Owner`s manual

INSTALLATION INSTRUCTIONS

Installation in a double-hung sash

window

1. Cut the foam seal(adhesive type) to the proper

length and attach it to the window sill. Fig.10

2. Attach the window slider kit to the window silll.

Adjust the length of the window slider kit according

to the width of window, shorten the adjustable window

kit if the width of window is less than 26.5 inches. Open

the window sash and place the window slider kit on the

window sill. See Fig.11.

3. Cut the foam seal(adhesive type) to the proper

length and attach

it on the top

of the window. Shown

as in Fig.12.

4. Close the window sash securely against the

window.

5. Cut the foam seal to an appropriate length and

seal the open gap between the top window sash

and outer window sash. Shown as in Fig.13.

Foam seal A

(adhesive type)

Window kit

Window sill

Foam seal

Fig.10

Fig.11

Fig.12

Fig.13

Window kit

Window sill

26.5 ~ 48.0