Owner`s manual
1
CONNECTIONS
AV/SOURCE
[Auto Update Check]
Would you like to set on the Auto software update
feature? When connected to the internet, the unit will
automatically check for the latest software.
On
Off
[Language]
Please select your language for on-screen display.Please select your language for on-screen display.
English
Français
Español
Please Wait...
ReturnNext ReturnNext
[Initialization]
Welcome!!
This unit is ready for initialization now.
Set the language and network settings.
Please follow instructions to make correct settings.
Then the settings are initialized.
CancelNext
C
ance
l
N
ex
t
Español
Nex
Off
R
eturnNex
t
2
INITIAL SETUP
Press the button
on the TV’s remote
control that accesses
the external input
source.
Select your language.
Link Status : Link Up
MAC Address :
XX:XX:XX:XX:XX
IP Mode : Auto
IP Address : XX:XX:XX:XX:XX
Subnet Mask : XX:XX:XX:XX:XX
Default Gateway : XX:XX:XX:XX:XX
Primary DNS : XX:XX:XX:XX:XX
Secondary DNS : XX:XX:XX:XX:XX
Wired IP Settings
Link Status : Link Up
MAC Address :
XX:XX:XX:XX:XX
IP Mode : Auto
IP Address :
XX:XX:XX:XX:XX
Subnet Mask :
XX:XX:XX:XX:XX
Default Gateway :
XX:XX:XX:XX:XX
Primary DNS :
XX:XX:XX:XX:XX
Secondary DNS :
XX:XX:XX:XX:XX
Wired IP Settings
Network Setup
Network Test
Obtaining IP Address: Success
Connection to Router: Success
Resolving DNS: Success
Connection to Internet... : Success
Network Test
Obtaining IP Address
Please choose a new IP Mode value
Manual
Auto
Network Setup
Link Status : Link Up
MAC Address :
XX:XX:XX:XX:XX
IP Mode : Auto
IP Address : XX:XX:XX:XX:XX
Subnet Mask : XX:XX:XX:XX:XX
Default Gateway : XX:XX:XX:XX:XX
Primary DNS : XX:XX:XX:XX:XX
Secondary DNS : XX:XX:XX:XX:XX
Wired IP Settings
Cancel
Network Test
Apply
Cancel
OK
N
etwor
k Setu
OK
X
X
X
X
Cancel
Network Test
Apply
Cancel
Network Test
Apply
Default Ga
y
Prima
ry D
DN
N
S
S
:
XX:X
X
Secon
d
dary
ry
y
DNS
DN
S
:
D
XX
:
XX
Auto
Cance
l
Apply
ply
ply
A
ppl
y
3
WIRED SETUP
or
or
Wireless Connection
Wired Connection
Modem / Router
LAN cable
(not supplied)
Wireless broadband router
Active Internet connection is required
to your modem or broadband router.
Please check with your ISP (Internet
Service Provider) for further assistance.
HDMI cable (not supplied)
This unit automatically detects if a LAN cable is connected to it.
If a LAN cable is connected
, pl
ease go to in step
3
.
For a wireless connection, please go to in step
4
.
Audio cable (supplied)
Video cable (supplied)
Connection to a TV
Wired and Wireless Connections
Press
to exit.
Press
to exit.
Press
to exit.
Press
to exit.
Wireless
Network List
Easy Connect (WPS)
Manual
IP Settings
ABCDE
Password
Press OK to open keyboard
Password is case-sensitive
*************
Connect Cancel
1234567890
asdfghjkl ;
zx
Space
cvbnm, . /
-=\[]'`
q
Done
we r
y
uo
p
t
i
ABCDE
Password
Press OK to open keyboard
Password is case-sensitive
*************
Network Setup
W
PS)
Wireless
Network List
Easy Connect (WPS)
Manual
an
an
ual
ual
a
s
d
f
g
h
j
k
z
x
Spa
Space
Sp
S
c
v
b
n
m
,
-
=
\
[
`
Network Setup
Network List
ABCDEWiFi
12345
WiFi
abcde
WiFi
67890WiFi
fghij
WiFi
WiF
W
i
F
W
i
F
W
W
W
W
WiF
W
W
W
W
WiF
Network Se
tup
Connect Cancel
e
ss
OK
K t
t
t
t
o o
o op
ope
o o
o o
n keyboar
d
e
Cancel
C
onnec
t
Ma
Ma
Ma
Ea
E
Easy Connect (WPS)
Please press the PBC button on your router now.
SSID ABCDE
P
Success
K
to o
p
en keyboar
d
nect
C
ance
l
Pass
word
Pr
Passwo
rd is
case-s
ensiti
ve
O
o
e
e
4
WIRELESS SETUP
Screw clockwise to fasten.
Enjoy network applications!
“Network List”
“Easy Connect
(WPS)”
INSTALLING ON A WALL
INSTALLING ON A SHELF
Be sure to attach the wall-mount
bracket securely to a wall. You may find
it helpful to drill pilot holes into the
mounting surface. Pilot holes should
be slightly smaller than the body of
the screws for a good hold.
Position the unit so the wall-mount
slots in the back of the unit line
up with the two projecting tabs
of the wall-mount bracket. Place
the wall-mount slots over the two
projecting tabs on the wall-mount bracket, then slide the unit
down until the projecting tabs fit firmly into the wall-mount slots
on the unit.
* Do not place this unit behind the TV as this will block
the unit’s IR receiver.
Wall
3.9 in (10 cm) or more
This unit should not be placed in a book case, cabinet or a closed
off space unless it has proper ventilation. Make sure to leave space
of 3.9 inches (10 cm) or more as displayed.
If you have any questions or issues with your Internet connection, please contact your
Internet service provider. For the network applications, please contact each service provider.
SETUP MANUAL
TB600MG2F
See the Online Manuals for details:
www.MAGNAVOX.com
TB600M
Step 1 Access www.MAGNAVOX.com on Internet.
Step 2 Select Download.
Step 3 Type in Model #
“TB600MG2F”.
Step 4 Select Manual you need, then click on PDF Download
in right column to start download.
If you have any questions or issues with the product, please check the
Troubleshooting section of the Online Owner’s Manual. If additional
support is required please visit www.magnavox.com/support for
Online Support or contact Customer Service 1-800-605-8610.
*1VMN31494*
© 2011 Funai Electric Co., Ltd.
Printed in China
X6060UD
1VMN31494
★★★★★
MAGNAVOX is a registered trademark of Philips Electronics North
America Corporation and is used by Funai Electric Co. Ltd. and Funai
Corporation, Inc. under license from Philips Electronics North America.
For product recycling information, please visit - www.magnavox.com
Click on
Problem Tip
Cannot
connect to
the network.
• Check to see if there is power on the modem / router.
• Confirm, if the Internet light is showing activity (light blinking) on the
modem / router.
• Check network settings on the unit. Please refer to Online Owner’s
Manual.
• Power cycle (unplug the power cords) the modem and/or router for
30 seconds, then try reconnecting cords or push RESET buttons. Now
wait for the lights to show activity and try reconnecting.
• Check the cables connected the router.
• Turn on the DHCP function on the router.
Cannot use
the wireless
connection.
• Once you have activated the wireless connection please wait 30
seconds for the connection to be established after turning on the unit.
After this time you can try to access network features.
TROUBLESHOOTING
• Please refer to relevant topics on “TROUBLESHOOTING” in the
Online Owner’s Manual before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by
yourself. There are no user-serviceable parts inside. Place the unit into
the standby mode, unplug the power plug, and please visit
www.magnavox.com/support for Online Support or contact Customer
Service 1-800-605-8610.
SERVICING
Plug the AC adapter into the unit
(DC IN jack) and then into an AC outlet.
Confirm if your router is compatible
with our “Easy Connect (WPS)”. This
is the PBC (Push Button Configuration)
button located on most routers.
If the router does not have it, please
use the “Network List” setup.
Please enter the wireless
router security key. Key
content is case sensitive.
X6060UD_TB600MG2F_F7_SU_v1_FINAL_0708.indd 1X6060UD_TB600MG2F_F7_SU_v1_FINAL_0708.indd 1 2011/07/15 17:20:292011/07/15 17:20:29