Owner’s Manual TB600MG2F HD Streaming Player with Built-in WiFi © 2011 Funai Electric Co., Ltd.
1. CONTENTS 1. CONTENTS ................................................................................2 12. SAFETY INSTRUCTIONS ................................................30 2. FEATURES.....................................................................................3 13. MAINTENANCE ...................................................................31 2.1 Features ........................................................................................... 3 2.2 Product Info ...................
2. FEATURES 2.1 Features VUDU EN This unit supports VUDU which is the leading HD on-demand video service. With VUDU, you can also enjoy various kinds of Internet applications. In order to use this feature, you must connect this unit to the Internet. (This feature is only available in the United States.) Netflix With this unit, you can enjoy movies and TV episodes streamed instantly from Netflix via the Internet. In order to use this feature, you must visit netflix.
2.2 Product Info “Product Info” screen provides information about this unit’s software version. When a newer version of software is available, you can update the software via the Internet. To access “Product Info”, follow the procedure below. 1. Press [HOME]. 2. Use [Í / Æ] to select “Settings”, then press [OK]. 3. Use [Î / ï] to select “Product Info”. ɶ Netflix ESN You can view the ESN (Electronic Serial Number, which Netflix uses to identify your device) on the “Product Info” screen.
3. FUNCTIONAL OVERVIEW 3.1 Top / Front Panel EN 1 2 Top Front 1. Infrared sensor window 2. Standby/on indicator D Note • Due to new ENERGY STAR® requirements, this unit will automatically turn On the screen saver after 5 minutes of inactivity and enter Standby mode after 25 minutes of inactivity. 3.2 Rear Panel 1 2 3 4 5 1. LAN terminal 4. AUDIO output jacks (L/R) 2. HDMI OUT jack 5. DC IN jack 3. VIDEO output jack C Caution • Do not touch the inner pins of the jacks on the rear panel.
3.3 Remote Control 6. ¢ (reverse) button During playback, press to fast reverse the playback. 7. Press to start playback or resume playback. 1 8. 2 3 B (play) button* H (skip) button During playback, press once to return to the beginning of the current title. 11 9. Ê (stop) button Press to stop playback. 12 10. NETFLIX button Press to launch Netflix. 4 11. DISPLAY button Press to display the on-screen display menu. 5 6 7* 8 9 10 13 14 15 16 17 12.
ɶ Installing the Batteries in the Remote Control Install 2 AAA (1.5V) batteries matching the polarity indicated inside the battery compartment of the remote control. EN C Caution Incorrect use of batteries can result in hazards, such as leakage and bursting. Please observe the following: • Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. • Do not mix new and old batteries together. • Do not use different kinds of batteries together.
3.4 Guide to On-Screen Display ɶ Home Menu When you turn On the unit, the home menu will automatically appear. Otherwise, press [HOME]. 1 2 3 NET APP : To access the menu of network services 1. “NET APP” : To access the setup menu 2. “Settings” 3. “Network Setup” : To configure network settings ɶ Setup Menu 1 Video Out Audio Out System Network Setup Product Info Video Resolution TV Aspect Deep Color : HDMI Auto : 16:9 Wide : Auto 2 1. Categories 2.
4. CONNECTIONS 4.1 HDMI Video / Audio Connection (Supports up to 1080p (outputs video data with a frame rate of 60 frames per second.) EN HDMI cable (not supplied) HDMI IN No audio connection required. • Make sure the shapes of the jack and the connector are matched and do not tilt the HDMI connector when inserting it into the HDMI jack. • When connected to an HDCP incompatible display device, the picture will not be displayed properly.
4.3 Connection to an Audio System • When you change the connections, you should turn Off all the devices. • When making connections with external devices, please refer to their user manuals for additional setup help. ɶ 2-Channel Analog Audio Connection Stereo system with analog audio input jacks AUDIO IN L R Audio cable (supplied) ɶ HDMI Audio Connection AV receiver/amplifier with an HDMI input jack HDMI IN HDMI cable (not supplied) ɶ HDMI Audio Out Audio Source PCM Stereo Bitstream PCM 5.
4.4 Connection to the Network By connecting this unit to the Internet you can update the software via the Internet or play contents of the network services. For more information about a software update, refer to “Network Update” on page 24. D Note • Wired connection is recommended when using the following features. (Using the following features with a wireless connection can be affected by other devices using radio frequencies.
ɶ Wireless Connection Networking equipment (modem, etc.) Internet LAN WAN Wireless router LAN cable (not supplied) D Note • After you made a wireless connection, perform the necessary network setup. (For the network settings of a wireless connection, refer to “Wireless” on page 19.) • For a wireless router, use a router which supports IEEE 802.11 b/g/n. (”n” type is recommended for stable operations of the wireless network.) • Set the wireless router to Infrastructure mode.
5. BEFORE YOU START 5.1 Finding the Viewing Video Source Input on Your TV After you have connected this unit to your TV with either an HDMI cable or video and audio cables, find the viewing source (external input source) on your TV. 1. Turn On your TV. EN 2. Press the button on the TV’s remote control that accesses the external input source. It may be labeled “SOURCE”, “AV”, ”AUX” or “INPUT” (refer to your TV’s user manual). 3.
6. USING NETWORK FEATURES 6.1 Preparation for Network Features Please follow the instructions below before using the network features. 1. Connect this unit to the Internet. • Refer to “Connection to the Network” on page 11. 2. Perform the necessary network connection setup. • Refer to “Network Connection” on page 17. 3. Press [NET APP]. NET APP 1 NET APP 2 NET APP 3 NET APP 4 NET APP 6 NET APP 7 NET APP 8 NET APP NET APP 5 4. Select the desired application, then press [OK].
7. LIST OF SETTINGS In the setup menu, you can customize various kinds of settings as you prefer. Refer to the following instructions to navigate through the setup menu. 1. Press [HOME] to access the home menu. 2. Use [Í / Æ] to select “Settings”, then press [OK]. 3. Use [Î / ï] to select the desired setting, then press [OK]. EN 4. Use [Î / ï] to move the highlight up and down in the list. 5. To make a selection or to access options of an item, select the desired item, then press [OK].
Categories Settings System Menus / Options Language fun-Link (HDMI CEC) Auto Update Check Network Update Initialize Network Setup Product Info EN-16 Disclaimer OSS Network List Easy Connect (WPS) Manual IP Settings Network Test English Français Español On Off On Off Restore factory settings and deactivate all connected applications Restore factory settings Deactivate all connected applications Deactivate Netflix Deactivate BLOCKBUSTER Deactivate FILM FRESH Deactivate Picasa Deactivate Pandora Deacti
8. SETUPS 8.1 Network Connection [HOME] Ȼ “Network Setup” D Note • Once a network connection is established, you are ready to use the network features, such as Netflix / BLOCKBUSTER / FILM FRESH / Picasa / Pandora / VUDU and the network update function, using the Internet without making any additional settings. • If a network connection could not be established, you may need to check your router settings and make sure the physical connection is secure.
Manual (Wired) In the following cases, select “Manual”(wired) to set each setting as necessary. - If a network connection could not be established when the setting was “Auto”(wired). - When instructed by your Internet service provider to make specific settings in accordance with your network environment. 1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK]. 2. At “IP Mode”, press [OK] , and set it to “Manual”, then press [OK].
D Note for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS” • The range of input numbers is between 0 and 255. • When you enter a wrong number, click on on the software keyboard to clear the incorrect number. • To correct the wrong number in the previous cell, press [RETURN] to start over. • If you want to enter a 1 or 2-digit number in one cell, type in on the software keyboard “001” for a 1-digit number, and “011” for a 2-digit number.
• If you do not know the WEP / WPA key for your wireless network, ask your ISP or the person who set up your wireless network. 5. Use [Î / ï / Í / Æ] to select “Connect”, then press [OK]. Network List ABCDE Password * * * * *WiFi ******** WiFi Connect ABCDE 12345 Cancel abcde WiFi Press OK to open keyboard WiFi 67890 WiFi fghij Password is case-sensitive 6. If a connection succeeded, press [OK] to finish the setting, then press [RETURN] to exit.
5. Use [Î / ï / Í / Æ] to select “Connect”, then press [OK]. 6. If a connection succeeded, press [OK] to finish the setting, then press [RETURN] to exit. • If you do not know the password (WEP / WPA / WPA2 key) for your wireless network, ask your ISP or the person who set up your wireless network. Easy Connect Push Button Method Please confirm your wireless router has a PBC (Push Button Configuration) button. If the router does not have it, please perform the “Network List” setup. 1.
4. Enter the router PIN that you obtained from your router into the router PIN field using [Î / ï / Í / Æ] on the software keyboard. • Please refer to your router’s user manual to learn where to find the router PIN. 5. Use [Î / ï / Í / Æ] to select “OK”, then press [OK]. 6. Press [RETURN] to exit. • In case the procedure failed, press [OK] to return to the previous screen, then try again. 8.
D Note • Composite video output (VIDEO) jack can only output 480i/60. • If you wish to have HDMI output and composite video output simultaneously, set the “Video Resolution” to “480i”. • When connected to a TV which supports up to 1080i, this unit does not output 1080p contents. (“1080p” will not appear if the TV does not support it.) • The selected resolution must also be supported by your display device. • Refer also to your TV’s manual.
ɶ Network Update 1. Use [Í / Æ] to select “Settings” in the home menu, then press [OK]. 2. Use [Î / ï] to select “System”, then press [OK]. 3. Use [Î / ï] to select “Network Update”, then press [OK]. If a newer software is available, the software update screen will appear. Press [OK]. There is a firmware update available which provides the following updates. It is recommended that you update the player firmware to this new version. Press OK to update. Press CANCEL to exit with no update.
9. TROUBLESHOOTING Problem No power. No sound or picture. No audio signal from the loudspeakers of the TV screen. No audio signal from the loudspeakers of the audio system. Distorted picture. No sound or distorted sound. Continued on next page. EN-25 EN No audio / video signal on the display device via HDMI cable. Tip Check if the AC adapter is properly connected. Unplug the AC adapter once, and wait for 5-10 seconds and then plug it in again. Check if the connected TV is turned On.
Problem The unit does not respond to the remote control. in the upper right hand corner of the TV screen. The unit stops responding. Cannot connect to the network. Tip Aim the remote control directly at infrared sensor window on the front or the top panel. (Refer to page 7) Reduce the distance to infrared sensor window. Check the +/– polarity of the batteries and replace both batteries in the remote control if required. Go to “IR Signal Check” on page 31.
Problem Streaming movies often stop or start buffering during playback. Cannot use the Film Fresh / Blockbuster feature. Cannot rent or buy movies / TV shows on VUDU. The picture quality of VUDU movie is poor. VUDU movie often stops or starts buffering during playback. Cannot use the Pandora® feature. Cannot use the Picasa feature. Check the speed of your Internet connection. You need speeds of at least 9 Mbps to this player for high quality uninterrupted playback.
10. SPECIFICATIONS General Signal system NTSC Color AC adapter power source AC 100 - 240V, 50 / 60 Hz Power requirements 6.5V DC Power consumption 6.5 W (Standby: 1.0 W) Dimensions (width x depth x height) 4.5 x 4.7 x 1.2 inches (114.1 x 118.0 x 29.5 mm) Weight 0.42 lb. (0.19 kg) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Less than 80 % (no condensation) Terminals DC input 6.
11. NETWORK SERVICE DISCLAIMER Content and services made available through this product are transmitted by third parties by means of networks and transmission facilities over which Company has no control and third party services may be terminated or interrupted at any time, and Company makes no representation or warranty that any content or service will remain available for any period of time.
12. SAFETY INSTRUCTIONS ɶ To Avoid the Hazards of Electrical Shock and Fire • Do not handle the AC adapter with wet hands. • Do not pull on the AC adapter when disconnecting it from an AC outlet. Grasp it by the AC adapter case to unplug it. • Do not put your fingers or objects into the unit. ɶ Location and Handling • Do not install the unit in direct sunlight, near strong magnetic fields, in a place subject to dust or strong vibration or on the wall behind the TV.
13. MAINTENANCE ɶ Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on page 25 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Place the unit into the Standby mode, unplug the AC adapter, and please visit www.magnavox.com/support for Online Support or contact Customer Service 1-800-605-8610. EN ɶ Cleaning the Cabinet • Wipe exterior surfaces of the unit with a soft cloth.
15. INSTALLING ON A WALL OR SHELF Screw clockwise to fasten. ɶ Installing on a wall Be sure to attach the wall-mount bracket securely to a wall. You may find it helpful to drill pilot holes into the mounting surface. Pilot holes should be slightly smaller than the body of the screws for a good hold. Position the unit so the wall-mount slots in the back of the unit line up with the two projecting tabs of the wall-mount bracket.
16. TRADEMARK INFORMATION Netflix and the Netflix logo are trademarks or registered trademarks of Netflix, Inc. http://www.netflix.com/HowItWorks EN Film Fresh and the Film Fresh logo are registered trademarks of Film Fresh Inc. http://filmfresh.roxionow.com/ BLOCKBUSTER name, design and related marks are trademarks of Blockbuster Inc. http://www.blockbuster.com VUDU™ is a trademark of VUDU, Inc. http://www.vudu.com/product_overview.
17. GLOSSARY HDMI (High-Definition Multimedia Interface) AAC A digital interface between audio and video source. It can transmit component video, audio, and control signal with one cable connection. Advanced Audio Coding (AAC) is a lossy compression and encoding scheme for digital audio. Audio files that have been encoded with AAC generally achieves better sound quality than MP3 at similar bit rates. Analog Audio An electrical signal that directly represents sound.
Subnet Mask A mask which is used to determine what subnet an IP address belongs to. VUDU VUDU is a leading HD on-demand video service which utilizes the Internet connection to deliver the highest quality on-demand video and Internet applications. EN 16:9 Pillarbox When a 4:3 formatted picture is shown on a 16:9 screen, the complete 4:3 picture is displayed while adding black bars on each side of the screen to hide the blank screen area.
18. ESPAÑOL 18.1 Mando a Distancia 6. Botón ¢ (reverso) Durante la reproducción, púlselo para invertir rápido la reproducción. 1 7. Botón B (reproducir)* 2 Púlselo para iniciar o reanudar la reproducción. 11 3 12 4 8. Botón H (saltar) Durante la reproducción, púlselo una vez para volver al comienzo del título, capítulo, pista o archivo actual. 9. Botón Ê (detener) 5 6 7* 8 9 13 14 15 16 10 17 Púlselo para detener la reproducción. 10. Botón NETFLIX Pulse para abrir Netflix. 11.
18.2 Encontrar la Entrada de Fuente de Video en su TV Después de haber conectado la unidad a su televisor, ya sea con un cable HDMI o de vídeo y los cables de audio, encuentra la fuente de visualización (fuente de entrada externa) en su televisor. 1. Encienda el televisor. 2. Pulse el botón del control remoto del televisor que tiene acceso a la fuente de entrada externa. Puede ser etiquetado como “SOURCE”, “AV”, “AUX” o “INPUT” (consulte el manual del usuario del televisor). 3.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
