Before you start Owner’s Manual Connections Recordable disc • We strongly recommend for good recording quality: SONY DVD+RW 4x, MAXELL DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, TDK DVD+R 4x/8x/16x, MAXELL DVD-RW 4x, MAXELL DVD-R 8x/16x • Discs that have been tested and are proven to be compatible with this recorder: VERBATIM DVD+RW 4x VERBATIM DVD+R 8x VERBATIM DVD-RW x VERBATIM DVD-R 8x JVC DVD-RW 4x MAXELL DVD-R 16x DVD Recorder with Video Cassette Recorder Getting started MWR20V6 OPEN/CLOSE Recordin
Before you start Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before you start IMPORTANT SAFEGUARDS NFPA No. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig.
Before you start Precautions (cont’d) Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Before you start Maintenance Editing Changing the Setup menu VCR functions Others Español E9A80UD_MWR 0V6_01.indd 5 5 Playing discs EN Recording Dolby Digital Recording “Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD.
Before you start Table of contents Before you start . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symbol in this Owner’s Manual . . . . . . . . . . . . . . . 7 Functional overview . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing batteries in the remote control . . . . . .
Before you start Up to 8 program recording: You can program the unit to record up to 8 programs, with in a month in advance. Daily or weekly program recordings are also available. One-touch Timer Recording: Dubbing mode: Left channel stereo recording: This unit can record the sound of the Left channel monaural input as Left and Right channels automatically. Automatic Chapter mark setting: DVD mode Automatic Title list making: The unit makes a title list with the index automatically.
Before you start Functional overview Front Panel 2 3 4* 5 OPEN/CLOSE POWER ON STANDBY-ON REW (*) The unit can also be turned on by pressing these buttons. 1 F.FWD STOP/EJECT PLAY RECORD CHANNEL IR 22 20 18 23 21 19 1. STANDBY-ON button (DVD/VCR) Press to turn on and off the unit. 2. POWER ON indicator (DVD/VCR) Red LED lights up when power is on. 3. Cassette compartment (VCR) Insert a videotape here. 4. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray. 5.
Before you start Remote Control Playing discs Editing Changing the Setup menu VCR functions Others Español E9A80UD_MWR 0V6_01.indd 9 9 Recording EN Getting started - 20. AUDIO button (VCR) During playback a HiFi videotape, press to change the AUDIO OUT setting “HIFI” and “MONO”. 21. OPEN/CLOSE A button (DVD/VCR)* • DVD mode Press to open or close the disc tray. • VCR mode Press to remove the videotape from the cassette compartment. 22. TITLE button (DVD) Press to display the Title list. 23.
Before you start Functional overview (cont’d) Installing batteries in the remote control Using a remote control Install two “AAA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor on the unit.
Before you start Guide to Displays On Screen menu This unit uses the following On Screen menu for most operations: Setup menu and Title list, and Display menu. They allow you to change the playing status of the disc during play. The Display menu also gives you information on the status of the disc or a videotape. Press [SETUP] to display the Setup menu, then press [OK] to display each menu, using [K / L]. These menus provide entries to all main functions of the unit.
Before you start Functional overview (cont’d) Display menu DVD mode First: DVD Press [DISPLAY] to call up the Display menu. This menu will give you the information on the disc. Some operations are available while disc is inserted in the unit. 1 4 1 1 0:00:00 DVD+RW CH 8 Stereo 5 2 1. Indicates a disc type and a format mode. (Format mode is displayed with DVD-RW/DVD-R (Video mode) discs inserted.) NOTE: In some descriptions on this manual, only one disc type is indicated as an example. 2.
Before you start Before you start Functional overview (cont’d) Front Panel Display Guide 4 2 1 Connections 3 7 6 5 1. Current Status of the unit :Appears when playing back a disc or a videotape. :Appears during repeat playback (disc playback only). 2. Disc type and Current status of the unit :Appears when an Audio CD or a disc with MP3 files is on the disc tray. :Appears when indicating a chapter number. 5.
Connections Connection to a TV Antenna (Back of TV) Cable TV signal (Back of TV) Antenna Cable TV signal 3 or or Connect RF cable (supplied) 4 Plug in the AC power cord of this unit.
Connections Before you start Connection to a TV (cont’d) AUX Panasonic TV/VIDEO Curtis Mathis LINE1, LINE2, 00, 90, 91, 92, 93 RCA INPUT, TV/VCR, 00, 90, 91, 92, 93 GE INPUT, TV/VCR, 00, 90, 91, 92, 93 Samsung TV/VIDEO Hitachi INPUT, AUX Sanyo VIDEO JVC VIDEO, VIDEO 1, VIDEO 2, VIDEO 3 Sharp 00 Kenwood AUX Sony VIDEO1, VIDEO2, VIDEO3 LXI-Series 00 Toshiba TV/GAME Magnavox AUX CHANNEL Zenith 00 Getting started Admiral Connections After you have completed connections • Swit
Connections Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information.
Getting started The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs. Step 2: Turn on the unit. Remote Control VIDEO/TV VCR DVD Getting started STANDBY-ON OPEN/CLOSE .
VIDEO/TV Getting started STANDBY-ON Easy DVD recording (cont’d) VIDEO/TV VCR DVD VCR DVD .@/: ABC 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN ABC DEF 1 2 3 GHI JKL MNO PQRS TUV WXYZ CLEAR/C-RESET SPACE TITLE STANDBY-ON Step 5: Select the desired 3 1 2 channel. VIDEO/TV VCR DVD .@/: ABC GHI JKL OPEN/CLOSE DEF STANDBY-ON 4 VIDEO/TV 5 VCR PQRS MNO DVD TUV 7 8 .
Getting started 1 Press [STANDBY-ON ]. 4 Press [OK] to start Channel Preset. The unit will start getting channels available in your area. Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 15. CH 1 DVD OPEN/CLOSE .@/: ABC 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 DISPLAY OK DISC MENU SETUP After channel setting is finished, “Clock Setting” will appear. Then press [OK].
Getting started Channel setting (cont’d) To select a channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number. (For example: 117, press [1], [1], [7]) • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). • You can select the line input mode (“E1” or “E2”).
Getting started Before you start Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. 1 Using [K / L], select “TV Audio Select”. Press [OK]. Option window will appear. TV Audio Select 2 STANDBY-ON VCR DVD VIDEO/TV Stereo VCR .@/: SAP ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN 4 Using [K / L], select “Stereo” or “SAP”. Press [OK].
Getting started Setting the clock Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 23. Auto Clock Setting Make sure • The antenna/Cable TV connections are correct. • If this unit is connected to a Cable Box or Satellite Box, select the local PBS station on them to set the clock automatically.
Getting started Before you start Setting the clock (cont’d) Manual Clock Setting 4 Using [K / L], enter the date (month / day / year). Press [{ / B] to move the cursor. 1 Press [SETUP]. Clock Setting VIDEO/TV VCR DVD Using [K / L], select “Clock”. Press [OK]. .@/: JAN / 01 / 2006 ( SUN ) 12: 00 AM DEF 1 2 3 JKL MNO 4 5 6 TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN 5 Using [K / L], enter the time (hour / minute). Press [{ / B]. A cursor will move on AM.
Getting started Setting the clock (cont’d) Setting the Daylight Saving Time 3 When “Daylight Saving Time” is “ON”, the unit clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. “ON” has been selected as the default. STANDBY-ON Using [K / L], select “Daylight Saving Time”. Press [OK]. Option window will appear.
Recording Information Recording mode This unit can record to DVD+RW/DVD-RW/DVD+R/ DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. These discs are formatted with DVD+VR mode automatically. Discs other than DVD+VR mode cannot be recorded in this unit. You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows. 8cm Disc Attributes 36 min SPP (2.
Recording Information on DVD recording (cont’d) Making discs playable in other DVD player (Finalize/Make Edits Compatible) After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to page 37.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 65) for playing on other units after editing. ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ DVD+RW Editing titles DVD+R DVD-RW/DVD-R ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ Playable OPEN/CLOSE POWER ON STANDBY-ON REW F.
Recording Before you start Before recording Replacing disc menu STANDBY-ON DVD+RW DVD+R +VR DVD-RW +VR DVD-R VIDEO/TV Using [K / L], select “Replace Disc Menu”. Press [OK]. Option window will appear. Replace Disc Menu DVD VCR DVD OPEN/CLOSE .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE Connections 0 ON RETURN OFF 2 3 4 1 Press [SETUP].
Recording Basic recording DVD+RW DVD+R +VR DVD-RW +VR DVD-R Follow the steps below to record TV programs. 6 Using [CHANNEL - / +] or the Number buttons, select a desired channel to record. CH 12 1 Press [STANDBY-ON ]. Turn the TV on and be sure to select the input to which the unit is connected. Press: DVD 2 6 disc tray guide VCR DVD OPEN/CLOSE .
Recording DVD+RW DVD+R +VR DVD-RW +VR DVD-R STANDBY-ON VIDEO/TV VCR .@/: 3 DVD ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS 1 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN DISPLAY OK DISC MENU Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit.
Recording Timer Recording VR DVD-RW DVD+R DVD+RW +VR VCR DVD-R You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before setting a timer programming. • Insert a recordable disc or a videotape with a record tab. 1 Press [TIMER]. Timer Programming list will appear. Timer Programming Date 2 1. --- 2. --- 3. --- 4. --- 5. --- 6. --- Start End CH Using [K / L], enter the Date.
Recording STANDBY-ON Checking, canceling, or correcting the timer programming information 2 Press [TIMER]. Timer Programming list will appear. .@/: Start 1. JAN/01 12:57AM 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- VCR DVD End 1:57AM CH 8 DVD VCR Mode DVD HQ To clear the timer programming: Using [K / L], select your desired program. Press [CLEAR/ C-RESET]. To correct the timer programming: Using [K / L], select your desired program. Press [OK].
d sc. l ed Recording Timer Recording (cont’d) Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a recordable disc is not on the tray or an unrecordable disc is on the tray, “DVD” on the front panel display flashes and Timer Recording cannot be performed. In some cases, “DVD” flashes momentarily around the Timer starting time as the unit attempts to record.
Recording Overwriting from the beginning of the title +VR DVD-RW DVD+RW Play Edit Overwrite You can overwrite the existing title from the beginning. VIDEO/TV DVD OPEN/CLOSE NOV/22/06 11:35AM CH13 EP NOV/22/06 0:10:33 .@/: 1 2 3 3 GHI JKL MNO 4 5 6 TUV WXYZ EMPTY TITLE 3:15:44 EP(4Hr) ABC PQRS 5 DEF 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN Using [K / L], select “Overwrite”. Press [OK]. Channel can be changed.
Recording Overwriting an existing title (cont’d) Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Title name: A Existing Title (B) Title name: B After overwriting PROG. A Title name: A Title name: B 30 - 180 seconds will be cut off.
Recording Before you start Settings for an external source Connection to an external source +VR DVD+R DVD+RW +VR DVD-RW VCR DVD-R Another source (VCR camcorder etc.) OUTPUT S- VIDEO VIDEO AUDIO L R OUTPUT S- VIDEO R Getting started or Video cable S-Video cable Audio cable or S-VIDEO VIDEO AUDIO L or S-Video cable Connections Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear).
Recording Settings for an external source (cont’d) Recording from an external source DVD+RW DVD+R +VR DVD-RW +VR DVD-R VCR This operation may take a while to be recognized. VCR When you want to record to a videotape: Press: Insert the videotape with a record tab into the cassette compartment. 4. Select the input of the unit which the external equipment is connected.
Recording Before you start Playing the discs in other DVD players Finalizing a disc DVD+R +VR DVD-RW +VR DVD-R STANDBY-ON VIDEO/TV • To cancel finalizing at step 4, press [STOP C], select “Yes” with [{ / B], then press [OK]. Finalizing is cancelled and the unit will be in stop mode. VCR .@/: DVD ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS 7 8 9 CLEAR/C-RESET SPACE TITLE 0 4 RETURN DISPLAY OK DISC MENU SETUP 1 Press [SETUP].
Recording Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R +VR +VR DVD-RW DVD-R You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space. STANDBY-ON 4 VIDEO/TV Using [K / L], select “Disc Full” or “End of Timer Rec”. Press [OK]. Option window will appear. Auto Finalize - Disc Full DVD Press [SETUP].
Recording Before you start Dubbing Mode DVD+RW +VR DVD-R DVD+R +VR DVD-RW VCR Using [K / L], select “Dubbing Mode”. Press [OK]. Option window will appear. STANDBY-ON VIDEO/TV VCR .@/: Dubbing Mode VCR DVD DVD VCR VCR DVD DVD ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN DISPLAY Make sure: • Insert a recordable disc and a videotape with a record tab.
Recording XXXX (cont’d) Dubbing Mode (cont’d) VCR to DVD DVD to VCR 4 Using [K / L], select “VCR DVD”. Press [OK]. Dubbing Mode VCR DVD STANDBY-ON 4 Using [K / L], select “DVD VIDEO/TV .@/: VCR”. Press [OK]. Dubbing Mode VCR DVD VCR DVD DVD VCR DVD VCR VCR ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS VCR DVD DVD 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN DISPLAY OK DISC MENU SETUP 6 5 Press [SETUP] to exit.
Playing discs Before you play DVD discs, read the following information. Region codes This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit. Other disc types are not guaranteed to play. This unit has been designed to play DVD discs with Region One (1). DVDs must be labeled for ALL regions or for Region 1 in order to play on the unit.
Playing discs Basic playback Playback STANDBY-ON DVD+RW DVD+R +VR DVD-RW 5 VIDEO/TV Using [K / L], select a desired title. Press [OK]. Pop-up window will appear. +VR DVD-R 1 Press [STANDBY-ON ]. Turn the TV on and be sure to select the input to which the unit is connected. DVD Press: Play Edit Overwrite 1 NOV/22/06 11:35AM CH13 EP NOV/22/06 0:10:33 EMPTY TITLE 1:37:52 SP(2Hr) 3 Insert your disc with its label facing up. Align the disc to the disc tray guide.
Playing discs DVD-V DVD-RW CD Video CD Video DVD-R 1 Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. 3 Playing MP3 disc 1 In stop mode, press [TITLE] to call up the MP3 menu. File List DISC NAME 3 • To exit the menu, press [TITLE] again. 2 When selecting track: Playback will start. 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 2 DEF 0 DISPLAY OK DISC MENU SETUP 4 5 CHANNEL Press [STOP C] to stop playback.
Playing discs Basic playback (cont’d) Playing discs using the disc menu 2 DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press [DISC MENU]. DVD First: 1 Press [DISC MENU]. Disc menu will appear.
VIDEO/TV VCR .@/: Playing discs DVD+RW Video Video DVD-RW DL +VR DVD+R DVD-RW CD MP3 Video CD 6 WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE Press [PLAY B]. Fast forward / Fast reverse DL +VR CHANNEL Note TIMER VCR REC DVD REC REC MODE TIMER SET SLOW DVD-RW CD MP3 Video CD CM SKIP RAPID PLAY • For MP3 files, playback will resume from the beginning of the track at which playback was stopped.
STANDBY-ON Playing discs VIDEO/TV .@/: Special playback (cont’d) DVD-V DVD+RW Video Video DVD+R +VR DL DVD-RW DVD+R B B During playback, press [RAPID PLAY]. 3 MNO 4 5 6 TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 DVD-R RETURN DISPLAY B DISC MENU : Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. : Press [RAPID PLAY] three times to play back in normal speed. No effects.
Playing discs Before you start Special playback (cont’d) Zoom DVD-V DVD+RW Video Video DVD-RW DVD+R DVD-R DVD-Video Using [{ / B], select [OK]. Zoom menu will appear. 1 0:00:00 VCR .@/: Using [K / L], select a desired zoom factor to zoom. Press [OK]. The zoom area will be displayed. ABC 2 3 JKL MNO 4 5 6 TUV WXYZ PQRS 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN 2 3 4 DISPLAY OK DISC MENU SETUP TIMER SET SLOW SEARCH Using [K / L / { / B], select a desired zoom position.
STANDBY-ON VIDEO/TV Playing discs Search Title/Chapter search DVD+RW DVD-V Video DVD+R DL DVD+R +VR DVD-RW VCR OPEN/CLOSE ABC 1 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 +VR RETURN DVD-R DISPLAY Video DVD-RW DVD .@/: DVD-R OK DISC MENU Using [SKIP H / G] SETUP 1 1 CHANNEL During playback, press [SKIP G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time.
STANDBY-ON VIDEO/TV Playing discs Track search DVD OPEN/CLOSE ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE Before you start Search (cont’d) VCR .@/: 0 CD MP3 RETURN Video CD DISPLAY Using [SKIP H / G] OK DISC MENU 1 During playback, press [SKIP G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [SKIP H].
Playing discs Repeat/Random/Program playback Repeat playback DVD+RW DVD-V Video DVD-RW DVD-RW CD MP3 Video CD 0:00:00 Using [K / L], select a desired option to repeat. Press [OK]. The selected repeat play will start. DVD-Video Using [{ / B], select . Press [OK]. Repeat menu will appear.
STANDBY-ON Playing discs VIDEO/TV VCR 1 2 Video CD 3 GHI JKL MNO 1 3 09 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Total 0:06:11 5 Press [PLAY B]. Program playback will start.
Playing discs Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V CD Video CD STANDBY-ON
Playing discs Before you start Selecting the format of audio and video (cont’d) Switching camera angles DVD-V VIDEO/TV 2 Using [{ / B], select . Press [OK]. Angle will switch each time you press [OK]. 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 2 DISPLAY OK DISC MENU 1 SETUP DVD-Video Getting started 0:00:00 OPEN/CLOSE 0 During playback, press [DISPLAY]. Display menu will appear. 1 DVD ABC RETURN 1 1 VCR .
Editing Information on disc editing Guide to a title list Editing discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original.
Editing Before you start Editing discs Deleting titles DVD+RW DVD+R +VR DVD-RW +VR DVD-R SP (2Hr) 1 DVD ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 Yes PQRS TUV WXYZ No 7 8 9 CLEAR/C-RESET SPACE TITLE 1 0 RETURN DISPLAY 2 3 4 5 OK NOV/22/05 11:00AM CH12 EP DISC MENU 0:00:59 5 SETUP CHANNEL Using [K / L], select “Yes”. Press [OK]. After that, “Are you sure?” will appear, select “Yes” and then press [OK]. Title will be deleted.
Editing Editing discs (cont’d) Putting names on titles DVD+RW DVD+R +VR DVD-RW +VR DVD-R You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list. DVD First: 4 STANDBY-ON Using [K / L], select “Yes”. Press [OK]. The name you entered will be activated for the title. VIDEO/TV .
Editing Before you start Editing discs (cont’d) Setting chapter marks DVD+RW +VR DVD-RW DVD+R +VR DVD-R Using [K / L], select “Add”. Press [OK]. Confirmation window will appear. STANDBY-ON VIDEO/TV Chapter Mark - Add 3 Yes No Chapter OPEN/CLOSE 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS 2/ 2 DVD ABC DEF 7 8 9 CLEAR/C-RESET SPACE TITLE 0 6 F Follow steps 1 to 3 on page 55 to display the Edit menu. 2 Using [K / L], select “Chapter Mark”. Press [OK].
Editing Editing discs (cont’d) Clearing chapter marks DVD+RW +VR DVD-RW DVD+R STANDBY-ON Confirmation window will appear. Chapter Mark - Delete +VR 3 Yes No DVD Chapter 1 2 2/ 2 DVD OPEN/CLOSE ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 F Follow steps 1 to 3 on page 55 to display the Edit menu. VCR .@/: DVD-R First: VIDEO/TV NOV/22/05 11:00AM CH12 EP 0:00:59 6 RETURN DISPLAY OK DISC MENU Using [K / L], select “Chapter Mark”.
Editing Before you start Editing discs (cont’d) Hiding chapters DVD+RW DVD+R +VR DVD-RW +VR DVD-R Follow steps 1 to 3 on page 55 to display the Edit menu. 2 Using [K / L]], select “Current Chapter”. Press [OK]. Option window will appear. VIDEO/TV This operation may take a while to be completed. If you want to return “Visible”, select the chapter to be shown. Then using [K / L],, select “Visible” at the step 4 on this page.
Editing Editing discs (cont’d) Setting pictures for thumbnails DVD+RW +VR DVD-RW DVD+R +VR DVD-R You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default. DVD First: 1 Follow steps 1 to 3 on page 55 to display the Edit menu. 4 STANDBY-ON Using [K / L], select “Yes”. Press [OK]. A picture for thumbnail will be set.
Editing Before you start Editing discs (cont’d) Dividing a title DVD+RW +VR DVD-RW 1 Follow steps 1 to 3 on page 55 to display the Edit menu. Using [K / L], select “Yes”. Press [OK]. The title will be divided into two new titles. Both title names are identical, and index pictures are reset to the first scene at this point. STANDBY-ON VIDEO/TV VCR .
Editing Editing discs (Setup menu) Putting name on disc DVD+RW DVD+R +VR DVD-RW +VR DVD-R You can put title names on the titles and change the names from this menu. 3 Using [K / L], select “Edit Disc Name”. Press [OK]. A window for entering a title name will appear. Press [STOP C] if you are playing a disc. STANDBY-ON VIDEO/TV .
Editing Before you start Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD+RW DVD+R +VR DVD-RW +VR DVD-R Using [K / L]], select “Disc Protect OFF ON”. Press [OK]. Confirmation window will appear. Setting disc to protect First: Disc Protect OFF DVD STANDBY-ON VIDEO/TV .@/: ON No DVD ABC OPEN/CLOSE DEF 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS Yes 1 VCR Connections To prevent accidental editing, or erasing the titles, you can protect them.
Editing Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont'd) Releasing disc from protect First: DVD 1 Follow steps 1 to 2 on page 62 to display the Disc Edit menu. 2 Using [K / L]], select “Disc Protect”. Press [OK]. Confirmation window will appear.
Editing Editing discs (Setup menu) (cont’d) Erasing disc DVD+RW +VR DVD-RW Video DVD-RW Using [K / L]], select “Erase Disc”. Press [OK]. Confirmation window will appear. Erase Disc Yes Press [STOP C] if you are playing a disc. DVD 1 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE 0 RETURN 2 3 DISPLAY OK DISC MENU SETUP No CHANNEL DVD When you press “Yes”, all the contents in the disc will be erased.
Changing the Setup menu Tour of the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup 1.Language setting Pages 67-68 2.Display setting Pages 68-69 3.Audio setting Pages 69-70 Items (highlight is the default) Disc Menu Language English French Spanish Contents Set the language for disc menu. Audio Language Original English French Set the language for audio.
Changing the Setup menu Before you start Language setting Press [STOP C] if you are playing a disc. STANDBY-ON 1 VIDEO/TV Press [SETUP]. OPEN/CLOSE 1 2 3 GHI JKL MNO 4 5 6 TUV WXYZ PQRS Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. DVD ABC DEF 7 8 9 CLEAR/C-RESET SPACE TITLE Connections 2 VCR .@/: 0 RETURN Using [K / L], select “Language”. Press [OK]. Language menu will appear. 4 OK DISC MENU SETUP 1 CHANNEL Using [K / L], desired item.
Changing the Setup menu Language setting (cont’d) If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle DVD Code Input - - - - Note • When you finish entering the code, press [OK]. Refer to the language code table on page 81. • Only the languages supported by the disc can be selected. • Audio Language setting may not be available to some discs. • You can change or switch off the subtitles on a DVD disc also from1 the 2disc menu if it is 3 available.
Changing the Setup menu Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. DVD Display DVD Screen Saver English OFF Angle Icon ON 5 minutes Screen Saver 10 minutes 10 minutes OSD Language • Using [K / L], select a setting. Press [OK]. Your setting will be activated.
Changing the Setup menu Audio setting (cont’d) A Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [OK]. Your setting will be activated. 48kHz :If your amplifier/decoder is NOT compatible with 96kHz PCM, select “48kHz”. 96kHz sound will be output in 48kHz. 96kHz :If your amplifier/decoder is compatible with 96kHz PCM, select “96kHz”. 96kHz sound will be output.
Changing the Setup menu VIDEO/TV VCR DVD OPEN/CLOSE .@/: ABC DEF GHI JKL MNO TUV WXYZ Progressive Scan (Default : OFF) 3 1 2 This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images 4 5 6 than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. PQRS 1 9 TITLE RETURN Using [K / L], select “Playback”. Press [OK]. 3 Using [K / L], select “Video”. Press [OK].
STANDBY-ON Changing the Setup menu VIDEO/TV Settings for Parental lock level VCR DVD OPEN/CLOSE .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ CLEAR/C-RESET SPACE Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you 8 9 7 set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. 0 RETURN 2 3 4 Press [STOP C] if you are playing a disc.
STANDBY-ON VIDEO/TV VCR DVD .@/: Changing the Setup menu OPEN/CLOSE ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE Settings for Parental lock level (cont’d) 0 5 RETURN DISPLAY Press [SETUP] to exit. OK DISC MENU 5 SETUP Connections CHANNEL Note TIMER VCR REC DVD REC REC MODE • Press [CLEAR/C-RESET] to erase numbers entered incorrectly.
VCR functions Playback xxxx Playback STANDBY-ON VCR 1 Press [STANDBY-ON ] on the remote control or the front panel of the unit. When you are playing a videotape, turn the TV on and be sure to select the input to which the unit is connected. VCR Press: VIDEO/TV 4 Press [PLAY B] to resume play. 5 Press [STOP C] to stop OPEN/CLOSE .@/: ABC 1 2 3 GHI JKL MNO 6 Press [STOP C / EJECT A] on the front panel of the unit to eject the videotape.
VIDEO/TV VCR .@/: VCR functions DVD OPEN/CLOSE ABC DEF 2 3 JKL MNO 4 5 6 TUV WXYZ PQRS Recording and One-touch Timer Recording (cont’d) xxxx 1 During normal recording, press (Normal recording) (0:30) (8:00) (1:00) (7:30) OK To change the recording length during the One-touch Timer Recording, press [VCR REC I] repeatedly until the desired length appear. To cancel the One-touch Timer Recording within the specified time, press [STOP C].
VCR functions Search (cont’d) xxxx Time search STANDBY-ON VIDEO/TV VCR This feature allows you to go to a specific point on a videotape by entering the exact amount of time you wish to skip in order to reach the point. VCR First: 1 Press [SEARCH] repeatedly so that the TIME SEARCH menu appears. 2 Using the Number buttons, enter your desired time to skip within 30 seconds. You can set the time up to 9:59. TIME SEARCH 2:50 VCR .
Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance. Symptom The power does not turn on. TV program pictures are distorted. Playback picture is distorted. There is no sound. VCR functions Others Español E9A80UD_MWR20V6_02.
Others Troubleshooting xxxx (cont’d) Symptom There is no picture. D V D 78 Remedy • If Setup menu appears on the TV screen, press [RETURN] (or [SETUP]) to exit. Picture noise appears. • The disc is dirty or flawed. • If the picture output signal from the unit passes through your VCR before reaching your TV, or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality.
Others Connections Symptom Remedy “Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Wait for a moment.” message is disappeared), a Repairing process will begin automatically just after Repairing turning the unit on again. It may take several minutes up to about four hours. D In a case you intend to cancel the • If you intend to cancel the Repairing process, press V Repairing process.
Others Troubleshooting xxxx (cont’d) Error message Cause Solution Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) • You are trying to record onto the disc on which the number of recording titles comes up to the maximum (99). • Delete unnecessary titles (page 55). Recording Error You cannot record more than 254 chapters on one disc.
Others The system developed by Dolby Laboratories to compress digital sound. It offers you sound of stereo(2ch) or multi-channel audio (up to 5.1ch). Aspect ratio Finalize The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high). To make recorded contents on DVD discs possible to be played back on DVD players.
Others Frequently Asked Questions –– Can I record on CD-RW/R? No, this unit records only DVDs. –– Can I play back DVD-Video that is bought in another country? Possible only if the region code of the disc is 1 and ALL. –– Is this unit JPEG compatible? No. –– Can I connect the unit to my PC? No, you cannot control the unit by PCs.
MEMO Before you start Connections Getting started Recording Playing discs Editing Changing the Setup menu VCR functions Others Español 2006/01/17 17:58:40 E9A80UD_MWR20V6_02.
Español Fácil grabación de DVD Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables. Este grabador de DVD puede grabar los siguientes tipos de discos. Paso 2: Encienda la unidad.
.@/: 4 5 6 PQRS TUV WXYZ 7 8 9 CLEAR/C-RESET SPACE TITLE Fácil grabación de DVD (cont.) STANDBY-ON Paso 5: Eleccione el canal des eado. 3 1 2 VIDEO/TV VCR DVD .@/: ABC GHI JKL OPEN/CLOSE DEF STANDBY-ON 5 VCR PQRS DVD 8 .@/: CLEAR/C-RESET ABC SPACE 1 2 0 JKL MNO PQRS TUV WXYZ CLEAR/C-RESET SPACE TITLE OK Paso 7: Pare la grabación.
Español Reproducción con videograbadora xxxx VCR 1 Presione [STANDBY-ON ] en el mando a distancia o el panel frontal de la unidad. Cuando reproduzca una cinta, conecte el TV y asegúrese de seleccionar la entrada donde se conecta la unidad. VCR Presione: STANDBY-ON VIDEO/TV VCR .@/: DVD ABC 2 3 JKL MNO 4 5 6 TUV WXYZ PQRS 7 8 9 CLEAR/C-RESET SPACE TITLE 0 2 Coloque una cinta pregrabada y presione [PLAY B] para empezar la reproducción. Durante la reproducción, presione [PAUSE F].
.@/: ABC 2 3 JKL MNO 4 5 6 TUV WXYZ PQRS Español DEF 1 GHI 7 8 9 CLEAR/C-RESET SPACE TITLE 0 DISPLAY OK Grabación VCR Primero: DISC MENU VCR Tiempo de grabación/reproducción T60 T120 T160 1 hora 2 horas 2-2/3 horas 3 horas 6 horas 8 horas 2 Presione [STOP C] cuando se complete la grabación. Prevención contra borrado accidental Para evitar una grabación por accidente en un casete grabado, rompa la lengüeta de grabación.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
1 Connections Remote Control (Back of TV) VIDEO AUDIO IN [Cable Box or Satellite Box] DVD Recorder with Video Cassette Recorder Playable discs 1 DIGITAL AUDIO OUT DVD S-VIDEO AUDIO OUT COMPONENT VIDEO OUT L OUT DVD-VIDEO DVD-R (VIDEO mode, Finalized) DVD+RW CD-DA (AUDIO CD) DVD+R CD-RW (CD-DA FORMAT, MP3 files) DVD+R Double Layer CD-R (CD-DA FORMAT, MP3 files) DVD-RW (VIDEO mode, Finalized) Video CD PB /CB R L L R R Indoor or Outdoor Antenna Connect ANTENNA IN OR IN - VIDEO
.@/: 3 ABC DEF 1 2 3 GHI JKL MNO 1 2 3 4 5 6 GHI JKL MNO PQRS TUV WXYZ 4 5 6 7 8 9 PQRS TUV WXYZ CLEAR/C-RESET SPACE TITLE 7 8 9 CLEAR/C-RESET SPACE TITLE DVD Recording 0 RETURN DISPLAY Easy Recording OK 3 –1 DISC MENU First: DVD SETUP Select the recording mode. Disc Size CM SKIP RAPID PLAY STANDBY-ON ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ STANDBY-ON 8 7 9 Select the desired 0 channel. CLEAR/C-RESET VIDEO/TV SPACE VCR .
