback may start automatically. If not, press [B (play)]. Some discs may show a title or a disc menu. In such case, refer to “Using the Title / Disc / Pop-up Menu” on page 24.
PLAYBACK Using the Title / Disc / Pop-up Menu Many of BD-video and DVD-video discs contain title menu (BD-video / DVD-video), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Title menu (BD-video / DVD-video) 1 Press [TOP MENU]. 2 Use [K / L / s / B] to select an item, then press 3 [OK]. Press [TOP MENU] to exit. Disc menu (DVD-video) 1 Press [POP MENU / MENU].
PLAYBACK Icons: Kodak Picture CD : Folder : audio CD tracks : MP3 files : WMA files This unit can also run JPEG files stored on Kodak Picture CD. You can enjoy picture images on the TV set by playing back the Kodak Picture CD. This unit conforms to ver.7.0 of Kodak Picture CD. For details of Kodak Picture CD, contact a shop that provides developing service of Kodak Inc. 1 : JPEG files 1 Press [C (stop)] to stop playback.
PLAYBACK Tips for JPEG / Kodak Picture CD Playback • The selected file will be played back and go to the next file in the current hierarchy in turn every 10 seconds. • Every press on [ANGLE] will turn the image clockwise by 90 degrees when an image is displayed. • To change the visual effect for switching the playback image, press [MODE] once, then use [s / B] or [OK] to switch between “Cut In/Out” and “Fade In/Out”.
PLAYBACK 3 Press [B (play)] to start program playback. Program Playback • The program playback will start. You can play back the disc/card in your desired order. 2 / 16 1 In stop mode, press [MODE]. 2 Use [K / L] to select a track / folder / file, then 2 4 9 11 12 14 8 press [OK].
PLAYBACK Random Playback Adjusting the Picture This function shuffles the playback order of tracks / files. You can adjust the picture quality. 1 In stop mode, press [MODE] twice. 1 During playback, press [MODE] repeatedly 1 2 3 4 5 6 2 - - / 16 Random CD_DA 1 2 3 4 5 6 7 Total 1 : 13 : 29 Black Level Noise Reduction 0:36 1:14 0:45 0:50 0:53 0:20 0:54 Black level Page Down e.g.
PLAYBACK PIP (BONUSVIEW) Setting Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video. Camera Angle Some BD-video and DVD-video contain scenes which have been shot simultaneously from various angles. You can change the camera angle when appears on the TV screen. EN 1 During playback, press [ANGLE].
PLAYBACK Using [the Number buttons] (Direct Search) Search Using [H / G (skip)] 1 During playback, press [G (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [H (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEG files, press [H (skip)] to go back to the previous file. Note • For BD and DVD, if title contains no chapters, [H / G (skip)] changes the title.
PLAYBACK You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback.
PLAYBACK Note • The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set to “HD Audio Output”. (For some BD, secondary audio will be output even when secondary video is off.) • The sound mode cannot be changed during playback of discs not recorded in multiple audio. • Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the discs. Refer to the manual accompanying the disc.
PLAYBACK Volume Control You can control the volume level of the audio output from 5.1ch speakers. To increase or decrease the volume level : Press [VOL. + / –]. • The volume level will increase or decrease, every time you press [VOL. +] or [VOL. –]. • The volume level will be displayed on the front panel display. To turn off the volume temporarily : Press [MUTE]. • To restore the volume, press [MUTE] again or press [VOL. + / –]. • “MUTE” will be displayed on the front panel display.
PLAYBACK Switching Active Source Mode You can change the active source mode to the desired external audio inputs and enjoy audio from the connected device with the multi-channel surround sound capabilities. 1 Press [SOURCE ⴐ / ⴑ] . • “Input Select” screen will appear. 2 Use [K / L] to select the desired source mode, then press [OK]. “Disc / SD”: Set the active source mode back to this unit. “Aux”: Set the active source mode to the AUDIO IN(AUX) jacks.
PLAYBACK Radio Operations Guide to the FM Radio Screen 1 By connecting the supplied FM wire antenna, you can listen to FM radio on this unit. FM Presetting Radio Stations 4 Press [s / B]. Note • While auto tuning, audio will be muted until this unit finds a radio station with sufficient signal strength. 1 Follow steps 1) to 2) in “Presetting Radio Stations” 2 Note 6 Stereo EN FM Received -- 105.00MHz + 0.1MHz gng + - 0.1MHz TuningTuning+ Prev 1 2 3 4 5 6 7 8 Next 08 09 10 11 12 13 14 100.
FUNCTION SETUP In the setup menu screen, you can access various kinds of menus, and customize them as you prefer. To call up the setup menu screen, press [SETUP]. Then follow the instructions below to navigate through the screen. < Setup menu screen > 1 Quick 2 1 2 3 Media Select Disc Audio Output Speakers HDMI Video Resolution Auto Component Output 480i Player Menu English 4 3 4 Quick menu Contains only the frequently used menus. Custom menu Contains all the available setup menus.
FUNCTION SETUP Category Language Auto (XXX) English Français Español Component Output* Reduces the posterization effect of the playback picture. “Auto”: Reduces the posterization effect by automatically outputting up to 36 bit color whenever the unit recognizes the connected display device supports Deep Color feature. “Off”: Outputs the standard 24 bit color. Sets resolution for component output picture.
FUNCTION SETUP Category Menus / Options Still Mode Auto Field Frame Custom Video Description Adjusts picture resolution and quality in still mode. “Auto”: Automatically selects the best resolution setting (“Frame” or “Field”) based on the data characteristics of the pictures. “Field”: Stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data. Select “Field” when the pictures are still unstable even if “Auto” is selected.
FUNCTION SETUP Category Audio Menus / Options BD Audio Mode Custom Center 0~7 Width Dimension -3~3 On Off Test Tone Off Manual Auto 39 OTHERS “Off”: Deactivates the Test Tone. “Manual”: Allows you to manually select the speaker to test. “Auto”: Automatically tests all speakers. • To stop the test tone, press [RETURN]. Front Lch default is 0 Sets the volume level for each Center default is 0 speaker to get ideal audio balance.
FUNCTION SETUP Category Audio Menus / Options Delay Time Speaker Setup • This is a parameter • This feature is for optimizing the available only when “Audio Output” is set timing at which the sound outputs from to “Speakers”. the speakers (Refer to page 42.) according to the distance from the listening position. Distance Description Feet Meters Front Center Surround Feet : 0 ~ 15 Meters : 0 ~ 4.5 Default DRC Custom Password input field Parental • Refer to page 44 for more information.
FUNCTION SETUP Category Initialize No Yes Format SD No Card Yes Erase Saved No BD-ROM Yes Data (Player) Erase Saved No BD-ROM Yes Data (SD Card) Menus / Options Setup Description Resets all the settings, except for “Parental” to the factory default. Re-formats SD card. • Refer to page 45 for more information. Re-formats local storage (Player) used for BD-Java. EN Re-formats local storage (SD card) used for BD-Java.
FUNCTION SETUP TV Aspect A “Custom” [SETUP] A A “TV Aspect” “Video” Use this feature to adjust the aspect ratio of the video source which is different from your TV’s ratio to fit your TV monitor without distorting the picture. Descriptions of each setting are as follows: Video source Your TV 4:3 Option 4:3 Letter Box Description To enjoy 16:9 picture on 4:3 monitor: 16:9 picture is scaled down until both sides of the picture fits the 4:3 TV.
FUNCTION SETUP “Audio Output” setting A “BD Audio Mode” setting A Media ª Audio Source ª DTS® BD-video DTS-HD® Dolby Digital DTS® LPCM Analog audio FM Analog audio FUNCTION SETUP External audio input (AUX / MP3 LINE-IN) PLAYBACK External audio input (DIGITAL AUDIO IN) EN CONNECTIONS Dolby Digital DTS® LPCM DTS-CD DTS® Audio CD PCM MP3 MP3 Windows Media™ Audio WMA DVD-video “HDMI LPCM” INTRODUCTION LPCM “HDMI Normal” “HD Audio “Mix Audio “HD Audio “Mix Audio Output” Output” Output” Outpu
FUNCTION SETUP Parental [SETUP] fun-Link(HDMI CEC) A “Custom” A “Parental” Some BD-videos or DVD-videos feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will play back. This feature prevents your children from viewing inappropriate material. 1 Use [K / L] to select “ 2 3 4 ”, then press [OK]. • Password input field appears. If a password has not been set, follow A).
FUNCTION SETUP Software Update Initialize Initialize the setting or SD Memory Card. Current Version You can confirm the current software version. 1 2 3 4 5 6 In stop mode, press [SETUP]. Use [K / L] to select , then press [OK]. Use [K / L] to select 1 In stop mode, press [SETUP]. 2 Use [K / L] to select , then press [OK]. 3 Use [K / L] to select a desired option, then press [OK]. , then press [OK]. Note • Please visit www.magnavox.com to download the latest software version.
OTHERS Troubleshooting If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem No power No sound or picture - No audio / video signal on the display device via HDMI cable - Distorted picture - Completely distorted picture or black / white picture with BD / DVD No sound or distorted sound No audio signal from the loudspeakers of the TV connected via an HDMI cable No audio from the speaker system No 5.
OTHERS Problem The unit does not respond to some operating commands during playback The unit cannot read BD / DVD/ CD Angle does not switch Playback does not start when the title is selected The password for rating level has been forgotten Radio reception is poor Solution - Operations may not be permitted by the disc. Refer to the instructions of the disc. - Condensation? (Let sit 1 or 2 hours) - You are attempting to playback a disc other than one with one of the Logos on page 18.
OTHERS Dolby Digital Region Code The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo (2ch) or multichannel audio. Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).
OTHERS Language Code List C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech [CZE] Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 F-H Faroese Fiji Finnish [FIN] 5261 5256 5255 Language Code Language Code French [FRE] Frisian Galician Georgian German [GER] Greek [GRE] Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian [HUN] 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 5455 5467 Macedonian Malagasy Malay Mal
OTHERS Specifications Signal system Power requirements Power consumption Total output power (Amplifier) Dimensions (width x height x depth) Weight Operating temperature Operating humidity General NTSC Color 120 V AC, 60 Hz 70 W (standby: 0.6 W) Home theater mode: 1000 W FTC* output power : 700 W *(Main Ch @ 1 kHz within 10% THD, Sub Ch 60 Hz within 2.5% THD) 17.2 x 2.4 x 11.7 inches (435 x 59 x 297 mm) Total weight: 27.56 lbs. (12.50 kg) Main unit: 8.16 lbs. (3.
OTHERS Maintenance Servicing • Please refer to relevant topics on “Troubleshooting” on page 46 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please contact 1-800-605-8610 or visit : www.magnavox.
LIMITED WARRANTY LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.