Owner`s manual

BASIC OPERATION
About Sub-channel Broadcasting
Digital broadcasting offers a service that
enables multiple signals, called "sub-
channels", to be sent simultaneously on one
main channel by using its high compression
technology. Therefore, every digital channel
number consists of a main channel and a
sub
-
channel number.
NOTE:
• If you do not have a particular sub-channel
number you want to select, enter the main
channel number and then press [OK]. (If
the main channel number is ldigit, you
should press [OK] twice.) The STB
automatically tunes in to the lowest sub-
channel for the selected main channel.
• Press [ALT. CH] to return to the
previously viewed channel.
• "NO SIGNAL" appears after the sub-
channel broadcast is over. Change the
channel to continue watching.
The channel banner provides you with
information on the channel you have
selected.
1 Press [DISPLAY] to display the
channel banner.
-►: changes
automatically
^>: changes manually
by
using
[CH+/
-
].
This section tells you how to
select the
desired digital channel on the STB.
NOTE:
• Before you begin, make sure you
complete the autoscan in "SETUP
WIZARD" or in "SETUP" menu.
When Using [CH+/-]:
• Press [CH + ] to tune a higher channel
number.
• Press [CH —] to tune a lower channel
number.
When Using the Number Buttons:
1. Enter the main channel number.
If the main channel number is 1 digit,
press [.] when finish entering.
If the main channel number is 2 digits,
proceed to step 2.
2. Enter the sub-channel number.
If the sub-channel number is 1 digit,
press [OK] when finish entering. (You
do not need to press [OK] if the sub-
channel number is 2
digits.)
Information
Icons
LOCK:
Indicates that the current program is
blocked according to your v-chip
setting.
CC (Closed Caption):
Indicates that the program being
broadcast is available with closed
captioning.
BASIC OPERATION
Page
12
of
25
TB100MW9 DTV Digital to Analog Converter (Set Top Box)
4/6/2009
mhtml:file://N:\WEBSITE\DTV Converter Box Manuals\Magnavox TB100MW9.mht