User Manual S M A RT. V E RY S M A RT. MRV660 DVD RECORDER Magnavox vous remercie de votre confiance. Thank you for choosing Magnavox. Gracias por escoger Magnavox Besoin d'une aide Make your own DVD rapide? Necesita ayuda inmediata? Need help fast? Read your Quick Use Guide and/or Owner's Manual first for quick tips that make using your Magnavox product more enjoyable.
Return your Product Registration Card today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure: *Proof of Purchase *Product Safety Notification Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 12. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning 6. Clean only with dry cloth.
Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Class B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada.
Special Functions Using the ‘Digital Photo Manager’, you can view and modify JPEG pictures from a Picture CD, DVD, or a CD ROM. You can create slide shows and play them on a DVD player. This feature is only available for DVD+RW only. By holding down the REC button, the recording will be made at the end of all other recordings. This helps to avoid overwriting previous recordings. This connection is also known as 'FireWire' and 'IEEE 1394.
Table of Contents English Special Functions ................................... 5 Front Panel ................................................. 23 Jacks behind the flap .................................... 23 Care and Safety Information Setup .............................................................. 8 Cleaning discs ............................................... 8 About recycling ........................................... 8 General Information Introduction ........................................
Recording System Menu - Preferences Discs for recording ................................... 37 Recording settings ..................................... 37 Accessing the Preferences options ....... 53 Recording mode ........................................... 38 Recording language ...................................... 38 Inserting chapter markers .......................... 38 Filter mode ..................................................... 39 Manual recording .................................
Care and Safety Information English CAUTION! High voltage! Do not open. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Setup Finding a suitable location – Place the set on a flat, hard and stable surface. Do not place the set on a carpet. – Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier). – Do not put anything under the set (e.g.
Introduction Accessories supplied Your DVD recorder allows you to record the TV programs or duplicate camcorder recordings to a DVD+RW or DVD+R and play pre-recorded DVDs. The recordings you make on the Recorder will play on some DVD players and DVDROM drives. The DVD+R discs have to be finalized before they can be played on other DVD players. – – – – Please take the time to read this user manual before using your DVD recorder. It contains important information and notes regarding operation.
Connecting to TV English General The necessary cable connections must be made before you can record or playback TV programs using your DVD recorder. Setting the TV to the correct video in channel 1 Press STANDBY-ON 2 on the DVD recorder to turn it on. 2 Turn on the TV and set it to the correct Selecting a suitable connection to your TV When you install your DVD recorder for the first time, select one of the following options to connect the DVD recorder and your TV.
Connecting to TV (cont’d) English Option 1: Using Y Pb Pr jacks Antenna or Satellite/Cable TV signal 1 2 4 3 5 The Component Video (Y Pb Pr) method of transmitting pictures produces the highest quality as the video signal is split into its Y (brightness), Pb and Pr (blue minus brightness, red minus brightness) components. The signals are transmitted via separate cables. The cables and the associated jacks are mostly colored red, green and blue.
Connecting to TV (cont’d) English IMPORTANT! – The progressive scan video quality is only available through Y Pb Pr connection and a progressive TV is required. Turn on the progressive scan feature after complete the first installation (see page 24.) – Before enabling the progressive scan function, you must ensure that your TV progressive scan function is turned on (refer to your TV owner’s manual.
Connecting to TV (cont’d) English Option 2 : Using S-Video (Y/C) jack Antenna or Satellite/Cable TV signal 1 2 4 3 5 This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and color signal (C signal) separately. This mini DIN jack is also called a Hosiden jack.
Connecting to TV (cont’d) English Option 3 : Using Video (CVBS) jack Antenna or Satellite/Cable TV signal 1 2 4 3 5 This cable, usually featuring yellow cinch plugs, is used for transmitting the Composite Video signal (FBAS, CVBS.) In this method of transmission, the color signal and the brightness signal are transmitted on the same cable.
Connecting to TV (cont’d) Antenna or Satellite/Cable TV signal 1 English Option 4 : Using Antenna jacks only TV 2 3 Use this connection only if your TV set has a single Antenna In jack and does not have any audio/video jacks. For this type of connection, you need to set the channel of the TV set to follow that of the DVD recorder. Have the following cable ready: 1) Antenna cable 1 Turn off your TV and remove the antenna cable from your TV (or Satellite Receiver/Cable Box.
Connecting to Additional Devices English Using the input sockets (IN-EXT 1 or IN-EXT2) Connecting a Satellite Receiver/ Cable Box 1 If your Satellite Receiver/Cable Box has only a single antenna output (RF OUT or TO TV,) use the antenna cable to connect it with the ANTENNA input jack at the back of the DVD recorder. You can connect a video cassette recorder (VCR,) DVD player, decoder, satellite receiver or cable box to the input jacks at the back of the DVD recorder (IN-EXT 1 or IN-EXT 2.
Connecting a VCR/DVD player You will need this connection if you want to record the video tapes or discs to a DVD+R(W)s. Option 1 1 Use a component video cable (red/green/ blue) to connect the DVD recorder’s COMPONENT VIDEO (IN-EXT1) input jacks to the corresponding component video output jacks on the VCR/DVD player.
Connecting Additional Devices (cont’d) English Connecting a camcorder to the front jacks S-VIDEO OUT DV OUT VIDEO OUT AUDIO OUT L 1 2 R OR You can use the front jacks to copy camcorder recordings. Option 1: Using DV IN jack Use this connection if you have a Digital Video or Digital 8 camcorder. The DV jack will conforms to the i.LINK standard. It provides the best picture quality. ● Use an i.
Connecting to Additional Devices (cont’d) STEREO Using digital audio output jacks English Using analog audio output jacks AUDIO IN COAXIAL DIGITAL IN L R You can connect the DVD recorder to a two channel stereo system or receiver in order to enjoy the stereo sound system.
Remote Control English 3 Alphanumeric keypad 1 2 – Enter numbers or letters in appropriate entry fields. – Select a chapter/track number to play. – Select a TV channel while in internal tuner mode. 4 TIMER 3 4 5 6 7 8 9 0 ! @ # – Access or exit the timer recording menu. 5∞ § – Skip to previous or next Chapter/Track. – Holding down the button for fast reverse or fast forward function. 6 RECORD 0 – Start recording the current TV channel or the current video input source. 7 PLAY 2 – Play a disc.
Remote Control (cont’d) English $ TV/DVD – Switch between the DVD recorder and the antenna signal. This function operates when the DVD recorder is connected to the TV with only an antenna cable. $ % T/C (Title/Chapter) – Select a 'T'(title)/'C'(chapter) directly on the menu bar. ^ STOP 9 – Stop playback/recording. – Holding down the button will open and close the disc tray.
Remote Control (cont’d) English Inserting Batteries Using the remote control to operate the system 1 Aim the remote control 3 directly at the remote sensor (iR) on the front panel. 1 2 2 Select the source you 1 Open the battery compartment. 2 Insert two batteries type R03 or AAA, following the indications (+-) inside the compartment. 3 Close the cover. Caution! – Remove batteries if they are exhausted or if the remote is not to be used for a long time.
1 2 3 4 56 7 0! @ 89 # 1 STANDBY-ON 2 0 S-VIDEO – Turn on or off the DVD recorder. 2 Disc tray – S-video input for SVHS/Hi8 camcorders or SVHS/Hi8 video recorders (input channel number 'CAM 1'.) 3 OPEN/CLOSE ç ! VIDEO – Open or close the disc tray. 4 Display panel – Show information about the current status of the DVD recorder. – Video input for camcorders or video recorders (input channel number 'CAM 1'.) @ L/R AUDIO – Play a disc.
Installing the DVD Recorder 6 Press 4 to select { Done } and press OK English First Installation The First Installation menu will appear the very first time you turn on the DVD recorder. These settings will help you set up the basic DVD recorder features easily, including TV channels and language options. IMPORTANT! – You have to turn on your TV and select the correct Video In channel to see the First Installation menu.
CHANNEL SEARCH Automatic channel search will find and store all channels. Make sure to connect the antenna. Search channels Start Skip Search Note: Make sure you have successfully made all the required connections to the DVD recorder, the TV and Satellite Receiver/Cable Box (if any) and switched them on. The automatic channel search will detect the signals and save all the available program channels.
Installing the DVD Recorder (cont’d) English TV channel programming Although the DVD recorder selects available TV channels during first installation, you may want to repeat the process later if more channels become available in your area or if you are reinstalling the DVD recorder. Setting favorite TV channels You can set your favorite TV channels for quick access by using the channel up/ down button on the remote control. 1 Press SYSTEM-MENU. ➜ The system menu appears on the TV.
Installing the DVD Recorder (cont’d) English Selecting the channel input signal The DVD recorder will detect whether you connected an Antenna or Cable TV signal. If you are not receiving the correct channels, you can use this function to select the type of connection you are using and allow the DVD recorder to reset the channels. 1 Press SYSTEM-MENU. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up .} 3 Press 2 repeatedly to select { Analog Ch.
Installing the DVD Recorder (cont’d) English Setting the time and date Manual time/date settings If the DVD recorder has not set the time and date correctly, set the clock manually by following the steps below. Manual clock setting overrides automatic clock setting. 1 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on the TV. 2 Press 4 repeatedly to select { Set-up .} 3 Press 2 repeatedly to select { Time-date .} 1 Select { Smart Clock } and press 2 to confirm.
Setting the language You can select the language for subtitles and audio for DVD playback. For some DVDs, the subtitle/audio language can only be changed via the DVD disc menu. If the selected language is not available on the disc, the disc’s default setting language will be used instead. Helpful Hint: – For bilingual TV programs, you can switch between stereo (original) and additional language (SAP) for recording. See page 38 “Recording - Recording language.
Playback English Playable discs Using this DVD Recorder, you can play and record on the following discs: Recording and Playback DVD+RW (DVD ‘plus’ Rewritable;) can be recorded on over and over. DVD+R (DVD ‘plus’ Recordable;) can be recorded only once. Playback only: DVD Video (Digital Versatile Disc) IMPORTANT! – If the inhibit icon (error) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.
Starting disc playback ● If a dialog appears on the TV showing : { Do you want to access the disc content? } ➜ Select { Yes } to show the disc content menu (see page 49’ “Browsing the discs”.) ➜ Select { No } to switch to the last active mode. ➜ If you want to remove this dialog for the next playback, you have to enable the { Auto play } function (see page 54.
Playback (cont’d) English Playing a DVD+R(W) disc Playing a picture disc (slide show) You can display JPEG pictures in the selected roll automatically one after the other at adjustable intervals. 1 Insert a DVD+RW or DVD+R disc. 2 If the disc content menu appears on the TV Use 1 2 3 4 to navigate within the menu and select a title to play, then press PLAY 2. 3 To stop playback, press STOP 9.
Additional Playback Features 1 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on the TV. 2 At { Toolbar ,} press 2 to select STOP Options 2 Press 3 4 to change the digit and press 2 to go to the next digit field. Toolbar ● You may also use the alphanumeric keypad 0-9 to enter the correct digit directly. Subtitle Audio Angle Zoom Time search [PLAY] [EDIT] [OK] = PLAY Audio 1 Press 4 to select { Time search } and press 2 to enter the time field.
Additional Playback Features (cont’d) English Changing audio soundtrack language This operation works only on DVDs with multiple soundtrack language or VCDs with multiple audio channel. This function can also be accessed via the Red button on the remote control. 1 Press 4 to select { Audio } and press 2 to enter its options. 2 For DVD, press 4 repeatedly until the audio language you want is selected, then press 1 to confirm. ➜ The languages may be numbered or abbreviated, such as “En” for English.
Changing to another title/ chapter/track Searching forwards/ backwards When a disc contains more than one track, title or chapter, you can change to a different track, title or chapter as follows. You can fast forward or fast reverse a disc at four, eight or thirty two times normal playback speed. During playback, ● Press § to go to the next title/chapter/ track. ● Press ∞ to return to the start of the current title/chapter/track.
Additional Playback Features (cont’d) English Selecting various play mode Repeat play You can select a Chapter, Track, Title or the entire disc for repeat playback. 1 Press Yellow button { REPEAT } repeatedly on the remote control to select one of the repeat options. ➜ Repeat chapter (DVD, DVD+R[W] only) ➜ Repeat track/title ➜ Repeat album/playlist (if applicable) ➜ Repeat entire disc (video CD, audio CD, DVD+R[W] only) ➜ Repeat off 2 To cancel repeat playback, select Repeat off or press STOP 9.
Discs for recording Two different formats of DVD recordable discs can be used with this DVD recorder: DVD+RW (DVD ‘plus’ Rewritable) – Discs are re-writable can be used for multiple recordings once existing data is erased. – To prevent accidental loss of recordings, when you starting recording, hold down the RECORD button until ‘SAFE RECORD’ message appears.
Recording (cont’d) English Recording mode The recording mode defines the picture quality of recordings and the maximum recording time for a disc. During playback, the correct picture quality will automatically be selected. This function can also be accessed via the REC MODE button on the remote control. 1 Press 4 to select { Record mode } and press 2 to enter its options.
Filter mode Manual recording For long play or extended play recording, you can select a suitable filter mode to optimize the video recording. The setting does not influence high quality or standard play recording mode. Use the 'Manual recording' function to start recording immediately (e.g., to record a TV show already in progress.) 1 Press 4 to select { Filter } and press 2 to enter its options. 2 Press 2 to select one of the options.
Recording (cont’d) English 5 For recording from external device, you have to first start play on the external device. Manual recording with automatic turn-off (One Touch Recording) ● While recording in progress, you can press OK to insert a chapter marker wherever necessary. 1 Follow the steps 1~3 of “Manual 6 To stop the recording, press STOP 9.
Introduction Programming recordings Use 'Timer Recording’ to automatically start and stop a recording at a later date/ time. The DVD recorder will tune to the right program number and begin recording at the specified time. With this DVD recorder, you can preprogram up to six recordings within a period of 15 days. – – – – To make a programmed recording, your DVD recorder needs to know: The date you want to make the recording. The program number of the TV channel. The start and end time of the recording.
Timer Recording (cont’d) English { Repeat } – Select {Weekly}, {Once} or {Mo.-Fr.} (Monday to Friday) recordings and press OK to confirm. { Record mode } – Select a record mode and press OK to confirm. See pages 37~38 “Recording settings - Recording mode”.) ● To clear the timer entries, press the matching color coded button on the remote control to select { Clear all } ➜ All the settings in the timer menu are cleared.
Changing a programmed recording 1 Turn on the TV power. Select the correct Video In channel at the TV. ➜ The timer overview appears. TIMER 11.55 PM Stop time 12:26 PM Date 06-30-2004 Channel CH001 Once Record Mode M1 2 Press TIMER on the remote control. ➜ The timer overview appears. 3 Press 3 4 to select a timer program which you want to delete. 11:56 PM Repeat 1 Turn on the TV power. Select the correct Video In channel at the TV. 2 Press TIMER on the remote control.
Editing/Finalizing Recording English About editing You can change disc contents and settings for a recorded DVD+RW or unfinalized DVD+R from the edit menu screen. Photo editing is limited to edit the information on a roll or album. These editing changes are available for the DVD recorder, but may not be accessible when you play the disc on other DVD player.
Changing the disc/title name 1 Insert a recorded DVD+RW or an unfinalized DVD+R. ➜ The Index Picture screen or disc content menu appears on the TV. 2 Press EDIT on the remote control. ➜ The edit menu appears. 3 Press 3 4 to select { Disc name } or { Title name } in the menu. 4 Press 3 4 to change the character/ number or make an entry by using the alphanumeric keypad 0-9. ➜ Press 1 2 to move to the previous or next field. 5 Press OK to confirm the changes. ➜ The info panel is now updated.
Editing/Finalizing Recording (cont’d) English Video editing In the edit video mode, the entire recording will be played back regardless of whether they are hidden or not. 1 Insert a recorded DVD+RW or an unfinalized DVD+R. ➜ The Index Picture screen appears on the TV. 2 Press 3 4 to select a recording. 3 Press EDIT on the remote control. ➜ The edit menu appears. 4 Press 3 4 to select { Video edit } in the menu and press OK to confirm. ➜ The video edit menu appears.
Editing/Finalising Recording (cont’d) 1 Start playback a recorded DVD+RW or an unfinalized DVD+R. 2 Press EDIT on the remote control. 3 Press the matching color coded button on the remote control to select { Chapter } ➜ The chapter editing menu appears. Editing title (divide/append/Index picture) English Editing chapter (merge/split/hide) 1 Start playback a recorded DVD+RW or an unfinalized DVD+R. 2 Press EDIT on the remote control.
Editing/Finalising Recording (cont’d) English { Append } - for DVD+RW only – Select this to append record to the existing recording from the position of the playback. Continue steps 5~7. For append recording only: 5 Press 3 4 to select the input channel to append : { preset program number }, { EXT1 }, { EXT 2 } or { CAM1 .} 6 Press RECORD 0 to start append recording. Warning! Once the recording started, any prior recording from the point of the playback onwards will be overwritten.
Browsing the disc You can view and manage possible contents within your discs by using an on-screen console called the Media Browser. 1 Insert a disc into the DVD recorder. REC MODE ➜ The Index Picture screen or disc content menu appears on the TV.
Using the Browser (cont’d) English Browsing the picture disc 06/06/2004 DVD / Photo / Rolls / Roll KYZ The Media Browser allows you to view the JPEG pictures discs or playback as a slide show or store them in an album. JPEG Photo can handle up to 100 photos in one album on a DVD+RW or DVD+R from this DVD recorder, depends on the JPEG file parameters. The supported functions are shown at the bottom of the disc content menu via the color coded buttons on the remote control.
Changing the picture order within an album You can re-arrange the picture position in the album in order to create the desired order of the slide show. The order of the pictures in the photo roll remains unchanged. 1 Press BROWSER on the remote control. ➜ The disc content menu appears. 2 Press 1 2 to select photo album menu and press 3 4 to select a desired photo album folder. 5 Press the matching color button on the remote control to select { Move }.
Using the Browser (cont’d) English Changing the slide show settings You can adjust the various slide show settings to your individual needs. 1 Press BROWSER on the remote control. ➜ The disc content menu appears. 2 Press 1 2 to select photo roll/album menu and press 3 4 to select a desired photo roll/album folder. 3 Press PLAY 2 to start slide show play. Album 001/Photo 001 [PAUSE] [EDIT] [RETURN] [STOP] [BROWSER] Zoom Repeat Speed Up Speed Down { Zoom } – Select this to activate zoom mode.
System Menu - Preferences 1 Switch on the TV set. Select the correct Video In channel at the TV. 2 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on TV. 3 Press 4 to select { Preferences .} Recording For more information on this menu, please see pages 37~39 “Recording settings.
System Menu - Preferences (cont’d) English Disc DVD-VIDEO-TITLE 04|CO1 STOP Disc Preferences Access For more information on this menu, please see pages 58~60 “Setting Access Control.” Adapt menu Delete all Features DVD-VIDEO-TITLE 04|CO1 STOP Features Preferences { Adapt menu } If a DVD+RW has been recorded in a computer drive or in another DVD recorder, the Picture Index screen may not be displayed correctly. This feature allows you to change the format supported by this DVD recorder.
System Menu - Setup System 1 Turn on the TV set. Select the correct DVD-VIDEO-TITLE 04|CO1 Video In channel at the TV. English Accessing the Setup options STOP System 2 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on TV. 3 Press 4 repeatedly to select { Set-up }. Set-up Auto standby Second RC OSD Display ➜ Playback will pause. DVD-VIDEO-TITLE 04|CO1 STOP System Time-date Analog Ch.
System Menu - Setup (cont’d) English { Display } Allows you to change the brightness of the DVD recorder display panel. – { Bright } : Normal brightness. – { Dimmed } : Medium brightness. – { Off } : Turn off the display. Video output DVD-VIDEO-TITLE 04|CO1 STOP Video output Set-up TV shape @ Black level { PBC } - for Video CDs only Play Back Control allows you to play Video CDs (2.0) interactively, following the menu on the display.
{ Progressive } Allow you to turn on the progressive scan function if the DVD recorder is connected to a TV with progressive scan. – { On } : Select this to enable progressive scan function. – { Off } : Select this to disable the progressive scan function. Audio output After connecting the DVD recorder to your TV and other devices, you may need to change the digital output setting. Adjust the Digital Output only if you use the DVD recorder’s COAXIAL jack.
Setting Access Control English About Access Control Access Control limits viewing of discs that exceed the limits you set. We cannot guarantee the availability of Access Control with all discs, and therefore denies any liability associated with unintended watching of discs. Setting or changing the pin code The same pin code (password) is used for both Parental Control and Child Lock. Enter your four-digit password to play a prohibited disc or if prompted for a pin code.
Activating/Deactivating the child lock This function can prevent children from viewing discs. This DVD recorder can memorize settings for 50 discs. When in use, a four-digit pin code must be entered in order to play a disc. 1 Press SYSTEM-MENU on the remote control. ➜ The system menu appears on the TV. 2 Press 4 to select { Preferences }. 3 Press 2 repeatedly to select { Access } and press 4 to confirm.
Setting Access Control (cont’d) Rating explanations English Restricting playback by Parental Control { – } – Parental Control is not active. Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children, or have certain discs played with alternative scenes.
Disc types Front Connections Recording : DVD+RW/+R Playing : DVD-Video,Video CD, SuperVCD,Audio CD, MP3 CD, Picture CD, CD-R/RW, DVD-R, DVD-RW – – – – Record modes Timer Recording recording time / picture quality M2: 120 minutes / DVD quality M2x: 150 minutes / DVD quality M3: 180 minutes / S-VHS quality M4: 240 minutes / VHS quality M6: 360 minutes / VHS quality M8: 480 minutes / VHS quality – 1-month timer programming, 6 events – weekly repeat recording TV systems Digital Photo Manager Playback:
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer for help. Problem Solution No power. – Press STANDBY-ON button on the front of the DVD recorder to turn on the system.
Problem Solution Disc will not play. – Insert the disc with the label facing up. – The child lock is on. Read chapter “Setting Access Control Activating/Deactivating the child lock” for details. – Wrong region code. The DVD must be coded for ALL regions or Region 1 in order to play on this DVD recorder. – There is no recording on the disc or wrong disc type. Read chapter “Playback - Playable discs” for details. – Make sure the disc is not scratched or warped. Clean the disc or replace a new one.
Troubleshooting (cont’d) English Problem Solution Recordings are not occurring as scheduled. New recordings cannot be made. – The TV channel you want to record is not stored or you selected the wrong program number. Check TV channels stored. – If you adjust the clock after you set a timer recording, reset the timer recording. – If the DVD recorder cannot read the disc, you cannot record.
Problem Solution The message ‘NO SIGNAL’ appears. – Check that the cable is plugged in firmly. – If a recording is made from a video recorder, change the tracking on the video recorder. – The DVD recorder may not be able to recognize the video input signal if this signal is poor or does not comply with relevant standards. The message 'Recording of will start within 1 minute' appears. – – – Select { Switch now } to switch the DVD recorder to standby mode.
Display panel symbols/messages English The following symbols/messages may appear on your DVD recorder display: ● COMPATIBLE The DVD Recorder is busy making changes to make the disc DVD-compatible. ● CLOSING Disc tray is closing. ● 00:00 Multifunction display/text line – Title/track number – Total/elapsed/remaining title/track time – Disc/title name – Error or warning messages – Additional information regarding the disc – TV channel number or source of video – Clock (This is displayed in Standby mode).
Display panel symbols/messages (cont’d) ● POST FORMAT The DVD Recorder is currently in the first installation mode. Turn on your TV and read the section, 'First installation', in the chapter 'Installing the DVD Recorder'. English ● IS THE TV ON? The disc is being prepared after the menu structure has been created. ● PROTECTED Disc is copy-protected and cannot be recorded. ● MAX TITLE The maximum number of titles has been reached for the disc. Each disc can have a maximum of 49 titles.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Red and white jacks on the back of the system that send audio to another system (TV, Stereo, etc.).
MAGNAVOX LIMITED WARRANTY One (1) Year Labor and Parts Repair (Facility) MAGNAVOX warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive warranted repair on the product. A sales receipt or other document showing the product and the date that you purchased the product as well as the authorized retailer included, is considered such proof.
DVD RECORDER 660 CLASS 1 LASER PRODUCT 3139 246 14762 Printed in China SgpJP-0511-17-1 70 MRV660_17_Eng40 70 9/3/05, 10:26 AM 3139 246 XXXXX
