Owner`s manual

e.g.: Connection to DVD Recorder
Rear panel of STB
C
--------------------------------------------------------------------------------------------------------------------------------
----\
Supplied cables used in this connection are as follows:
• RF cable xl
Please purchase the rest of the necessary cables at your local store.
^
____________________________________________________________________________________________________________________________________________________
Before connecting, ensure the AC power cords of all devices are NOT connected to the AC outlets.
1 Refer to "Connecting an Antenna" on page 9 to connect the STB to an antenna.
2 Use a standard audio/video cable to connect the AUDIO/VIDEO OUT jacks on the
STB to the audio/video input jacks on the DVD recorder.
3 Use a standard audio/video cable to connect the audio/video output jack on the DVD
recorder to the audio/ video input jack on the TV.
4 Plug all AC power cords into AC outlets, then turn all devices on.
5 Set the TV and DVD recorder to input mode.
Refer to your TV's or DVD recorder's manual for details.
NOTE:
• If your DVD recorder is monaural (MONO) and has only one audio jack, use a standard
audio cable (white) to connect the AUDIO OUT jack (white) on STB to the audio input
jack (white)
on the DVD. The red cable and jack will not be
used.
INITIAL SETUP (SETUP
WIZARD)
I
Initial Setup
I
5 Select the connection for audio
output using H/H. then press [OK].
Select "AUDIO OUT"
if...
- you are using the standard audio cable to
connect the STB to your TV.
Select "RF OUT" if...
- you are using the RF cable to connect
the STB to your TV.
6 Select your time zone using [A /
Y], then press
[OK].
Page
10
of
25
TB100MW9 DTV Digital to Analog Converter (Set Top Box)
4/6/2009
mhtml:file://N:\WEBSITE\DTV Converter Box Manuals\Magnavox TB100MW9.mht