Manual

Connections
@
IMPORTANT!
- If the picture is distorted, check the
Video Output setting. Make sure it is set
to 'S-Video', see page 29.
@ Use the S video cable (not supp} ed) to connect
the DVD systerr,'s S-VIDEO OUT jack to the
S Video input jack (or labeled asY/C o¢ SVHS)
on the TV
To hear theTV channels throug_, this DVD
system, use the audo cables (wh te/red) to
connect TV IN (I/R) acks to tff,e
corresponding AUDIO OUT acl<s on theTM
@ Set the P-SCAN switch to'OFF'
IHPORTANT!
- If yourTV only has a single Antenna In
jack (or labeled as 75 ohm or RF in), you
will need an RF modulator in order to
view the DVD playback on theTV. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
@ Use the composite vdeo cable (yellow) to
connect the DVD system's CVBS ack to the
vdcxs input ack on tP'e RF modulator
Use the RF coaxial cabe (no: supplied) to
connect the RF modu ator to yourTV's RF jack.
@ Set the P-SCAN switch to 'OFF'
13
pg 001 044 Mx3g 37 Eng 1 13 2/25/03, 10:28 AM 3139 115 21993